Page 1
Congratulations on purchasing your Kramer Wall Plate Inserts (each is supplied with the
required screws)! They are ideal for the following applications: board, conference and training
rooms, presentation systems, and home theater. Each insert can be used with the Kramer
WP Frame or with one of our TBUS products.
W-COM1
The W-COM1 is a single-insert COM port on a 9-pin D-sub connector (for use with RS-232,
RS-422, and RS-485) with a terminal block at the rear.
Figure 1: W-COM1 Wall Plate Insert
The terminal block PINOUT is as follows:
WAV-6YC
The WAV-6YC is a one-gang wall plate insert with pass through connectors for:
• Computer graphics video on an 15-pin HD connector and unbalanced stereo audio on a
3.5mm mini plug connector flush against the front panel, and a short flexible 12cm (4.7”)
cable with a 3.5 mini jack connector at the rear
• s-Video on a 4-pin connector
• Composite video on a yellow RCA connector
• Unbalanced stereo audio on RCA connectors (white for L and red for R)
The WAV-6YC is available in three versions: one for Belgium and Germany, one for England
and Europe (except Belgium and Germany), and one for the United States:
Figure 2: W-COM1 Pinout
Figure 3: WAV-6YC Wall Plate Insert
Page 2
!
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
KRAMER ELECTRONICS LTD.
Wall Plate Inserts
Series
MODEL:
Wall Plate Insert
Wall Plate Insert
For the latest information on our products and a list of Kramer
distributors, visit our Web site where updates to this user manual may be
found.
W- COM1
WAV-6YC
We welcome your questions, comments, and feedback.
Web site:
E-mail:
www.kramerelectronics.com
info@kramerel.com
P/N: 2900-000288 Rev 4
Loading...