Page 1
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
HDC19412 Rev. 1.0
Models:
FV11D-M - Secure 1-Port DVI-I Video Isolator
FV11H-M - Secure 1-Port HDMI Video Isolator
FV11P-M - Secure 1-Port DisplayPort Video Isolator
FI11D-M - Secure 1-Port DVI-I KVM Isolator
FI11H-M - Secure 1-Port HDMI KVM Isolator
FI11P-M - Secure 1-Port DisplayPort KVM Isolator
Secure Isolators | QUICK SETUP GUIDE
Secure Isolators
Page 2
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
TABLE OF CONTENTS
2
Introduction
3
HSL Secure Isolators
3
Installation
4
Connecting the Isolators
4
Operation
7
Running an EDID Capture
7
Page 3
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
INTRODUCTION
HSL Secure Isolators
The secure Isolator prevents vulnerable peripherals
from mediating between compromised and secure
computers by ensuring that video and audio flow in a
single direction.
3
Page 4
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
INSTALLATION
Connecting the Isolator
Step 1 - Connect the PC to the Isolator’s PC SIDE:
1. Audio connection: For all models, connect the PC to the
Isolator’s AUDIO IN port, using a 1/8" (3.5mm) stereo
plug.
2. Video connection: For all models, connect the PC to the
Isolator’s VIDEO IN port, using the corresponding video
cable (VGA/HDMI/DVI/DP).
3. PC keyboard and mouse connection: For FI11D-M,
FI11H-M, and FI11P-M models, connect the PC to the
Isolator using a USB A to USB B cable. Connect the USB
A end to the PC and the USB B end to the Isolator’s
COMP/MOUSE port.
4
Power
LED
EDID
LED
Page 5
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
INSTALLATION
Step 2 - Connect the peripherals to the Isolator’s
CONSOLE SIDE:
1. Audio connection: For all models, connect the speakers
to the Isolator’s AUDIO OUT port.
2. Video connection: For all models, connect the
monitor/projector cable to the Isolator’s VIDEO OUT
port.
3. PC keyboard and mouse connection: For FI11D-M,
FI11H-M, and FI11P-M models, connect a USB mouse
and keyboard, to the Isolator’s corresponding MOUSE
and KB ports.
Both mouse and keyboard LEDs should light
continuously.
5
Keyboard
LED
Mouse
LED
Note: If either LED remains OFF, the Isolator does not recognize the
device; use an alternative device.
Page 6
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
INSTALLATION
Step 3 - Power ON the Isolator
1. For all models, connect the power adapter to the
Isolator’s PC SIDE, DC IN port.
Power ON the Isolator by plugging it into an AC
wall outlet.
2. The PC SIDE Power LED should light continuously.
If not, check the connections.
Step 4 - Make sure the PC and display are
powered ON
6
Page 7
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
OPERATION
Running an EDID Capture
Before using the Isolator, run a one-time EDID capture. This
prevents the continuous transfer of potentially malicious data from the display to the PC – that could infect the PC, cause data
leakage, and so on.
Preparation:
• Connect the PC and all peripherals to the unit, according to
the diagram.
• Make sure the PC, display, and unit are ON.
To run an EDID capture:
1. On the PC SIDE, short-click the CAPTURE button – for less
than one second. Warning: Long-clicking the CAPTURE
button sends the unit into an undesired loop. If this
happens, restart the unit and repeat the procedure.
At first, the EDID LED flickers for a few seconds and then
lights continuously.
Note: If the EDID LED is OFF, check the connections and
that the display is powered ON. Then, repeat the
procedure.
2. Restart the unit.
7
Note: An EDID capture needs to be performed for new installations and
when changing a display.
Page 8
HSL Secure 2-Port KVM Combiner Quick Setup Guide
Table of Contents
SECTIONS
1
2
3
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL). All other marks are the property of
their respective owners. Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSL
Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell anything that it may
describe. Reproduction, disclosure, or use without specific authorization from HSL Corporation is strictly prohibited.
Highseclabs.com
Loading...