Kramer PT-571HDCP User Manual

PT-571HDCP

DVI over Twisted Pair Transmitter

The

PT

-571HDCP is a

twisted-pair transmitter for
DVI signals. The PT-

571HDCP converts the DVI to

twisted pair signal and the
PT

-572HDCP converts the
twisted pair signal back to a
DVI signal.

PT-571HDCP

Max. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP Compliant.
System Range - Up to 90m (295ft) at SXGA, or

up to 30m (98ft) at UXGA on shielded BC­DGKat524 cable.
Up to 90m (295ft) at SXGA, or up to 70m
(230ft) at UXGA on shielded BC-DGKat623
cable.
Up to 100m (330ft) at SXGA, or up to 80m
(265ft) at UXGA on shielded BC-DGKat723
cable.

Cable - Requires shielded twisted pair (STP)

cable. For optimum range and performance
use, use Kramer's BC-DGKat524, BC­DGKat623 and BC-DGKat723 cables. Note
that the transmission range depends on the
signal resolution, graphics card and display
used. The distance using non-Kramer CAT 5,
CAT 6, and CAT 7 cables may not reach these
ranges. Use only shielded cable where both
ends of the shield are soldered to ground.

EDID PassThru - Passes EDID/HDCP

signals from source to display.

Power Connect™ System - A single

connection to the transmitter powers both
units when the devices are within 150ft (50m)
of each other.

Ultra-Compact PicoTOOLS™ - 4 units can be

rack mounted side-by-side in a 1U rack space
with the optional RK-4PT rack adapter.

FEATURES

TECHNICAL SPECIFICATIONS

INPUTS:

1 DVI, 1.2Vpp on a DVI Molex 24­pin female connector.

OUTPUTS:

1 CAT 5 OUT on an RJ-45
connector.

BANDWIDTH:

Supports up to 1.65Gbps.

POWER
SOURCE:

12V DC, 250mA (transmitter and
receiver together).

DIMENSIONS:

6.2cm x 5.2cm x 2.4cm (2.4" x

2.1" x 1") W, D, H.

WEIGHT:

0.14kg (0.3lbs).

ACCESSORIES:

Power supply, mounting bracket.

OPTIONS:

RK-4PT 19” rack adapter,
Kramer DVI cables and BC­DGKat524 (CAT 5 24AWG) and
BC-DGKat623 (CAT 6 23AWG)
cables.