PT-2C Quick Start Guide
2 9 0 0 - 3 0 0 4 9 4 QS
3
This guide helps you install and use your PT-2C for the first time. For more detailed information, go to
http://www.kramerav.com/manual/PT-2C to download the latest manual or scan the QR code) and check if firmware
upgrades are available.
Step 1: Check what’s in the box
PT-2C Extended EDID Processor
4 Rubber feet
1 Power adapter (5V DC) 1 Quick Start Guide
Step 2: Install the PT-2C
To mount the PT-2C in a rack, use an RK-4PT rack adapter . Alternatively, the device and place it on
a table.
You can use the TOOL bracket Installation kit (supplied) to mount the PT-2C on a desk top, wall or similar area. Fasten a bracket
on each side of the TOOL using the two M3x8 screws (supplied). Use the flat-head screws (supplied) to fix the TOOL to the
mounting surface or enable it to slide in place.
attach the four rubber feet to
Step 3: Connect the input and output
Always switch off the power to each device before connecting it to your .
For best results, always use Kramer high-performance cables to connect your AV equipment to the .
Laptop
USB
PC
PT-2C
PT-2C
Range Extender Tx
Step 4: Connect the power
Connect the 5V DC power adapter to the and plug the adapter into the mains electricity.PT-2C
Step 4: Set PROGRAM DIP-switches
OFF
ON
1 2 3 4 5 6 7 8
PT-2C Quick Start (P/N: 2900-300494QS REV 3)
P/N:
Rev:
WWW.KRAMERAV.COM
Loading...