Page 1
WP-SW2-EN7 Panel Set Quick Start
P/N:
2900- 301568QS
Rev:
1
Scan for full manual
WP-SW2-EN7 Panel Set Quick Start Guide
This guide helps you install and use your WP-SW2-EN7 Panel Set for the first time.
Go to www.kramerav.com/downloads/WP-SW2-EN7 Panel Set for further details.
Step 1: Check what’s in the box
For EU: 1 faceplate, 1EU frame, and 1 UK frame
1 Quick start guide
For the US: 2 US-D faceplates, 1 US-D frame bracket and 1 US-D frame
Step 2: Install the Panel Set
After mounting the device (see www.kramerav.com/downloads/WP-SW2-EN7 Panel Set) mount the faceplates (US) and
frames as shown in the illustrations below:
US Version
European Version
We recommend that you use any of the
following standard 2 gang in-wall
junction boxes (or their equivalent):
• US-D: 2 gang US electrical junction
boxes.
• EU: 2 gang in-wall junction box,
with a cut-hole diameter of 2x68mm
and depth that can fit in both the
device and the connected cables
(DIN 49073).
• UK: 2 gang in-wall junction box (BS
4662), 135x75mm (W, H) and
depth that can fit in both the device
and the connected cables.
EU/UK: 2 gang on-wall junction box
(use the recommended Kramer onwall box available at
www.kramerav.com/product/WP
-SW2-EN7 Panel Set
DECORA® design frames
are included in US-D
models.
DECORA® is a registered
trademark of Leviton
MANUFACTURING Co., Inc.
Loading...