Page 1
Installation Instructions
MODELS:
KWC-MUSB Receiver for Micro-USB Connector
KWC-LTN
Receiver for Lightning Connector
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our Web site where
updates to these install ation i nstructions may be found.
We welcome your questions, comments, and feedback.
www.kramerAV.com
info@kramerel.com
P/N:
2900-300620
Rev:
5
Page 2
KWC-MUSB Receiver for Micro-USB Connector and KWC-LTN Receiver for
Lightning Connector
Congratulations on purchasing your Kramer KWC-MUSB and KWC-LTN wireless charging
receivers. You can us e the receivers with the Kramer Wireless Charging (KWC) products.
These receivers are used for mobile devices that DO NOT have a builtin wireless charging r ec eiv er.
Mobile devices with a built-in wireless rece iv er, compliant with the Qi
standard, can be placed directly on the charging spot.
The KWC-MUSB Receiver for Micro-USB Connector (see Figure 1) and KWC-LTN
Receiver for Lightning Connector (see Figure 2) are wireless power receivers that utilize
electromagnetic induction to charge mobile devices wirelessly and are compatible with the
Qi standard for wireless charger s.
Figure 1: KWC-MUSB Receiver for
Micro-USB Connector
Figure 2: KWC-LTN Receiver for
Lightning Connector
Figure 3: Receiver Underside
Using the Wireless Charger
To use the Kramer receivers:
1. Connect your mobile device to either the KWC-MUSB Receiver for Micro-USB
Connector or the KWC-LTN Receiver for Lightning Connector, as required.
2. Place the mobile device with the attached receiver centered on the charging spot
(correct side facing the charging spot, see Figure 3
) until it’s fully charged.
You can only charge one mobile device via the charging spot at a time.
When charging a mobile device, do not place any metal or magnetic
objects over the receiver.
Charging a mobile device using the receiver in the vicinity of pacemakers,
hearing aids, or similar medical el ectronic devices may interfere with the
function of these devices.
Make sure the receivers are used in a cool and well-ventilated
environment and away from flammable and explosive objects.
Avoid using the receivers in extreme temperatures or high humidity.
Page 3
Specifications
PORT:
KWC-MUSB: micro USB receiver
KWC-LTN
: lightning receiver
LED INDICATORS:
ON (blue)
CHARGING EFFICIENCY:
70%
POWER CONSUMPTION:
5V DC, 700 mA Max
STANDARD:
Qi V1.1
SAFETY REGULATORY COMPLIANCE:
CE, FCC
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90 %, RHL non-condensing
DIMENSIONS:
3.7cm x 5cm x 0.85cm (17.2” x 7.2” x 1.7”) W, D, H
WEIGHT:
Net: 0.012kg (0.03lb)
Gross: 0.032kg (0.07lb)
COLORS:
KWC-MUSB: light blue
KWC-LTN: light green
Specifications are subject to change without notice at www.kramerav.com
Page 4
Loading...