Kramer Electronics SI-1VGA User Manual
The Kramer SI-1VGA Step-in Module
Congratulations on purchasing your Kramer SI-1VGA Step-in Module which is ideal for
boardrooms and presentation rooms.
The Kramer SI-1VGA is a VGA and unbalanced stereo audio remote control panel that
can, for example, fit into the Kramer TBUS-10 Table Connection Box (see
the K-POD301 Podium Table Bus. The SI-1VGA is used for remotely taking control of
a compatible switcher, for example, the VP-81KSi.
Figure 1 and Table 1 define the SI-1VGA Step-in Module.
Figure 1: SI-1VGA Step-in Module Front Panel and Rear View
Table 1: SI-1VGA Step-in Module Front and Rear Features
# Feature Function
1 VIDEO INPUT VGA 15-pin HD
(F) Connector
2 AUDIO INPUT 3.5mm Mini
Jack
3 STEP IN Button Press to switch the input to this remote control panel. LED lights yellow
4 AUDIO OUTPUT 3.5mm Mini
Jack
5 VIDEO OUTPUT VGA 15-pin
HD (F) Connector
Connect to the video source
Connect to the unbalanced stereo audio source
when active
Connect to the unbalanced stereo audio input of the switcher
Connect to the video input of the switcher. (The cable used must connect
all pins, for example, Kramer cable CP-GMA/GMA/XL)
Figure 3) or
Figure 2 shows the wiring connections of the SI-1VGA.
Figure 2: SI-1VGA Wiring Connections
To install and connect the SI-1VGA as illustrated in Figure 2:
Note: The following steps assume that you have video (with 15-pin HD (M)
connectors) and audio (with 3.5mm mini jacks) cables running from the switcher
inputs to the inside of either the TBUS-10 (see
Figure 3) or the
K-POD301, depending on which you are using.
1. Connect the video cable in the TBUS-10/K-POD301 to the 15-pin HD VIDEO
OUTPUT connector on the rear of the SI-1VGA.
2. Connect the audio cable in the TBUS-10/K-POD301 to the 3.5mm mini jack
AUDIO OUTPUT connector on the rear of the SI-1VGA.
3. Insert the SI-1VGA into the required cutout of the TBUS-10/K-POD301.
4. Insert the two screws to secure the module in place and tighten the screws.
5. Plug the video source (for example, a computer) into the 15-pin HD VIDEO
INPUT connector on the front panel of the SI-1VGA.
6. Plug the audio source (for example, a computer) into the 3.5mm mini jack AUDIO
INPUT connector on the front panel of SI-1VGA.
7. Press the STEP IN button to take control of the switcher input.
Figure 3 illustrates the SI-1VGA mounted in the T-BUS10.
P/N:
2900-000656
Rev:
1
SI-1VGA
Step-in Module
Figure 3: SI-1VGA Mounted in the T-BUS10
Product Details
Product details of the SI-1VGA are shown in Table 2.
Table 2: Product details
DIMENSIONS:
WEIGHT: 0.2kg (0.44lbs) approx.
ACCESSORIES: M3 x 6mm screws (2) black
1 Product details are subject to change without notice
8.9cm x 3.1cm x 2.4cm (3.5" x 1.2" x 0.94”) W, D, H
1
of the SI-1VGA
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
Uhttp://www.kramerelectronics.comU
E-mail: info@kramerel.com
P/N: 2900-000656 REV 1
Loading...