Kramer Electronics RC-43T User Manual
KRAMER ELECTRONIC S LTD.
USER MANUAL
MODEL:
RC-4 3T
Remote Controller
P/N: 2900-300301 Rev 1
RC-43T – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
4 Defining the RC-43T Remote Controller 5
5 Connecting the RC-43T 10
5.1 K-NET Wiring 11
5.2 Terminating the K-NET Bus 12
5.3 Installing the Configuration Software 12
6 Installing the RC-43T 13
6.1 Installing the Front Panel Buttons 13
6.2 Installing the RC-43T in the Wall Mounting Box 14
7 Technical Specifications 15
Figures
Figure 1: RC-43T Remote Controller Front Panel US Version 5
Figure 2: RC-43T Remote Controller Rear View US Version 6
Figure 3: RC-43T Remote Controller Exploded Rear View US Version 7
Figure 4: RC-43T Remote Controller Front Panel EU Version 8
Figure 5: RC-43T Remote Controller Rear View EU Version 9
Figure 6: Connecting the RC-43T Remote Controller 10
Figure 7: RC-43T K-Net Wiring US Version 11
Figure 8: RC-43T K-Net Wiring EU Version 11
Figure 9: RC-43T K-Net Bus Termination Switch US Version 12
Figure 10: RC-43T K-Net Bus Termination Switch EU Version 12
Figure 11: Mounting the RC-43T in a Wall Box US Version 14
RC-43T - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer RC-43T which lets you control an A/V
system with ease in applications such as, multimedia classrooms or conference
rooms.
2
RC-43T - Getting Started
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building
i
!
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
This user manual is written for the end user and does not contain details regarding
installation and configuration. This information can be found in the K-Config
Configuration Guide, available from http://www.kramerelectronics.com.
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
resolution, high performance cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer RC-43T away from moisture, excessive sunlight and
dust
RC-43T - Getting Started
3
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the wall
before installing
!
2.2 Safety Instructions
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Loading...