P/N:
2900-300551
Rev:
1
Installation Instructions
MODELS:
DIP-20BP
DIP-30BP
Black Replacement Front Panels
for use with the TBUS-10XL
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our Web site where
updates to this user manual may be found.
We welcome your questions, comments, and feedback.
www.kramerAV.com
info@kramerel.com
Congratulations on purchasing your Kramer DIP-20BP / DIP-30BP black replacement front panel
which is used to replace the gray front panel so it can blend into the T10-22M inner frame of the
TBUS-10XL. Included with the DIP-20BP or DIP-30BP front panel is an Allen L-shaped key.
To replace the front panel of the DIP-20BP or DIP-30BP:
1. Remove the two front panel screws on the
DIP-20 or DIP-30 with the Allen L-shaped key (supplied).
2. Remove all the hexagonal spacers using a 5mm socket spanner wrench (not supplied).
3. Remove the original front panel and replace with the new DIP-20BP or DIP-30BP black front
panel.
4. Replace the hexagonal spacers and tighten with the socket spanner wrench.
5. Replace the two front panel screws and tighten with the Allen L-shaped key.
Loading...