USER MANUAL
MODEL:
DS Vision® 3000
CAT 5 Range Extender System
P/N: 2900-300282 Rev 1
DS Vision® 3000 – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 System Overview 4
3.2 Transmitter and Broadcaster 5
3.3 Receivers 6
3.4 Receiver DCL 7
3.5 Line Splitter Long 8
3.6 LEDs 8
4 Connecting the DS Vision® 3000 9
4.1 Broadcaster/Transmitter Connections 10
4.2 Receiver/Receiver L Connections 10
4.3 Receiver DCL Connections 10
4.4 Connecting CATx Cables 10
4.5 Connecting to the Power Supply 11
4.6 Adjusting the Picture Quality 11
4.7 Note on Serial Extension: 11
5 Technical Specifications 12
Figures
UFigure 1: DS Vision 3000 System OverviewU 5
UFigure 2: Broadcaster Unit - 8 PortsU 6
UFigure 3: Receiver PortsU 6
UFigure 4: Receiver DCL Front and Back ConnectionsU 7
UFigure 5: Line Splitter LongU 8
UFigure 6: Connection DiagramU 9
DS Vision® 3000 - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer DS Vision® 3000, which is ideal for
the following typical applications:
• Digital signage
• Media distribution
2 DS Vision® 3000 - Getting Started
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
• Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
• Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
• Position your Kramer DS Vision® 3000 away from moisture, excessive
sunlight and dust
• For best performance the spec of the cable should be:
Gauge: 24AWG (should be written on the cable)
Wire: solid wire (should be written on the cable)
• For cable runs over 100m (330ft) the SKEW delay of the cable should be no
more than 20ns per 100m (330ft) (should be written in the spec of the cable)
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!
DS Vision® 3000 - Getting Started 3
2.2 Safety Instructions
Caution: There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at
http://www.kramerelectronics.com/support/recycling/.
!
Loading...