Kramer PT-571 User Manual
PT-571
HDMI over Twisted Pair Transmitter
The PT-571 is a twisted pair
transmitter for HDMI signals.
The PT-571 converts an
HDMI signal to a single
twisted pair signal and the
PT
-572 converts the twisted
pair signal back to an HDMI
signal.
PT-571
Max. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP Compliant.
HDMI Support - HDMI (V.1.4 with Deep Color,
x.v.Color™, Lip Sync, HDMI Uncompressed
Audio Channels, Dolby TrueHD, DTS-HD).
3D Pass-Through.
System Range - Up to 90m (295ft) at 1080i, or
up to 30m (98ft) at 1080p on shielded BCDGKat524 cable. Up to 90m (295ft) at 1080i,
or up to 70m (230ft) at 1080p on shielded BCDGKat623 cable. Up to 100m (330ft) at 1080i
or up to 90m (295ft) at 1080p on shielded BCDGKat723 cable.
Cable - Requires shielded twisted pair (STP)
cable. For optimum range and performance
use, use Kramer's BC-DGKat524, BCDGKat623 and BC-DGKat723 cables. Note
that the transmission range depends on the
signal resolution, graphics card and display
used. The distance using non-Kramer CAT 5,
CAT 6, and CAT 7 cables may not reach these
ranges. Use only shielded cable where both
ends of the shield are soldered to ground.
EDID PassThru - Passes EDID/HDCP
signals from source to display.
Status LED - Lights red when receiving power
only, orange when output and power are
attached, and yellow when both an active
input and output are attached.
Power Connect™ System - A single
connection to the transmitter powers the
receiver.
Ultra-Compact Pico TOOLS™ - 4 units can be
rack mounted side-by-side in a 1U rack space
with the optional RK-4PT rack adapter.
FEATURES
TECHNICAL SPECIFICATIONS
INPUTS:
1 HDMI connector.
OUTPUTS:
1 RJ-45 connector.
BANDWIDTH:
Supports up to 1.65Gbps
bandwidth per graphic
channel.
COMPLIANCE WITH
HDMI STANDARD:
Supports HDMI 1.3 and
HDCP.
POWER SOURCE:
12V DC, 250mA
(transmitter and receiver
together).
DIMENSIONS:
6.2cm x 5.2cm x 2.4cm
(2.4" x 2.1" x 1") W, D, H.
WEIGHT:
0.14kg (0.3lbs).
ACCESSORIES:
Power supply.
OPTIONS:
RK-4PT 19” rack adapter.
Loading...