Kramer WSI-1VGA Installation Instructions Manual

The

Congratulations on purchasing your Kramer WSI-1VGA Step-in Module which is ideal
for boardrooms and presentation rooms.

Kramer WSI-1VGA Step-in Module

The Kramer WSI-1VGA is a VGA and unbalanced stereo audio, remote control panel
that can, for example, fit into the Kramer TBUS-1A, TBUS-4i or TBUS-5i Table
Connection Boxes (see

Figure 3). The WSI-1VGA is used for remotely taking control of

a compatible switcher, for example, the VP-81KSi.

Figure 1 and Table 1 define the WSI-1VGA Step-in Module.

Figure 1: WSI-1VGA Step-in Module Front and Rear Panel View

Table 1: WSI-1VGA Step-in Module Front and Rear Panel Features

# Feature

Function

1 STEP-IN Button Press to select the switcher input to which the WSI-1VGA is connected

2 PC INPUT VGA 15-pin HD (F)

Connector

Connect to the video source (up to UXGA)

3 AUDIO INPUT 3.5mm Mi ni

Jack

Connect to the unbalanced stereo audio source

4 Audio Output 3.5mm Mini

Jack

Connect to the unbalanced stereo audio input of the switcher

5 Video Output VGA 15-pin HD

(F) Connector

Connect to the video input of the switcher. (The cable used must connect
all pins, for e xample, Kramer cable CP-GM/GM or C-GMA/GMA)

Figure 2 shows the wiring connections for the WSI-1VGA.

Figure 2: WSI-1VGA Wiring Connections

To install and connect the WSI-1VGA as illustrated in Figure 2:

Note: The following steps assume that you have video (with 15-pin HD (M)

connectors) and audio (with 3.5mm mini jacks) cables running from the switcher
inputs to the inside of the TBUS-1A (see

Figure 3).

1. After removing the required blanking panel, insert the WSI-1VGA into the
required opening of the TBUS-1A.

2. Insert the four screws to secure the module in place and tighten the screws.

3. Connect the video cable in the TBUS-1A to the 15-pin HD video output connector
on the rear of the WSI-1VGA.

4. Connect the audio cable in the TBUS-1A to the 3.5mm mini jack audio output
connector on the rear of the WSI-1VGA.

5. Plug the video source (for example, a computer) into the 15-pin HD PC INPUT
connector on the front panel of the WSI-1VGA.

6. Plug the audio source (for example, a computer) into the 3.5mm mini jack AUDIO
INPUT connector on the front panel of WSI-1VGA.

7. Press the STEP IN button to take control of the switcher input.

Figure 3 illustrates the WSI-1VGA mounted in the TBUS-1A.

Figure 3: WSI-1VGA Mounted in the TBUS-1A

Product Details

Product details of the WSI-1VGA are shown in Table 2.

Table 2: Technical Specifications1 of the WSI-1VGA

DIMENSIONS: Dual insert size—8cm x 8cm x 4.1cm (3.2" x 3.2" x 1.6”) W, D, H

WEIGHT : 0.2kg (0.44lbs) approx.

ACCESSORIES: M3 x 6mm screws (2) black

1 Product details are subject to change without notice

WSI-1VGA

Step-in Module

Installation Instructions

For the latest information on our products and a list of Kramer distributors,

visit our Web site at

Uwww.kramerelectronics.comU

Kramer Electronics, Ltd.

Web site: www.kramerelectronics.com

E-mail: [e-mail]

P/N: 2900-000756 REV 1

PN:

2900-000756

Rev:

1