
WP-789R EU PANEL SET, WP-789R US PANEL SET
Quick Start
WP-789R EU / WP-789R US PANEL SET Quick
Start Guide
This guide helps you install and use your WP-789R EU / WP-789R US PANEL SET for the first time.
Go to www.kramerav.com/downloads/WP-789R EU PANEL SET or
www.kramerav.com/downloads/WP-789R US PANEL SET to download the latest user manual.
Step 1: Check what’s in the box
For EU: 1 EU faceplate and 1 UK faceplate
For the US: 1 US-D blank faceplate, 1 US-D faceplate, 1 US-D frame bracket and 1 US-D frame
Step 2: Install the PANEL SET
After mounting the device (see www.kramerav.com/downloads/WP-789R) mount the faceplates (US) and frames as
shown in the illustrations below:
DECORA® design frames are included in US-D models.
DECORA® is a registered trademark of Leviton Manufacturing Co., Inc.
We recommend that you use any of the following standard 2 gang in-wall junction boxes (or their equivalent):
• US-D: 2 gang US electrical junction boxes.
• EU: 2 gang in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
• UK: 2 gang in-wall junction box (BS 4662), 135x75mm (W, H) and depth that can fit in both the device and the
connected cables.
• EU/UK: 2 gang on-wall junction box (use the recommended Kramer on-wall box available at
www.kramerav.com/product/WP-789R