Page 1
KRAMER
1
2 9 0 0 - 3 0 0 7 4 5 QS
RK-COLLAGE Quick Start Guide
This guide helps you install and use your RK-COLLAGE for the first time. For more detailed information, g
http://www.kramerav.com/manual/RK-COLLAGE to download the latest manual or scan the QR code on the left.
Step 1: Check what’s in the box
RK-COLLAGE 19" 2U Rack Adapter including:
1 Pan bracket (B000283-1)
1 Top bracket (B000285-1)
8
2
3
7 6
1
2 Wing nuts (2703-000022)
1 Faceplate (F000314-1)
3
4
5 6
6 Spring washers (2728-000004)
6 Screws (2701-000138)
5 9
4
o to
Step 2: Assembly and Installation Procedure
1. Place the VIA Collage (1) into the pan bracket (2) with the front of the Via Collage on the
side that screws into the faceplate (5). Make sure all air vents remain open and unblocked.
2. Place the top bracket (3) over the VIA Collage and connect it loosely to the pan bracket
with the 2 wingnuts (4).
3. Place a spring washer (not shown) on each of the 6 screws (6) and lightly screw the pan
bracket to the faceplate (5) with 3 screws on each side.
4. Center the VIA Collage in the faceplate opening and tighten
the 6 screws.
5. Tighten the wingnuts (4) on the top bracket (3).
6. With the power cord facing toward the back, place the VIA
power supply (8) against the open bracket (7) on the side
of the pan.
7. Attach the power supply to the open bracket using 2 cable
ties (not included, shown at right).
8. Screw the final assembly into a 19" 2U rack using the holes
on the outside of the faceplate (9).
RK-COLLAGE Quick Start (P/N: 2900-300745QS REV 1)
2
P/N:
Rev:
WWW.KRAMERAV.COM
Loading...