Kramer TOOLS TP-122, TOOLS TP-124, TOOLS TP-104, TOOLS TP-104(HD), TOOLS TP-105 User Manual
...
Kramer Electronics, Ltd.
USER MANUAL
Models:
TP-104, TP-104(HD),
XGA Line Transmitter / DA
TP-105, TP-105(HD),
CAT5 Line Driver / DA
TP-121,
XGA / Audio Line Transmitter
TP-122,
XGA / Audio Line Receiver
TP-123,
XGA / Audio / Data Line Transmitter
TP-124,
XGA / Audio / Data Line Receiver
Contents
i
Contents
1
Introduction 1
2
Getting Started 1
2.1
Quick Start 1
3
Overview 4
3.1
About the Power Connect Feature 4
3.2
Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 5
3.3
Recommendations for Achieving the Best Performance 5
4
Your TP-104/TP-104(HD) XGA Line Transmitter / DA 6
5
Your TP-105/TP-105(HD) CAT5 Line Driver / DA 8
6
Your TP-121 / TP-122 9
6.1
Your TP-121 XGA / Audio Line Transmitter 9
6.1.1 The TP-121 Internal Polarity Switches 10
6.2
Your TP-122 XGA / Audio Line Receiver 10
6.2.1 Your TP-122 XGA / Audio Line Receiver (Topside) 10
6.2.2 Your TP-122 XGA / Audio Line Receiver (Underside) 12
7
Your TP-123 / TP-124 13
7.1
Your TP-123 XGA / Audio / Data Line Transmitter 13
7.1.1 The TP-123 Internal Polarity Switches 14
7.2
Your TP-124 XGA / Audio / Data Line Receiver 15
7.2.1 Your TP-124 XGA / Audio / Data Line Receiver (Underside) 16
8
Connecting the XGA / Audio Line Transmitter / Receiver 17
8.1
Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors 19
9
Connecting the XGA / Audio / Data Line Transmitter / Receiver 20
9.1
Controlling via RS-232 (for example, using a PC) 22
10
Configuring a 1:4 XGA to TP Transmitter / Receiver / DA 23
11
Configuring a TP-105 CAT5 Line Driver / DA 25
12
Technical Specifications 27
Figures
Figure 1: TP-104 XGA Line Transmitter / DA 6
Figure 2: TP-104 (Underside Panel) 7
Figure 3: TP-105 CAT5 Line Driver / DA 8
Figure 4: TP-121 XGA / Audio Line Transmitter 9
Figure 5: TP-121 Internal Polarity Switches 10
Figure 6: TP-122 XGA / Audio Line Receiver (Topside) 11
Figure 7: TP-122 XGA / Audio Line Receiver (Underside) 12
Figure 8: TP-123 XGA / Audio / Data Line Transmitter 13
Figure 9: TP-123 Internal Polarity Switches 14
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
Figure 10: TP-124 XGA / Audio / Data Line Receiver (Topside) 15
Figure 11: TP-124 XGA / Audio / Data Line Receiver (Underside) 16
Figure 12: Connecting the XGA / Audio Line Transmitter / Receiver System 18
Figure 13: CAT5 PINOUT 19
Figure 14: Connecting the XGA / Audio / Data Line Transmitter / Receiver System 21
Figure 15: RS-232 PINOUT Connection 22
Figure 16: Configuring a 1:4 XGA to Twisted Pair Transmitter / Receiver / DA 24
Figure 17: Configuring a TP-105 CAT5 Line Driver / DA 26
Tables
Table 1: TP-104 XGA Line Transmitter / DA Features 6
Table 2: TP-104 (Underside Panel) Features 7
Table 3: TP-105 CAT5 Line Driver / DA Features 8
Table 4: TP-121 XGA / Audio Line Transmitter Features 9
Table 5: Features of the TP-121 Internal Polarity Switches 10
Table 6: TP-122 XGA / Audio Line Receiver (Topside) Features 11
Table 7: TP-122 XGA / Audio Line Receiver (Underside) Features 12
Table 8: TP-123 XGA / Audio / Data Line Transmitter Features 14
Table 9: Features of the TP-123 Internal Polarity Switches 14
Table 10: TP-124 XGA / Audio / Data Line Receiver (Topside) Features 16
Table 11: TP-124 XGA / Audio / Data Line Receiver (Underside) Features 16
Table 12: CAT5 PINOUT 19
Table 13: RS-232 PINOUT Connection 22
Table 14: Technical Specifications of the TP-104 and the TP-104(HD) 27
Table 15: Technical Specifications of the TP-105 and the TP-105(HD) 27
Table 16: Technical Specifications of the TP-121 / TP-122 / TP-123 / TP-124 28
Introduction
1
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video, audio
and presentation professional on a daily basis. In recent years, we have redesigned
and upgraded most of our line, making the best even better! Our 500-plus
different models now appear in 8 Groups1, which are clearly defined by function.
Congratulations on purchasing your Kramer TOOLS: TP-104, TP-104(HD)
XGA Line Transmitter / DA, and/or TP-105, TP-105(HD), CAT5 Line Driver
/ DA, and/or TP-121 XGA / Audio Line Transmitter, and/or TP-122 XGA /
Audio Line Receiver, and/or TP-123, XGA / Audio / Data Line Transmitter,
and/or TP-124, XGA / Audio / Data Line Receiver, which are ideal for:
Presentation and multimedia applications
Long range graphics distribution for schools, hospitals, security, and
stores
The package includes one or more of the following Kramer TOOLS:
TP-104/TP-104(HD), TP-105/TP-105(HD), TP-121, TP-122, TP-123,
or TP-124
Power adapter (12V DC Input) and this user manual2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables3
2.1 Quick Start
The quick start charts summarize the basic setup and operation steps of the
TP-121/TP-122 and TP-123/TP-124, and of the TP-104 and TP-105.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
Getting Started
3
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3 Overview
This user manual describes the following Kramer TOOLS:
TP-104/TP-104(HD) XGA Line Transmitter / DA, which is a line
transmitter / 1:4 DA that receives an XGA signal and transmits it over 4
CAT5 cables to appropriate receivers, see section 4
TP-105/TP-105(HD) CAT5 Line Driver / DA, which receives a CAT5
input1, and distributes it to 2 identical outputs, see section 5
TP-121 XGA / Audio Line Transmitter and the TP-122 XGA / Audio Line
Receiver, see section 6
TP-123 XGA / Audio / Data Line Transmitter and the TP-124 XGA /
Audio / Data Line Receiver, see section 7
This section describes:
The power connect feature, see section 3.1
Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see
section 3.2
Recommendations for achieving the best performance, see section 3.3
3.1 About the Power Connect Feature
The Power Connect feature lets you power a transmitter / receiver system by
connecting just one power adapter— to either the transmitter or the receiver.
The other unit is fed via the cable connecting between the transmitter/receiver.
The Power Connect feature applies as long as the cable can carry power. The
distance does not exceed 50 meters on standard CAT5 cable, for longer
distances, heavy gauge cable should be used2.
For a CAT5 cable exceeding a distance of 50 meters, separate power supplies
should be connected to the transmitter and to the receiver simultaneously.
1 Video only
2 CAT5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances
Overview
5
3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
The decision whether to use shielded twisted pair (STP) cable or unshielded
twisted pair (UTP) cable depends on the nature of the application.
It is recommended that in applications with high interference, shielded twisted
pair (STP) cable is used. However, the shield itself does create a capacitance
that degrades the frequency response of the machines. For shorter distances, of
50m or so, shielded twisted pair (STP) cable is preferred because it provides
protection from interference (degradation is not apparent).
For long range applications, unshielded twisted pair (UTP) cable is preferred.
However, the unshielded twisted pair (UTP) cable should be installed far away from
electric cables, motors and so on, which are prone to create electrical interference.
3.3 Recommendations for Achieving the Best Performance
To achieve the best performance:
Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching,
and elevated noise- levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
Kramer TOOLS away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit1.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example: model number AD2512C, part number 2535-000251
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-104/TP-104(HD ) XGA Line Transmitter / DA
6
4 Your TP-104/TP-104(HD1) XGA Line Transmitter / DA
The TP-104 is a line transmitter / 1:4 DA that receives an XGA signal2 and
transmits it over 4 CAT5 cables to appropriate receivers.
In particular, the TP-104:
Has a video bandwidth of more than 150MHz, with a transmission range
of more than 300 ft. (more than 100 meters)
Can power or be powered by the receiver over the same CAT5 cable and
is 12VDC fed
Figure 1 and Table 1 define the TP-104:
1 2 3 4
4
7
7
5
5
6
6
123
Figure 1: TP-104 XGA Line Transmitter / DA
Table 1: TP-104 XGA Line Transmitter / DA Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 OUT 1 RJ-45 Connector
Connects to3 the LINE IN RJ-45 connector on the TP-122 XGA /
Audio Line Receiver or the TP-120 XGA Line Receiver4
3 OUT 2 RJ-45 Connector
Connects to3 the LINE IN RJ-45 connector on the TP-122 XGA /
Audio Line Receiver or the TP-120 XGA Line Receiver4
4 OUT 3 RJ-45 Connector
Connects to3 the LINE IN RJ-45 connector on the TP-122 XGA /
Audio Line Receiver or the TP-120 XGA Line Receiver4
5 OUT 4 RJ-45 Connector
Connects to3 the LINE IN RJ-45 connector on the TP-122 XGA /
Audio Line Receiver or the TP-120 XGA Line Receiver4
6 INPUT HD15F Connector Connect to the XGA source
7 ON LED Illuminates when receiving power
1 The TP-104(HD) (identified by a sticker on its underside) is identical in appearance to the TP-104. However, the
TP-104(HD) can also receive HD signals (high definition resolutions: 480p, 576p, 720p, 1080i and 1080p)
2 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to XGA
3 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 12 and Figure 13)
4 Refer to the separate user manual: PT-110, WP-110, PT-120, TP-120, which can be downloaded at:
http://www.kramerelectronics.com. Also, see the example illustrated in Figure 16
Your TP-104/TP-104(HD ) XGA Line Transmitter / DA
7
Figure 2 and Table 2 define the TP-104 underside panel:
1
2
Figure 2: TP-104 (Underside Panel)
Table 2: TP-104 (Underside Panel) Features
# Feature Function
1 VS Switch Slide the switch up (to NORMAL) to retain the polarity
Slide the switch down1 to change the VS polarity to NEGATIVE polarity2
2 HS Switch Slide the switch up (to NORMAL) to retain the polarity
Slide the switch down1 to change the HS polarity to NEGATIVE polarity2
1 By default, both switches are set to NORMAL
2 Downgoing syncs
Loading...