Kramer Electronics FC-41 User Manual

KRAMER ELECTRONIC S LTD.

USER MANUAL

MODEL:

FC-41

HD-SDI to Component
Converter

P/N: 2900-000328 Rev 3

FC-41 – Contents

i

Contents

1 Introduction 1
2 Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3 Overview 4

3.1 Defining the FC-41 HD-SDI to Component Converter 4

4 Installing in a Rack 7
5 Connecting the FC-41 8

5.1 Connecting to the FC-41 via RS-232 9

6 Using the FC-41 HD-SDI to Component Converter 11

6.1 Locking the Front Panel 11

6.2 Operating the FC-41 HD-SDI to Component Converter 11

7 Technical Specifications 13
8 Communication Protocol 14

Figures

Figure 1: FC-41 HD-SDI to Component Converter Front Panel 5
Figure 2: FC-41 HD-SDI to Component Converter Rear Panel 6
Figure 3: Connecting the FC-41 HD-SDI to Component Converter 9
Figure 4: Crossed Cable RS-232 Connection 10
Figure 5: Straight Cable RS-232 Connection with a Null Modem Adapter 10

FC-41 - Introduction

1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.

Congratulations on purchasing your Kramer FC-41 HD-SDI to Component
Converter, which is ideal for the following typical applications:

 Broadcast and production video studios
 Postproduction and duplication studios
 Non-linear editing

2

FC-41 - Getting Started

Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).

This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.

i

!

2 Getting Started

We recommend that you:

 Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

 Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

 Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)

 Do not secure the cables in tight bundles or roll the slack into tight coils
 Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

 Position your Kramer FC-41 away from moisture, excessive sunlight and

dust

FC-41 - Getting Started

3

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the power cord that is supplied with the unit

Warning:

Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only

Warning:

Disconnect the power and unplug the unit from the wall
before installing

!

2.2 Safety Instructions

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4

FC-41 - Overview

3 Overview

The Kramer FC-41 is a high performance converter for HD-SDI. It converts an
HD-SDI input signal to component (Y, PB, PR) and RGB/HV signals.

In addition, the FC-41 features:

 Component and SDI outputs on BNC connectors, and an RGBHV output on

a 15-pin HD computer graphics video connector

 An SDI input which is reclocked and equalized, and distributed to two HD-

SDI outputs

 Output resolution which is the same as that of the input and is compatible

with 720p and 1080i up to 60Hz, as well as 1080p up to 30Hz

 ProcAmp controls, with memory for saving and loading 16 setups
 A component output with tri-level syncs
 A highly accurate color bar generator with eight built-in test patterns
 A lockable front panel to prevent unintentional tampering with the unit

The FC-41 converter can be controlled via its front panel with a user-friendly LCD,
and also has an RS-232 interface. It is housed in a 19” 1U rack mountable
enclosure, and is fed from a 100-240 VAC universal switching power supply.

3.1 Defining the FC-41 HD-SDI to Component Converter

This section defines the FC-41.