Page 1
RC-2
Wall Plate – RS-232 Controller
The RC-2 is a 2-button
controller that sends a series
of RS-232 commands with
the push of a button. It
operates serial devices such
as projectors, displays &
switchers.
Page 2
RC-2
2 Back Lit & Label Capable Buttons.
1 RS-232 Port - Controls a device via serial
control protocols.
Optional Ports - Add control ports with the PL-
18 Control Port Expander.
Memory - Each button can be programmed
with up to four macro sequences.
Dimensions - 7.9cm x 1.59cm x 12.4cm (3.12"
x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm
(3.39" x 0.63" x 3.39") and 8cm x 1.59cm x
8cm (3.15" x 0.63" x 3.15") EU W, D, H.
Wall Plate Size - 1 gang EU/US.
FEATURES
TECHNICAL SPECIFICATIONS
PORTS:
1 RS-232 on a terminal block
connector.
POWER
SOURCE:
12V DC, 40mA.
DIMENSIONS:
7.9cm x 1.59cm x 12.4cm (3.12" x
0.63" x 4.88") US; 8.6cm x
1.59cm x 8.6cm (3.39" x 0.63" x
3.39") and 8cm x 1.59cm x 8cm
(3.15" x 0.63" x 3.15") EU W, D, H.
WEIGHT:
0.3kg (0.67lbs) approx.
ACCESSORIES:
Kramer's Windows®-based
configuration software, power
supply.
OPTIONS:
RS-232 9-pin D-sub port to 3-pin
terminal block connector cable.
Loading...