KRAMER ELECTRONIC S LTD.
USER MANUAL
MODELS:
650T
DVI–Coax Transmitter
650R
Coax–DVI Receiver
P/N: 2900-000536 Rev 10
650T/650R – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 650T DVI-Coax Transmitter 4
3.2 650R Coax-DVI Receiver 5
4 Your 650T/650R DVI/Coax Transmitter/Receiver 6
4.1 Your 650T DVI-Coax Transmitter 6
4.2 Your 650R Coax-DVI Receiver 7
5 Connecting the 650T/650R 8
6 Technical Specifications 10
Figures
Figure 1: 650T/650R HDMI/Coax Transmitter/Receiver 6
Figure 2: 650R Coax-DVI Receiver 7
Figure 3: DVI-to-Coax Transmitter and Receiver System 9
650T/650R - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Thank you for purchasing the Kramer DigiTOOLS® 650T DVI-Coax Transmitter
and/or Kramer DigiTOOLS®650R Coax-DVI Receiver, which are ideal for:
Boardroom and projection applications
Long-range multimedia extension for schools, hospitals, security, and stores
Upgrading a legacy analog installation to a digital installation
2
650T/650R - Getting Started
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check
if firmware upgrades are available (where appropriate).
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer 650T/650R away from moisture, excessive sunlight
and dust
650T/650R - Getting Started
3
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
!
2.2 Safety Instructions
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
4
650T/650R - Overview
3 Overview
This section describes the:
650T DVI-Coax Transmitter, see Section 3.1
650R Coax-DVI Receiver, see Section 3.2
3.1 650T DVI-Coax Transmitter
The Kramer DigiTOOLS® 650T is an DVI-coax transmitter that receives an DVI
signal, codes it, and transmits red, green, blue, clock and data signals, as well as
power, infrared and RS-232 control signals over coax cable to the 650R receiver.
Compatible with a Kramer transmitter and via a Kramer external remote IR receiver:
C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE.
The 650T features:
A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel) and up
to 720P with HDCP
Digital signal transmission without compression or conversion
HDTV compatibility and HDCP compliance
EDID pass-through that passes the EDID between the source and display
Bi-directional IR (Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE)
and RS-232 interfaces
IR and RS-232 data is available only when using a 5-plug coax cable and the power
coax line is connected.
Power feeding to the 650R
Plug and Play installation with no adjustments
650T/650R - Overview
5
3.2 650R Coax-DVI Receiver
The Kramer DigiTOOLS® 650R is a coax-DVI receiver that receives a coded coax
signal transmitted by the 650T. It decodes the R-G-B, clock and data components and
converts them to an DVI output.
The 650R features:
A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel) and up
to 720P with HDCP
HDTV compatibility and HDCP compliance
EDID pass-through that passes the EDID between the source and display
Bi-directional IR (Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE)
and RS-232 interfaces
IR and RS-232 data is available only when using a 5-plug coax cable and the power
coax line is connected.
Power feeding to the 650T
Plug and Play installation with no adjustments
6
650T/650R - Your 650T/650R DVI/Coax Transmitter/Receiver
#
Feature
Function
1
RED Output BNC Connector
Transmits the red signal to the 650R
2
GREEN Output BNC Connector
Transmits the green signal to the 650R
3
BLUE Output BNC Connector
Transmits the blue signal to the 650R
4
CLK Output BNC Connector
Transmits the clock signal to the 650R
5
PWR Output BNC Connector
Transmits power and the IR signal to the 650R
6
12V DC
+12V DC connector for powering the unit
7
IR Connector
Connects to an IR sensor or transmitter
Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE or
C-A35M/2IRE
8
IN / OUT LED
The IN LED Illuminates when an input source is
connected. The OUT LED illuminates when an output
acceptor is connected
9
RS-232 9-pin D-sub Connector
Connects to an RS-232 computer source
10
DVI IN Connector
Connects to a DVI source
11
ON LED
Illuminates when receiving power
4 Your 650T/650R DVI/Coax
Transmitter/Receiver
This section defines the 650T DVI-Coax Transmitter (see Section 4.1) and the
650R Coax-DVI Receiver (see Section 4.2)
4.1 Your 650T DVI-Coax Transmitter
Figure 1 defines the 650T:
Figure 1: 650T/650R HDMI/Coax Transmitter/Receiver
650T/650R - Your 650T/650R DVI/Coax Transmitter/Receiver
7
#
Feature
Function
1
RED Input BNC Connector
Receives the red signal from the 650T
2
GREEN Input BNC Connector
Receives the green signal from the 650T
3
BLUE Input BNC Connector
Receives the blue signal from the 650T
4
CLK Input BNC Connector
Receives the clock signal from the 650T
5
PWR Input BNC Connector
Receives power and the IR signal from the 650T
6
12V DC
+12V DC connector for powering the unit
7
IR Connector
Connects to an IR sensor or transmitter
Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE
or C-A35M/2IRE
8
IN / OUT LED
The IN LED Illuminates when an input source is
connected. The OUT LED illuminates when an
output acceptor is connected
9
RS-232 9-pin D-sub Connector
Connects to an RS-232 computer source
10
DVI OUT Connector
Connects to a DVI acceptor
11
ON LED
Illuminates when receiving power
4.2 Your 650R Coax-DVI Receiver
Figure 2 defines the 650R:
Figure 2: 650R Coax-DVI Receiver
8
650T/650R - Connecting the 650T/650R
Always switch off the power to each device before connecting it to your
650T/650R. After connecting your 650T/650R, connect its power and
then switch on the power to each device.
i
5 Connecting the 650T/650R
You can use the 650T DVI-Coax Transmitter and the 650R Coax-DVI Receiver to
configure an DVI-to-Coax Transmitter and Receiver system (see Figure 3).
To connect the DVI-to-Coax Transmitter and Receiver system as shown in the
example in Figure 3, do the following:
1. Connect an DVI source, for example, the DVI output from a Blu-ray DVD
player, to the 650T DVI IN connector.
2. Connect the 650R DVI OUT connector to the DVI acceptor, for example, a
projector.
3. If using a 4-plug coax cable or 4 coax cables:
Connect the 650T red, green, blue, and clock BNC connectors to the
650R red, green, blue and, clock BNC connectors
Connect 12V DC power supplies to both the 650T and the 650R (not
shown in Figure 3). The remote power and IR remote control functions
are not available
4. If using a 5-plug coax cable or 5 coax cables:
Connect the 650T red, green, blue, clock, and power BNC connectors
to the 650R red, green, blue, clock, and power BNC connectors
Connect one 12V DC power supply to either the 650T or the 650R (not
shown in Figure 3). Power and the IR remote control function are
transmitted over the power coax connection to the second device
Note: All coax cables must be the same length. There can be no more than 6
inches (15cm) difference in length between any of the cables.
5. Connect the power supply(s) to the mains electricity.
After all connections are made and the units are powered ON, the system
operates.
650T/650R - Connecting the 650T/650R
9
Figure 3: DVI-to-Coax Transmitter and Receiver System
10
650T/650R - Technical Specifications
INPUTS:
1 DVI connector
5 BNC connectors
OUTPUTS:
5 BNC connectors
1 DVI connector
PORT:
IR on a 3.5mm mini jack,
RS-232 on a 9-pin D-sub connector
MAX. DATA RATE:
Supports up to 6.75Gbps (2.25Gbps per graphic channel)
and up to 720P with HDCP
STANDARDS COMPLIANCE:
HDCP
POWER SOURCE:
12V DC, 270mA (650T)
12V DC 450mA (650T /
650R pair when powered
from 650T via Power
Connect with 60m cable)
12V DC, 160mA (650R)
12V DC 590mA (650T /
650R pair when powered
from 650R via Power
Connect with 60m cable)
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12.0cm x 7.0cm x 2.4cm (4.7" x 2.8" x 1.0"), W, D, H
WEIGHT:
0.3kg (0.7lbs) approx.
ACCESSORIES:
Power supply
OPTIONS:
Kramer external remote IR receiver,
C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE
Specifications are subject to change without notice at http://www.kramerelectronics.com
650T/650R Range Chart
Cable Type
Max Range
BC-5 (28 AWG)
50m
BC-5 (26 AWG)
60m
RG-59
115m
RG-6
150m
6 Technical Specifications
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N:
2900-000536
Rev:
10
!
SAFETY WARNIN G
Disconnect the unit from the power
supply before opening and servicing
Loading...