Kramer KWC-1 Users Manual

P/N: 2900-300504 Rev 9 www.kramerAV.com

USER MANUAL

MODEL:

KWC-1
Wireless Charging Spot

Kramer Electronics Ltd.

KWC-1 – Contents

i

Contents

Introduction 1

Getting Started 1
Overview 2

Defining KWC-1 3

Power Cord Options 4

Installing KWC-1 5

Drilling a Hole in the Table 5
Mounting KWC-1 in the Table 5
Connecting Cables 6

Using KWC-1 7

Using Wireless Charger Directly 7
Using Wireless Charger with Receiver 8

Technical Specifications 9

Kramer Electronics Ltd.

KWC-1 – Introduction

1

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!

Getting Started

We recommend that you:

• Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.

• Review the contents of this user manual.

Go to www.kramerav.com/downloads/KWC-1 to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).

Achieving the Best Performance

To achieve the best performance:

• Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).

• Do not secure the cables in tight bundles or roll the slack into tight coils.

• Avoid interference from neighboring electrical appliances that may adversely influence

signal quality.

• Position your Kramer KWC-1 away from moisture, excessive sunlight and dust.

Safety Instructions

Caution:

• This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.

• For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.

• There are no operator serviceable parts inside the unit.

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any

Kramer Electronics Ltd.

KWC-1 – Introduction

2

costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular
country go to our recycling pages at www.kramerav.com/support/recycling/.

Overview

Thank you for purchasing the Kramer KWC-1 Wireless Charging Spot, which is ideal for
boardrooms, conference and training rooms or any place where wireless charging is required!

KWC-1 (Kramer Wireless Charging) is a built-in table mounted Qi standard compliant

charging spot that enables you to charge your mobile device by simply placing it on the
charging spot.

If your mobile device does not support wireless charging, you can connect it to a Kramer
wireless charging receiver (sold separately) and then place it on the charging spot.

KWC-1 features a black or clear anodized sandblast finish.