Kramer PT-2C User Manual
USER MANUAL
MODEL:
PT‑2C
Extended EDID Processor
P/N: 2900-300494 Rev 3
www.kramerAV.com
Kramer Electronics Ltd.
PT‑2C – Contents
i
Contents
Introduction 1
Getting Started 1
Overview 2
Overview 3
Defining the PT‑2C Extended EDID Processor 4
Connecting the PT‑2C 5
Configuring the PT‑2C 6
EDID loading/storing 7
Default EDID 8
Technical Specifications 11
Supported Resolutions 12
Kramer Electronics Ltd.
PT‑2C – Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we
have redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
• Review the contents of this user manual.
Go to www.kramerav.com/downloads/VP-734 to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
Achieving the Best Performance
• Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
• Do not secure the cables in tight bundles or roll the slack into tight coils.
• Avoid interference from neighboring electrical appliances that may adversely influence
signal quality.
• Position your Kramer PT‑2C away from moisture, excessive sunlight and dust.
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
Safety Instructions
Caution: There are no operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics power supply that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall before installing
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
Kramer Electronics Ltd.
PT‑2C – Introduction
2
arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular
country go to our recycling pages at www.kramerav.com/support/recycling.
Overview
Congratulations on purchasing your Kramer PT‑2C Extended EDID Processor. This
product, which incorporates HDMI™ technology, is ideal for:
• Legacy infrastructures that require advanced feature support
• Troubleshooting aid for installers on legacy infrastructures
• Education, entertainment corporate and government
Kramer Electronics Ltd.
PT‑2C – Overview
3
Overview
The PT‑2C is an EDID processor for HDMI signals. It allows you to pass or block HDCP,
deep audio or deep color signals that may or may not be compatible with the display.
The PT‑2C features:
• A maximum data rate of 10.2Gbps (3.4Gbps per data channel)
• 4K resolution support
• Compliance with HDMI and HDCP standards
• CEC and ARC support
• HDMI input and output connectors
• Signal reclocking
• Active video signal source detection
• LED indication for input, output and power as well as successful EDID capture
• Configurable timeout for when the input signal is lost
• Restore DDC clock rate on display side
• Program DIP-switches that control the desired functions
• Mini USB for EDID Designer and FW update support
• +5V DC Power supply
• The ultra-compact PicoTools case that allows four units to be mounted side-by-side in a
1U rack space with the optional RK-4PT 19” rack adapter
Loading...