Kramer Electronics, Ltd.
USER MANUAL
Models:
TP-551HDCP, DVI Line Transmitter
TP-552HDCP, DVI Line Receiver
Contents
i
Contents
1 Introduction 1
2 Getting Starte d 1
2.1 Quick Start 1
3 Overview 3
3.1 Recommenda ti ons for Achieving the Best Performance 3
4 Your DVI Line Transmitter / Receiver 4
4.1 Your TP-551HDCP DVI Line Transmitter 4
4.2 Your TP-552HDCP DVI Line Receiver 5
5 Connecting the TP-551HDCP and TP-552HDCP 6
5.1 Adjusting the EQ. Level via the EQ. Setup DIP-switches 6
5.2 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 8
6 Technical Specifications 9
Figures
Figure 1: TP-551HDCP DVI Line Transmitter 4
Figure 2: TP-552HDCP DVI Line Receiver 5
Figure 3: Connecting the TP-551HDC P / TP-552 H D C P DVI Line Transmitter/ Receiver 7
Figure 4: CAT 5 PINOUT 8
Tables
Table 1: TP-551HDCP DVI Line Transmitter Features 4
Table 2: TP-552HDCP DVI Line Receiver F eatures 5
Table 3: Recommended Equalization Levels DIP-switch Setup 6
Table 4: CAT 5 PINOUT 8
Table 5: Technical Specifications of the TP-551HDCP and TP-552HDCP 9
Introduction
1 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of uni que, creat iv e, an d aff ordabl e s oluti ons to t h e vast range
of problems that confr ont th e video, audio, presentation , an d broadcas t ing
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better! Our 1,000-plus different models
now appear in 11 grou ps
1
Congratulations on purchasing your Kramer DigiTOOLS® TP-551HDCP
DVI Line Transmitter and Kramer DigiTOOLS® TP-552HDCP DVI Line
Receiver which are ideal for:
that are clearly defined by function.
• Home theater, presentatio n and multimedia applications
• Rental and stagi ng
The package includes the following:
• TP-551HDCP and/or TP-552HDCP
• Power adapter (5V DC Input)
• This user manual
2
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save t he original box an d packaging
materials for possible fut ure shipment
• Review the contents of this user manual
• Use Kramer high performance high resolution cables
3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan
Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack
Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from the Internet at
http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at
http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
Overview
3 3
3 Overview
The Kramer TP-551HDCP and TP-552HDCP constitute a h igh quality DVI
line transmitter / receiver system using two STP cables.
This transmitter / receiver pa ir features:
• System Range
1
• Cables – For optimum range and performance, use Kramer's
BC-DGKat524, BC-DGKat623 and BC-DGKat7a23
- Up to 60m (197ft) at XGA , or up t o 30m (98ft) at
WUXGA on shielded BC-DGKat524 cable; 60m (197f t) at SXGA on
shielded BC-DGKat623 cable; 60m (197ft) at SXGA on shielded
BC-DGKat7a23 cable
• Support for up to 1.65Gbps bandwidth
• The passi ng of the EDID and HPD
2
• Support for the DDWG DVI 1.0 standard
signals from the source to the display
device using the cables
Note that on ly the d igital s i gnal (DVI -D) is avail ab le on the DV I connector.
The TP-551HDCP DVI Line Transmitter features:
• A DVI input and a pair of RJ-45 CAT 5 output connectors
• Three status LEDs (INPUT, OUTPUT and POWER)
The TP-552HDCP DVI Line Receiver features:
• A DVI output and a pair of RJ-45 CAT 5 input connectors
• Three status LEDs (INPUT, OUTPUT and POWER)
• EQ. adjustment to enhance performance
3.1 Recommendations for Achieving the Be st Performance
To achieve the best performance:
• Connect only good qualit y connection STP CAT 5e 24AWG or STP
CAT 6 cables, thus avoiding interference, deterioration in signal quality
due to poor matching, and elevated noise-levels (often associa te d with low
quality cables)
• Avoid interference from ne ighboring e l ectri cal a ppl ian ces and pos it i on y our
TP-551HDCP/TP-552HDCP away fr om moist ure, excessi ve sunlight and
dust
1 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 5, CAT 6 and CAT 7a cables may not reach these ranges
2 Hot Plug Detect
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your DVI Line Trans mitt er / Receiver
4
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provide d with this unit
1
.
Warning – Disconne ct power and unplug unit fro m wall
before installing or removing device or servicing unit.
4 Your DVI Line Transmitter / Receiver
This section describes the:
• TP-551HDCP DVI Line Transmitter, see section
4.1
• TP-552HDCP DVI Line Receiver, see section
4.2
4.1 Your TP-551HDCP DVI Line Transmitter
Figure 1 and Table 1 define the TP-551HDCP:
Figure 1: TP-551HDCP DVI Line Transmitter
Table 1: TP-551HDCP DVI Line Transmitter Features
#
Feature
Function
1 5V DC +5V DC connector for powering the unit
2 CAT 5 OUT RJ-45
Connector
B
Connect to the CAT 5 IN B RJ-45 connector on the TP-552HDCP
3 A
Connect to the CAT 5 IN A RJ-45 connector on the TP-552HDCP
4 DVI IN Connector Connect to the DVI source
5 INPUT LED Lights when an input is connected
6 OUTPUT LED Lights when an output is detected
7 POWER LED Lights when receiving power
1 For example, part number 2535-052002
Your DVI Line Trans mitt er / Receiver
5 5
4.2 Your TP-552HDCP DVI Line Receiver
Figure 2 and Table 2 define the TP-552HDCP:
Figure 2: TP-552HDCP DVI Line Receiver
Table 2: TP-552HDCP DVI Line Receiver F eatures
#
Feature
Function
1 5V DC +5V DC connector for powering the unit
2 DVI OUT Connector Connect to the HDMI acceptor
3 CAT 5 IN RJ-45
Connector
B
Connect to the CAT 5 OUT B RJ-45 connector on the TP-551HDCP
4 A
Connect to the CAT 5 OUT A RJ-45 connector on the TP-551HDCP
5 INPUT LED Lights when an input is detected
6 OUTPUT LED Lights when an output is connected
7 EQ. SETUP DIP-switches Adjust the cable compensation equalization level (see section 5.1)
8 POWER LED Li gh ts wh en recei vi ng po w er
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-551HDCP and TP-552HDCP
6
5 Connecting the TP-551HDCP and TP-552HDCP
You can use the TP-551HDCP DVI Lin e Transmitter with the TP-552HDCP
DVI Line Receiver to configure a DVI transmitter/rece iver system.
To connect the TP-551HDCP to the TP-552HDCP, as illustrated in the
example in
Figure 3, do the following:
1. Connect the CAT 5 OUT A and B RJ-45 connectors on the TP-551HDCP to
the CAT 5 IN A and B RJ-45 connectors on the TP-552HDCP, respectively,
via two STP CAT 5e 24AWG cables (s ee s ect i on
5.2).
2. On the TP-552HDCP, connect the DVI OUT connector to an acceptor (for
example, a display).
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity on both
1
Figure 3
the TP-551HDCP and the
TP-552HDCP (not shown in ).
4. On the TP-551HDCP, connect the source (f or exam p le, a computer graphics
source) to the DVI IN connector.
5. On the TP-552HDCP, adjust the equalization level (see section
5.1).
5.1 Adjusting the EQ. Level via the EQ. Setup DIP-switches
To adjust the EQ. level, set the DIP-switches according to the cable length
2
Table 3
, as
defined in :
Table 3: Recommended Equalization Levels DIP-switch Setup
3
Distance [m] DIP 1 DIP 2 DIP 3 DIP 4
Up to 50 OFF OFF ON ON
Up to 40 ON ON ON ON
Up to 30 OFF ON ON ON
1 The TP-551HDCP/TP-552HDCP does not include the Kramer power connect feature
2 The complete list of recommended Kramer cables is on our Web site at http://www.kramerelectronics.com
3 The optimum DIP-switch settings are dependent on the cable type and length, as well as the video resolution and
environment. The table shows the settings for typical installations using Kramer cabling at 1080p. Experimentation may be
necessary in a specific application, and any of 16 possible switch combinations may be applied
Connecting the TP-551HDCP and TP-552HDCP
7 7
Figure 3: Connecting the TP-551HDCP / TP-552HDCP DVI Line Transmitter/Receiver
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-551HDCP and TP-552HDCP
8
5.2 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors
Table 4 and Figure 4 define the STP CAT 5 PINOUT
1
, using a straight pin-to-
pin cable with RJ-45 connectors (note, that t he cable G round shielding must
be connected / soldered to the connector shield):
Figure 4: CAT 5 PINOUT
36
7
812
5
4
1
4
5 7
8
Shield
632
Table 4: CAT 5 PINOUT
EIA /TIA 568A EIA /TIA 568B
PIN
Wire Color
PIN
Wire Color
1 Green / White 1 Orange / White
2 Green 2 Orange
3 Orange / White 3 Green / White
4 Blue 4 Blue
5 Blue / White 5 Blue / White
6 Orange 6 Green
7 Brown / White 7 Brown / White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
1 CAT 6 or similar (heavier gauge) cabling can also be used
Technical Specifications
9 9
6 Technical Specifications
Table 5 includes the technical sp e c ifications
1
Table 5: Technical Specifications of the TP-551HDCP and TP-552HDCP
.
TP-551HDCP TP-552HDCP
INPUTS: 1 DVI
2
2 CAT 5 IN on RJ-45 connectors connector
OUTPUTS: 2 CAT 5 OUT on RJ-45 connectors 1 DVI2 connector
BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel
COMPLIANCE WITH
HDMI STANDARD:
Supports HDMI 1.2 and HDCP
POWER SOURCE: 5V DC, 810mA 5V DC, 620mA
DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H
WEIGHT: 0.3kg. (0.67lb s) ap pro x .
ACCESSORIES: Power supply (5V/2A)
OPTIONS: Kramer DVI cables
3
and BC-DGKat524 (CAT 5 24 AWG), BC-DGKat623 (CAT
6 23 AWG), and BC-DGKat7a23 (CAT 7a 23 A WG) cabl es, RK-3T 19" rack
adapter
1 Specifications are subject to change without notice
2 On a DVI-I connector. Note that only the digital signal (DVI-D) is available on the DVI connector
3 The complete list of Kramer cables is on our Web site at
http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
10
LIMITE D WA RRANTY
WHO IS PROTECTED?
WHA T IS COVERED AND WHA T IS NOT COVERE D
WHA T WE WILL P A Y FOR A ND WHA T W E WILL NOT P A Y FOR
HOW YOU CAN GET WARRANTY SERVICE
LIMITA TION OF IMPLIED WARRANTIES
EXCLUSION OF DAMAGES
CAUTION!
Kramer Electronics (hereafter ) warrants this product free f rom defects in mater ial and workmanship under the
following terms.
Kramer
HOW LONG IS THE W ARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
W e will p ay labor and ma teria l expen ses for cover ed item s. W e wi ll not pa y for th e fol lowing:
The li abil ity of Krame r for any effe ct ive pr oduc ts is l imi ted t o the repair or re pla ceme nt of the pro duc t at ou r op tion. Kram er sha ll
not be liabl e for:
This wa rran ty give s you spe cific l egal rights , and yo u may al so have other r ights, w hich va ry fr om plac e to place.
All produ cts ret urned t o Krame r for service must hav e pri or approv al. This ma y be obt ained f rom you r deal er.
This e quipm ent has b een tes ted to determi ne co mpliance with t he requ ireme nts of:
EN-50 081: "Electro magnet ic com patibi lity ( EMC);
generic emission standard.
Residenti al, co mmerc ial and l ight ind ustry "
EN-50 082: "Electro magnet ic com patibi lity ( EMC) gen eric i mmunity stand ard.
Part 1 : Reside ntia l, comm ercial and lig ht indus try e nviro nment".
CFR-47: FCC* Rules and Regulations:
Part 15 : “Ra d io frequency devices
Subpart B Unintentional radiators”
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
TAMPER E D sti c ke r has be e n to r n,
3. Dama ge, det eriora tion o r malfun ction resul ting fr om:
i) Accident, misuse, abuse, neglect, fire, water , ligh tnin g or othe r acts of natur e
ii) Product m odifi cation , or fai lure to f ollow instru ction s suppli ed wit h the pr oduct
iii) Repair o r att empted repair by anyo ne not au thori zed by Kr amer
iv) Any shipment of the product (clai ms must b e pres ented to the carrier )
v) Removal or inst alla tion of the pro duct
vi) Any other cause, which does not relate to a product defect
vii)Cartons, e quipme nt encl osure s, cabl es or accesso ries use d in c onjunc tion wi th the p roduct
1. Remo val or in stall ations char ges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
respon sibi lity of the Kra mer deal er fr om whom t he produ ct wa s purcha sed.
3. Shippin g char ges.
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
1. Damage to o ther p roperty c aused b y defec ts in th is prod uct, da mages ba sed upo n inco nvenien ce, lo ss of use o f the pro duct, l oss
of time, commercial lo ss; o r:
2. Any othe r d amage s, w het her i nci den tal, co nseq uen tial o r o th erwi se. Some cou ntri es m ay n ot all ow li mit ati ons o n ho w lon g an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limit ation s and exc lusio ns may no t apply to yo u.
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use th e suppl ied DC p ower sup ply t o feed p ower to t he mach ine.
Please use recommended interconnection cables to connect the machine to other components.
IF reattached, removed or otherwise interfered with.
* FCC and CE appro ved usin g STP c able ( for twist ed pai r products )
NOTE:
Part 1 :
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000518 REV 4
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, commen ts and feedba ck .
Caution
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Loading...