KRAMER ELECTRONIC S LTD.
USER MANUAL
MODEL:
Yard en 8 -T (SP K- C8 20 T)
Ceiling Tile Speaker
P/N: 2900-300306 Rev 2
Yarden 8-T – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the Yarden 8-T 5
4 Installing the Yarden 8-T 8
4.1 Choosing the Best Location 8
4.2 Connecting the wires 8
4.3 Determining the Number of Speakers Needed and their Location 9
4.4 Preparing the Yarden 8-T for Operation 11
4.5 Installing the Tile Size Speaker 12
5 Technical Specifications 16
Figures
Figure 1: Tile Size ESD Ceiling Speaker (that fits into the ceiling) 5
Figure 2: Yarden 8-T Top and Underside View 6
Figure 3: Yarden 8-T Side View 7
Figure 4: Yarden 8-T Terminal Blocks 8
Figure 5: Speaker Location in a Room—Yarden 8-T vs. Standard Ceiling Speakers 9
Figure 6: Stereo Layout 10
Figure 7: Mono Layout 11
Figure 8: Adjust Tap Selector 12
Figure 9: Fitting the Tile Size Speaker 13
Figure 10: Securing the Speaker to a Ceiling Anchor Point 14
Figure 11: Yarden 8-T in a Boardroom Setup 15
Yarden 8-T - Introduction
1
ESD™ (Equal Sound Dispersion) Ceiling Speakers are designed for
indoor dry locations and are suitable for use in air handling spaces.
i
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer Yarden 8-T Ceiling Tile Speaker,
which is ideal for overhead distributed audio for professional applications (music
and speech) and educational applications.
2
Yarden 8-T - Getting Started
Go to
http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to
check if firmware upgrades are available (where appropriate).
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
Do not open the housing of the speaker; doing so may reduce the
quality of the sound.
UL2043 – Fire Test for Heat and Visible Smoke Release for
Discrete Products and their Accessories Installed in Air-Handling
Spaces.
i
!
i
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer Speakers away from moisture, excessive sunlight and
dust
Yarden 8-T - Getting Started
3
2.2 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
4
Yarden 8-T - Overview
3 Overview
The ESD™ (Equal Sound Dispersion) Ceiling Tile Speaker is a high- performance
complete K-overage ESD ceiling speaker that can be mounted on the ceiling and
appears as a suspended ceiling tile.
The ESD ceiling speaker is constructed with a central driver and four pivoting
tweeters and is housed in an enclosed shallow enclosure.
The Kramer complete K-overage ESD provides unmatched sound response in a
suspended ceiling device for the professional and educational markets. This
means that you get the sound you need but with a reduced number of speakers.
The ESD ceiling speaker features:
Complete K-overage ESD™ – a patent pending design with 4 pivoting silk
dome tweeters that direct the sound, based on the room environment, for
equal sound dispersion (ESD)
2 sets of 70V/100V transformers
Mono/Stereo Switch – Toggles between Stereo mode (left in to left out +
right in to right out) and Mono mode (left in to left and right out)
Music/Speech Switch – Toggles between Music mode (full range) to Speech
mode (cuts low frequencies and clears up speech frequencies to enhance
intelligibility)
Wide, up to 180°, sound dispersion
One Kramer ESD speaker that replaces multiple standard speakers for quick
and easy installation
Excellent bass response that is optimized for music and high−quality voice
reproduction
A Kevlar(R) cone woofer
A 40W RMS power rating
Smooth frequency response
A shallow 4-inch depth (approx. 100mm) enclosure
Yarden 8-T - Overview
5
RoHS compliance
Compliance to RoHS means acting in full accordance with RoHS regulations that
restrict the use of certain dangerous substances commonly used in electronic
equipment
A speaker grille that is supported by two screws and held together with a set
of magnets
A plastic ring to secure the wires to the speaker
3.1 Defining the Yarden 8-T
Figure 1: Tile Size ESD Ceiling Speaker (that fits into the ceiling)
The speaker is easily installed and is also available with a 60 X 60cm grille for the
US and other markets, if required.
Figure 2 defines the Yarden 8-T top and underside view:
6
Yarden 8-T - Overview
Figure 2: Yarden 8-T Top and Underside View
Yarden 8-T - Overview
7
Ceiling Tile Speaker Features
#
Feature
Function
1
Speaker Tile Base
Tile size
2
Speaker Steel Enclosure
Shallow fireproof enclosure
3
Anchor Ring
Secure the speaker to the ceiling anchoring point
4
Wire Secure Ring
Insert the wire through the plastic ring to secure
the wires to the speaker
5
Tap Selector and Operation Switches
Control the speaker operation mode
6
INPUT Terminal Block Connector
Connect to the audio source (see Section 4.2)
7
Tweeters (4)
Pivoting silk
8
Woofer
Kevlar(R) surrounded by rubber
Ceiling Tile Speaker Features
#
Feature
Function
1
Stereo/Mono Selector Switch
Select stereo or mono operation
2
Music/Speech Selector Switch
Select the speaker operation mode:
Set to Music for boardrooms, offices, hotels and
restaurants (for background music)
Set to Speech for lecture halls and classrooms
3
Tap Selector Button
Use for tap setting, see Figure 8
Figure 3 defines the Yarden 8-T side view:
Figure 3: Yarden 8-T Side View
8
Yarden 8-T - Installing the Yarden 8-T
4 Installing the Yarden 8-T
This section explains how to install the Yarden 8-T, that is:
Choosing the best place to locate your speaker (see Section 4.1)
Connecting the wires (see Section 4.2)
Determining the number of speakers (see Section 4.3)
Preparing the speaker for operation (see Section 4.4)
Installing the tile size speaker (see Section 4.5)
4.1 Choosing the Best Location
Ideally, locate the speaker above the main listening area. Before doing so, be sure
that:
The desired location is free of obstructions, such as electrical piping,
AC ducts or water lines, and so on
There is enough space behind the mounting surface for the speaker
The rear side of the speaker is not blocked by wall studs or other objects
4.2 Connecting the wires
Figure 4 illustrates the terminal block pinout for the mono and stereo setups:
Figure 4: Yarden 8-T Terminal Blocks
Yarden 8-T - Installing the Yarden 8-T
9
The red wires connect to the + pins and the black wires connect to
the – pins.
i
4.3 Determining the Number of Speakers Needed and their Location
When installed in a room with a standard ceiling height of 2.7m (8.8 feet), the
optimal distance between the speakers is about 10 meters. The speaker should be
installed lengthwise relative to the shape of the room. The example in Figure 5
shows the Yarden 8-T installed in a 10m x 5m room. A 10m x 5m room size
requires only one ESD speaker for full room coverage rather than four standard
ceiling speakers.
Figure 5: Speaker Location in a Room—Yarden 8-T vs. Standard Ceiling Speakers
To achieve optimum sound quality and ESD (Equal Sound Dispersion):
Select the appropriate output from the amplifier to use with the speaker
(either stereo or mono)
10
Yarden 8-T - Installing the Yarden 8-T
If the size of the room only requires a single speaker, we recommend using the
mono/stereo speaker for speech or music as required (see Figure 6 and
Figure 7)
Figure 6: Stereo Layout
If the size of the room requires more than one speaker, use two or more
mono speaker models (see Figure 7)
Yarden 8-T - Installing the Yarden 8-T
11
Figure 7: Mono Layout
4.4 Preparing the Yarden 8-T for Operation
Once the location of the speaker is determined, prepare the speaker for operation
as follows:
1. Move each of the pivoting tweeters outward in an angle that is suited to the
room shape and size.
2. Run the wires from the amplifier through the ceiling.
3. Remove the ceiling tile at the place where you plan to install the speaker.
4. Connect the speaker wires to the speaker terminals (see Figure 4) from the
adjacent ceiling tile opening.
5. Adjust the speaker to the appropriate tap setting (see Figure 8).
Set the tap according to the power requirements of the speaker based on its location in the
room (for example, a speaker located in a remote corner may require additional power)
12
Yarden 8-T - Installing the Yarden 8-T
Do not select the maximum tapping position when using 100V (in
both the stereo and mono modes).
i
Figure 8: Adjust Tap Selector
6. Place the speaker temporarily in place, and test the audio quality.
7. If you are satisfied, disconnect the amplifier and remove the speaker from
the ceiling. If not, change the position of the tweeters and check the audio
quality again until you are happy with the results.
8. Fit the speaker grille over the speaker underside and tighten with screws.
4.5 Installing the Tile Size Speaker
1. Drop the speaker into the ceiling tile space.
Make sure that you position the speaker lengthwise relative to the room
shape (see Figure 9).
Yarden 8-T - Installing the Yarden 8-T
13
Figure 9: Fitting the Tile Size Speaker
2. Secure the speaker by connecting the speaker support ring to an
independent secure ceiling anchor point (see Figure 10) as appropriate.
The anchor prevents the speaker from falling if the tile itself comes out or falls apart.
14
Yarden 8-T - Installing the Yarden 8-T
Do not over-tighten the screws. It may cause damage to both the
speakers and the surface.
i
Figure 10: Securing the Speaker to a Ceiling Anchor Point
3. If required, daisy-chain the next speaker (see Section 4.3).
Figure 11 shows an example of how the Yarden 8-T can be installed in a
boardroom setup:
Yarden 8-T - Installing the Yarden 8-T
15
Figure 11: Yarden 8-T in a Boardroom Setup
16
Yarden 8-T - Technical Specifications
Audio and Power
DESCRIPTION:
Ceiling tile speaker
FREQUENCY RESPONSE:
65Hz to 20kHz @ -10dB
80Hz to 20kHz @ ±3dB
WOOFER:
8” (200mm) Kevlar(R) with rubber surround
TWEETER:
4 x 0.75” (20mm) pivoting titanium dome
IMPEDANCE:
8Ω stereo, 4Ω mono (transformer tap in off position)
TRANSFORMER TAPS:
Stereo: 70V – 3.75W/7.5W/15W/30W; 100V – 7.5W/15W/30W
Mono: 70V – 7.5W/15W/30W/60W; 100V – 15W/30W/60W
SENSITIVITY:
87dB 1W @1m
MAX SPL:
Continuous: 102dB
Peak: 105dB
POWER HANDLING:
40W RMS
110W continuous program
CROSSOVER FREQUENCY:
2.175kHz
DIRECTIVITY FACTOR (Q):
9.43, averaged 1kHz to 10kHz
DIRECTIVITY INDEX (DI)
9.5dB averaged 1kHz to 10kHz
INPUT CONNECTORS:
Terminal block connectors
CONTROLS:
Mono/Stereo select switch, Music/Speech select switch
Shipping and Installation
MATERIALS:
Frame, steel grilles (595x595mm, 600x600mm), cable holder
DIMENSIONS:
60cm x 60cm x 10cm (tile size)
59.5cm x 59.5cm x 10cm (tile size) for any region with
suspended ceiling tiles of 595mm
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
WEIGHT:
8.8 kg (19.3lbs) approx.
SHIPPING WEIGHT:
10.5 kg (27.1lbs) approx.
ACCESSORIES:
2 available grilles (595x595mm, 600x600mm)
COLORS:
Available in white
Specifications are within a 10% tolerance and are subject to change without notice at
http://www.kramerelectronics.com
5 Technical Specifications
This page is intentionally left blank
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N:
2900-300306
Rev:
2
!
SAFETY WARNIN G
Disconnect the unit from the power
supply before opening and servicing
Loading...