Kramer TP-575 Specifications

kramere le ctronics.com

http://www.kram erelectronics .com /products /model_print_page.asp?

i=2215&pfstyle=wp&country=6

TP-575-1:2 HDMI Twisted Pair Receiver & Transceiver

The TP−575 is a twisted pair (DGKat) line
driver and DA for HDMI encoded twisted pair
signals. The unit receives a twisted pair signal
and outputs both an HDMI and twisted pair
signal to a compatible receiver.

TP-575 FEATURES

Max. Data Rate - 2.25Gbps per graphic

channel.

HDTV Compatible.

HDCP Compliant.

HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, HDMI Uncompressed Audio Channels,

Dolby TrueHD, DTS−HD).

DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control
and communication to signals that run over twisted pair cables. We strongly recommend using Kramer
DGKat™ cables designed specifically for optimum performance.

3D Pass-Through.

EDID PassThru - Passes EDID/HDCP signals from source to display.

HPD Pass Thru - Passes Hot Plug Detect signals from display to source.

Active Input/Output LED Indicators.

Syste m Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524

cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up
to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat723 cable.

Cable - For optimum range and performance, use Kramer's BC−DGKat524, BC−DGKat623 and
BC−DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics
card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not
reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

Output Signal Re clocking - Daisy chains up to 6 receivers for maximum range of 600m using
shielded BC−DGKat723 cable at 1080i. (For other cables and resolutions, see System Range above.)

Powe r Conne ct System™ - A single connection to the TP−575 powers the transmitter, receiver and
line driver units.

Compact M egaTOOLS™ - 2 units can be rack mounted side−by−side in a 1U rack space with the
optional RK−T2B universal rack adapter.

TP-575 TECHNICAL SPECIFICATIONS

INPUT:1 TP on an RJ−45 connector.

OUTPUTS:1 TP on an RJ−45 connector, 1 HDMI connector.

BANDWIDTH:Supports up to 2.25Gbps bandwidth per graphic channel.

COMPLIANCE WITH HDMI STANDARD:Supports HDMI and HDCP.

CONTROLS:EDID SETUP button.

INDICATOR LEDs:IN, OUT 1 (LINE), OUT 2 (HDMI), and ON LEDs.

POWER SOURCE:12V DC, 950mA.

DIMENSIONS:18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 0.9") W, D, H.

WEIGHT:0.3kg (0.67lbs) approx.

ACCESSORIES:Power supply.

OPTIONS:RK−3T 19” rack mount, Kramer remote external receiver, Kramer BC−DGKat524 (CAT 5

24AWG), BC−DGKat623 (CAT 6 23AWG) and BC−DGKat7a23 (CAT 7a 23 AWG) cables, HDMI/HDMI
male−to−male cables.