Kramer Electronics, Ltd.
USER MANUAL
Model:
PT-1Hs
Hs Delay Corrector
Contents
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your PT-1Hs Hs Delay Corrector 4
5 Using the PT-1Hs Hs Delay Corrector 5
6 Technical Specifications 7
Figures
Figure 1: PT-1Hs Hs Delay Corrector 4
Figure 2: PT-1Hs Hs Delay Correcto r ( U nderside Panel) 4
Figure 3: Connecting the PT-1Hs Hs Delay Corrector 6
Tables
Table 1: PT-1Hs Hs D elay Corrector Features 4
Table 2: PT-1Hs Hs Delay Corrector (Underside Panel) Featur es 4
Table 3: Technical Specifications of the PT-1Hs Hs Delay Corrector 7
i
Introduction
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creat iv e, and aff orda ble s oluti ons to t he vast range
of problems that confront the video, a u di o, presen t ation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the bes t ev en be tter! Our 1,000-plus different models
now appear in 11 groups
1
that are clearly defined by function.
Congratulations on purchasing your Kramer PT-1Hs Hs Delay Corrector,
which is ideal for:
• Any system using a twisted pair or c oax a ppl ic ation
• Presentation and multimedia applications
The package includes the following it ems:
• PT-1Hs Hs Delay Corrector
• Power adapter (12V DC Input)
2
• This user ma nual
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and
packaging materials for possible future shipme nt
• Review the contents of this user manual
• Use Kramer high performance high resolution cables
3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GR OUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Conne ctivity; GROUP 10: Accessories
and Rack Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
Overview
3 Overview
The Kramer Pico TOOLS PT-1Hs Hs Delay Corrector is a high performance
sync delay for computer graphics video signals on twisted pair or coax cables. It
corrects for horizontal picture shift in long cable runs when the horizontal sync
signal is delayed.
When sending a VGA signal from a PC to a monitor via twisted pair (or coax)
cabling, the picture information and syncs are delayed, but by different
amounts. This causes the display on the monitor to shift horizontally. The
PT-1Hs compensates by shifting the syncs accordingly, so that they line up
with the picture once again.
The PT-1Hs features:
• Resolution - up to UXGA
• HDTV compatibility
• Sync Polarity Settings - H & V switches for improved display com patibi lity
• Sync Delay Control - >+/-10% line time for the current res olut ion
• Ultra Compact Pico TOOLS™ - 4 units can be rack mounted si de-by-side
in a 1U rack space with the optional RK-4PT rack adapter
Note that the unit is transparent for the RGB signals, and
corrects only the H and V signals
Achieving the best performance m eans :
• Positio ning your PT-1Hs away from moisture and excessive sunlight
and dust, and avoiding interference from neighboring electrical
appliances
• Connecting only good quality conn ec tion cables , thu s avoi ding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
3
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your PT-1Hs Hs Delay Corrector
4
1
4 Your PT-1Hs Hs Delay Corrector
Figure 1 and Table 1 define the PT-1Hs:
Figure 1: PT-1Hs Hs Delay Corrector
Table 1: PT-1Hs Hs Delay Corrector Features
# Feature Function
1 XGA OUT HD15F Connector Connect to the XGA accepto r
2 ON LED Lights when receiving po w er
3 12V DC +12V DC connector for powering the unit
4 DELAY Trimmer Adjusts
5
XGA IN HD15F Connector Connect to the XGA source
Figure 2 and Table 2 define the PT-1Hs underside panel:
the delay of the Hs at the XGA output
Figure 2: PT-1Hs Hs Delay Corrector (Underside Panel)
Table 2: PT-1Hs Hs Delay Corrector (Underside Panel) Features
# Feature Function
1 HS Switch Slide the switch to the right 2 to change the HS polarity to NEGATIVE polari ty1;
2 VS Switch Slide the switch to the right2 to change the VS polarity to NEGATIVE polarity
1 Insert a screwdriver into the hole and carefully rotate it, to trim the delay level
2 By default, both switches are set to the right
slide the switch to the left (to +) to retain the polarity
slide the switch to the left (to +) to retain the polarity
1
;
Using the PT-1Hs Hs Delay Corrector
5 Using the PT-1Hs Hs Delay Correcto r
A delaye d sy nc c an be co rre ct ed by the PT-1Hs w hen using , for exam ple, th e
TP-121 and TP-122 to configure an XGA/Audio Line-to-Twisted Pair Transmitter
and Receiver system.
To connect the PT-1Hs via twisted pair cabling, as the example in
illustrates, do the following:
1. On the TP-121, connect the XGA source (for example, a laptop) to the
XGA INPUT HD15F connector
2. On the TP-122, connect
2
2
.
the XGA OUT HD15F connector to the XGA
IN HD15F connector on the PT-1Hs.
3. On the PT-1Hs, connect the XGA OUT HD15F connector to an acceptor
(for example, a display).
4. Connect the LINE OUTPUT RJ-45 connector on the TP-121 to the LINE
IN RJ-45 connector on the TP-122, via UTP cabling
2
(with a ra nge of
more than 300ft (>100m)).
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity on the PT-1Hs and on both
and the TP-122.
6. On the PT-1Hs, adjust
4
the DELAY level, if required.
The signal from the XGA source is transmitted via CAT 5 cable, dec oded and
converted at the XGA OUT HD15F conn ector on the TP-122. The sync delay
is corrected by the PT-1Hs, enabling a “lined-up” image to reach the XGA
acceptor.
Figure 3
3
the TP-121
1 Downgoing syncs
2 Refer to the Kramer TP-120 and TP-121 user manual for installation information
3 If you cannot connect the power to both the TP-121 and TP-122, you can just connect the power to the TP-122
4 Use a screwdriver to carefully rotate the trimmer, adjusting the DELAY level
5
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the PT-1Hs Hs Delay Corrector
6
Figure 3: Connecting the PT-1Hs Hs Delay Corrector
Technical Specifications
6 Technical Specifications
Table 3 defines the technical specifications:
Table 3: Technical Specifications
INPUT:
OUTPUT: 1 XGA on a 15-pin HD (F) connector
DELAY:
RESOLUTION: Up to UXGA
POWER SOURCE: 12 V DC, 40mA
DIMENSIONS: 6.22cm x 5.24cm x 2.41 cm (2.45" x 2.06" x 0.95") W, D, H.
WEIGHT: 0.040kg (0.09lbs.) approx.
ACCESSORIES: Power supply
OPTIONS: RK-4PT 19" rack adapter
1 XGA on a 15-pin HD (F) connector
More than ±10% line time for the current resolution
1
of the PT-1Hs Hs Delay Corrector
1 Specifications are subject to change without notice
7
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
LIMITED WARRANTY
WHO IS PROTECTED?
WHAT IS COVERED AND WHA T IS NO T COVERED
WHAT WE WILL P A Y F OR AND WHA T WE WILL N OT P A Y FOR
HOW YOU CAN GET WARRANTY SERVICE
LIMITA TION OF IMPLIED W ARRANTIES
EXCLUSION OF DAMAGES
CAUTION!
Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the
following terms.
Kramer
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
W e will pa y labor a nd mat erial ex pense s for c overe d items. W e will n ot pay for th e follo wing:
The liab ilit y of K ramer for an y ef fec tive p rod ucts is lim ite d to th e rep air or repl ace ment of the produ ct a t our optio n. Krame r shal l
not be li able for:
This war ranty gives y ou speci fic l egal ri ghts, a nd you m ay also have oth er rig hts, w hich var y from p lace to place.
All produc ts retur ned t o Kramer for ser vice m ust hav e prior a pprov al. Th is may b e obta ined from your deale r.
This equ ipmen t has be en teste d to de termi ne compl iance w ith t he requir emen ts of:
EN-5008 1: "Electr omagne tic co mpatibi lity (EMC);
generic emission standard.
Residen tial, c omme rcial an d light indus try"
EN-5008 2: "Electr omagne tic co mpatibi lity (EMC) gen eric i mmuni ty sta ndard.
Part 1: R esiden tial, comme rcial an d light indus try env ironme nt".
CFR-47: FCC* Rules and Regulations:
Part 15: “Ra d io frequency devices
Subpart B Unintentional radiators”
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
T AMP ER E D sti c ke r has be e n to r n,
3. Damage, det eriora tion o r malf unction resu lting f rom:
i) Accident, misuse, abuse, neglect, fire, water, li ghtnin g or oth er acts of nat ure
ii) Product modi ficati on, or f ailur e to foll ow in structi ons sup plied w ith t he produ ct
iii) Repair o r atte mpted re pair by a nyone not auth oriz ed by Kra mer
iv) Any shipment o f the pr oduct ( claim s must b e pres ented to the carr ier)
v) Remova l or i nstall ation of the pro duct
vi) Any other cause, which does not relate to a product defect
vii)Cartons, e quipme nt encl osure s, cabl es or accesso ries use d in c onjunct ion wi th the p roduct
1. Remo val or in stall ations char ges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
respon sibili ty of th e Krame r deal er from wh om the produ ct was pu rchas ed.
3. S hippin g char ges.
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
1. Da mage to other p roper ty cause d by defe cts in this prod uct, damages based upo n inco nvenie nce, lo ss of use of the pro duct, loss
of time, commercial lo ss; or:
2. An y other da mage s, w het her i nci den tal, co nsequ enti al o r o the rwi se. Some c oun tri es ma y n ot a llow li mita tion s o n ho w lon g a n
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limita tions a nd excl usions m ay no t apply to you.
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the supplie d DC powe r sup ply to f eed pow er to the mach ine.
Please use recommended interconnection cables to connect the machine to other components.
IF reattached, removed or otherwise interfered with.
* FCC and CE appro ved using S TP ca ble (f or twist ed pair pr oducts )
NOTE:
Part 1:
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments an d feedb a ck.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000702 REV 1
Loading...