Page 1
INTERFACES AND SYNC PROCESSORS
4.27
KRAMER ELECTRONICS, Ltd
DIRECTORY OF PRODUCTS 2006 WWW.KRAMERELECTRONICS.COM
VP-100
Computer Graphics Video to RGB/HV/S Format Converter
FEATURES
■
The VP-100 is a high performance format converter for
computer graphics video signals. It converts a computer
graphics video signal on a 15-pin HD connector to either
RGBS, RGsB, or RGBHV video signals on BNC connectors.
High Bandwidth
■
Control
■
Looping Input.
■
Selectable Input Signal Termination.
■
ID Bit Control.
■
EQ (Peaking) Control.
■
Active Line Amplification Circuitry.
■
Compact Size
- H/V sync shift & sync selection.
of compact, high quality and cost effective solutions.
- 350MHz (- 3dB).
- Part of the Kramer TOOLS™ family
PC Graphics
Source
Data
Projector
Local Display
TECHNICAL SPECIFICATIONS
INPUTS: Looping analog red, green, blue signals
OUTPUT S: 1 x analog red, green (with or without composite
VIDEO BANDWIDTH (- 3dB): 350MHz.
DIFF. GAIN: 0.07%.
DIFF. PHASE: 0.03 Deg.
K-FACTOR: < 0.05%.
VIDEO S/N RATIO: 71dB.
CONTROLS:
EQ. CONTROL: 0 to + 9.7dB @ 5MHz.
POWER SOURCE: 12VDC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm
WEIGHT: 0.3kg. (0.67lbs.) approx.
ACCESSORIES Power supply, mounting bracket.
OPTIONS: RK-T3 19 inch rack adapter.
- 0.7 Vpp/75Ω H & V sync, TTL level,
on an HD15F connector.
sync), blue signals – 0.7Vpp/75Ω H&V syncs
-TTL level (Hi-Z load) or analog level (75Ω load) on
BNC connectors. Composite Sync - TTL levels
(Hi-Z load) or analog level (75Ω load).
Cable EQ. control, H & V sync shift
switches and controls, G/sync on green
switch, Hs/Cs switch, ID bit switch,
input termination switch.
(4.7” x 2.95” x 0.98”, W, D, H).
Loading...