P/N:
290 0 - 300 7 62QS
Rev:
3
VIAware Quick Installation Guide
1. INTRODUCTION
With VIAware, you can use all the advanced wireless presentation and
collaboration tools offered by VIA Campus on your own PC. VIAware
enhances collaborative meetings in corporate environments and interactive
learning in education and training environments.
2. REQUIREMENTS
A desktop PC is required with the following minimum specifications:
Processor: 2.9GHz quad core, low power consumption
Memory: minimum 4GB, high speed
Storage: minimum 60GB
LAN Port: Gigabit LAN port, 10/100/1000/auto
OS: Windows® 10 – 64 bit
3. INSTALLATION INSTRUCTIONS
3.1. CREATE LOCAL USER
1. Click > Start > Settings > Accounts
2. In the left menu, select Family & other users.
3. Click Add someone else to this PC.
4. At the bottom, click I don’t have this person’s sign-in information.
5. Click Add a user without a Microsoft account.
6. Enter a username and, if desired, a password.
7. Select the newly created local user and change the account type from Standard User
to Administrator.
VIAware Quick Installation Guide (P/N: 2900-300762QS REV 3)
3.2. INSTALLING VIA
1. Log in to the user account created in Create Local User.
2. Copy the VIASetup_Software.exe to a local folder.
Note: This step eliminates delay and errors due to connectivity issues.
3. Double-click VIASetup_Software.exe.
The message appears: “Do you want to allow the following program from an
unknown publisher to make changes to this computer?”
4. Click Yes and wait for the following window to appear. It may take a couple of
minutes.
5. Click Install and wait for the progress bar to fill.
Note: Blank screens appear that require no input from user.
6. When the Completing the VIA Setup Wizard screen appears, select Yes,
restart the computer now and click Finish.
The computer restarts and logs in to the new account created in
Create Local User.
7. Connect your PC to a local network. The launch screen appears.
Your VIA software installation is now ready to use.
For more information, see the VIAware User’s Manual on the Kramer website.
3.3. LICENSE ACTIVATION
Your VIAware is active for 14 days after installation.
VIAware is available as a one-time license with optional annual upgrade
subscriptions or as an annually recurring subscription.
To get your license activation key, contact Kramer’s Sales Department.
4. UNINSTALLATION INSTRUCTIONS
4.1. UNINSTALLING THE APPLICATION
1. Go to Control Panel > Programs and Features and uninstall the VIAware
application.
Note: If you have already uninstalled the VIAware application, continue with
step 2.
2. Download the “uninstall-viaware.bat” file from the VIAware webpage to the
computer where the VIAware application is installed.
3. Right-click the “uninstall-viaware.bat” file and select Run as Administrator.
Note: You must have Administrator credentials for this step.
When the file finishes running, the Command Prompt window displays a “file
name not found” message, indicating that the VIAware application has been
completely uninstalled. Only the wallpaper is still displayed and will disappear
after performing the steps in the next section.
4. Log off from the current user account.
4.2. DELETING THE USER ACCOUNT
1. Log in to your computer as Administrator.
2. From the Start menu, navigate to Settings > Accounts.
3. In the left menu, select Family & other users.
4. Click the account created in Section 3.1 and click Remove.
A confirmation message is displayed.
5. Click Delete account and data.
Loading...