2x1 Computer Graphics Video & Stereo Audio Standby Switcher
The VP-211K is a high-
performance switcher for
computer graphics video
signals, with resolutions up
to and exceeding UXGA, and
unbalanced stereo audio
signals. When configured as
a standby switcher, it
switches to the secondary
input upon loss of the primary
input.
High Bandwidth - 300MHz (-3dB).
Looping Input - Input 1.
Automatic Standby Switching - Switches from
secondary input to primary input when a
signal is detected.
Control - Automatic or contact closure.
Kr-isp® Advanced Sync Processing - Ensures
compatibility with a wide range of computers
(even if the sync level is too low) by restoring
the sync signal waveform. Kr-isp® advanced
sync processing can be enabled or disabled.
Primary Input - Selectable.
Active Input LED Indicators.
Compact Kramer TOOLS™ - 3 units can be
rack mounted side-by-side in a 1U rack space
with the optional RK-3TR rack adapter.
2 computer graphics video on
15-pin HD connectors;2
unbalanced stereo audio on
3.5mm mini audio connectors.
1 computer graphics video on a
15-pin HD connector;1 computer
graphics video on a 15-pin HD
connector (input #1 active
loop);1 unbalanced stereo audio
on a 3.5mm mini audio
connector.
Video: 1.6Vpp; Audio: >10.5Vpp.
Video: 300MHz; Audio: >100kHz.
Video: 71dB; Audio: 71dB
weighted.
Video: –59dB @5MHz; Audio: <–
66dB @1kHz.
Contact closure remote control,
input default selection switch.
12.1cm x 7.18cm x 2.42cm
(4.76" x 2.83" x 0.95") W, D, H.
Power supply (5V/2.6A),
mounting bracket.