Kramer VP-510 Users Manual

USER MANUAL

MODEL:

VP-510

4K to 2K Down-Converter

P/N: 2900-300449 Rev 2

www.kramerAV.com

Contents

1 Introduction 1
2 Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instruc ti o ns 2

2.3 Recycling Kramer Products 3

3 Overview 4

3.1 Defining the VP-510 4K to 2K Down-Converter 5

4 Connecting the VP-510 6
5 Technical Specifications 7

Figures

Figure 1: VP-510 4K to 2K Down-Converter 5
Figure 2: Connecting the VP-510 4K to 2K Down-Converter 6

VP-510 – Contents i

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined by
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.

Congratulations on purchasing your Kramer VP-510 4K to 2K Down-Converter.
This product, which incorporates HDMI™ technology, is ideal for:

• Allows the use of legacy equipment with the latest 4K signals

• Multimedia, board rooms, and video-conferencing

VP-510 - Introduction 1

available (where appropriate).

Caution:

There are no operator serviceable parts inside the unit

provided with the unit

before installing

2 Getting Started

We recommend that you:

• Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

• Review the contents of this user manual

Go to www.kramerav.com/downloads/VP-510 to check for up-to-date user
manuals, application programs, and to check if firmware upgrades are

2.1 Achieving the Best Performance

To achieve the best performance:

• Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)

• Do not secure the cables in tight bundles or roll the slack into tight coils

• Avoid interference from neighbouring electrical appliances that may adversely

influence signal quality

• Position your VP-510 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Warning:

Warning:

2 VP-510 - Getting Started

Use only the Kramer Electronics power supply that is

Disconnect the power and unplug the unit from the wall

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims
to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country go
to our recycling pages at http://www.kramerelectronics.com/support/recycling/

.

VP-510 - Getting Started 3

3 Overview

The VP-510 is a down-converter for 4K HDMI signals. The unit takes a 4K
resolution input, provides a loop output and down-converts it to 2K resolution. It
allows the use of legacy equipment with the latest 4K signals.

When used with a non-4K (or unsupported 4K) input source, the input is routed to
the output with no down-conversion or scaling.

The VP-510 features:

• A maximum data rate of 10.2Gbps (3.4Gbps per graphic channel)

• HDMI signal downscaling from 4K UHD to 2K / 1080p

• HDMI support for 3D, Deep Color, x.v.Color™, Dolby® TrueHD, Dolby Digital

Plus, DTS−HD® and 7.1 multi−channel audio

• Support for HDMI 1.4 and HDCP 1.4

• 4K resolution down-scaling for 4096×2160p@24Hz and

3840×2160p@24/25/30Hz

• HDMI signal bypass for resolutions that are not down-scaled

• A simultaneous HDMI output (loop)

• EDID bypass of loop output

4 VP-510 - Overview

1

ON LED

Lights when the unit is power on

2

BYPASS LED

Lights when a source is connected and the signal is
LED

INPUT HDMI Connector

Connects to an HDMI source

LOOP HDMI Connector

Connects to a display

7

OUTPUT HDMI Connector

Connects to a 1080p/2K acceptor

8

PROG USB Connector

Used for upgrading the firmware

5V DC Connector

Connects to a 5V DC power source

3.1 Defining the VP-510 4K to 2K Down-Converter

This section defines the VP-510.

Figure 1: VP-510 4K to 2K Down-Converter

# Feature Function

3

4K IN LED Lights when a 4K source that can be downscaled is

4

OUTPUT CONNECTED

5
6

9

VP-510 - Overview 5

bypassed to the OUTPUT connector

connected. The downscaled signal is available on the
OUTPUT connector

Lights when an output device is connected

then switch on the power to each device.

the loop output.

4 Connecting the VP-510

Always switch off the power to each device before connecting it to
your VP-510. After connecting your VP-510, connect its power and

Note: The EDID is read through the loop output. The last EDID
connected is saved as a default for when there is no connection to

To connect the VP-510 as illustrated in the example in Figure 2:

1. Connect a 4K HDMI source (for example, a Blu-ray player) to the INPUT
HDMI connector.

2. If desired, connect an HDMI acceptor (for example, a 4K display) to the
LOOP HDMI connector.

3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a
2K display).

4. Connect a 5V DC power supply to the 5V DC connector to power on the
device.

Figure 2: Connecting the VP-510 4K to 2K Down-Converter

6 VP-510 - Connecting the VP-510

INPUTS:

1 HDMI (looping) on an HDMI connector

OUTPUTS:

1 HDMI and 1 loop on HDMI connectors

PORT:

1 mini-USB for firmware up gr adi n g

MAX. DATA RATE:

10.2Gbps (3.4Gbps pe r gra phic c ha nn el)

INDICATOR LEDS:

ON, BYPASS, 4K IN, OUTPUT CONNECTED

RESOLUTIONS:

@29.97/30Hz, 4096x2160 @23.98/24Hz

POWER CONSUMPTION:

5V DC, 550mA

OPERATING

0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

12.0cm x 7.2cm x 2.4cm (4.72” x 2.81” x 0.9 6” ) W , D, H

WEIGHT:

0.16kg (0.35lbs)

INCLUDED ACCESSORIES:

Power supply

OPTIONAL:

RK-3T 19” rack adapter

5 Technical Specifications

DOWNSCALED 4K

TEMPERATURE:

Specifications are subject to change without notice
For the most updated resolution list, go to our Web site at http://www.kramerelectronics.com

3840x2160 @23.98/24Hz, 3840x2160 @25Hz, 3840x2160

VP-510 - Technical Specifications 7

P/N:

2

900

-30

0449

Rev:

2

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors,
visit our Web site to find updates to this user manual.

We welcome your questions, comments, and feedback.

www.kramerAV.com
[e-mail]