CLS-AOCH / CP-AOCH Fiber Optic HDMI Cable
Kramer CLS-AOCH / CP-AOCH Fiber Optic HDMI cables are designed to
take +5V DC power from the source devices to the HDMI pin #18 of the
SOURCE side connector on the cable.
Optical fiber cable is not robust physically compared to conventional copper
cable materials. Even if this cable is designed to be seamlessly resistant at
certain levels of artificial strengths to the cable, CLS-AOCH / CP-AOCH can
be damaged if it is excessively pinched, twisted or kinked when being installed
and after being installed. Be careful not to bend or twist the cable tightly.
When CLS-AOCH / CP-AOCH is installed into the conduit, the fiber pulling
strength and the bending radius are the key conditions to safe installation of
the cable:
Fiber bending radius: 6mm
Fiber pulling/tensile strength: 50kg (500N)
Crush Resistance: 50kg (500N)
Do not disassemble or modify the products, especially the HDMI connector
head parts. Do not remove the dust plug before the cable laying process is
completed. HDMI connector heads are very critical parts. Remove the head at
the last moment just before the connector is plugged into the source or the
display devices after the installation is complete.
i
Congratulations on purchasing your Kramer CLS-AOCH / CP-AOCH Plug and Play active
Fiber Optic HDMI Cable. The CLS-AOCH / CP-AOCH provides an extremely high quality
signal over a wide range of resolutions, up to 4K@30Hz. This cable is available at lengths of
33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60m), 230ft
(70m), 262ft (80m), 295ft (90m) and 328ft (100m).
The CLS-AOCH / CP-AOCH is ideal for long distance transmission in professional AV
systems, indoor and outdoor digital signage and kiosks, home theater systems, surgical
theaters, facility automation systems and whenever high resolution video and audio is
required.
Features
The CLS-AOCH / CP-AOCH:
Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color
Supports Multi-channel audio, Dolby True HD, dts-hd Master Audio
Is HDMI compliant: EDID, CEC, HDCP
Provides protection from electromagnetic interference (EMI) and radio frequency
interference (RFI)
Has built-in powering with low power consumption
CLS-AOCH / CP-AOCH Plug and Play Installation
Before installing the cable, make sure that you have an HDMI graphic card or devices with an
HDMI port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal
source devices).
Cable Dimensions
Has high pulling strength
The CLS-AOCH / CP-AOCH includes four optical fibers and six AWG 28 wires with compact
size HDMI connectors. The cable has a SOURCE end to which the source is connected (for
example, a DVD, Blu-ray or game console box) and a DISPLAY end to which the acceptor is
connected (for example, a projector, an LCD display or a tablet device), see Figure 1
Figure 1: HDMI Connectors – SOURCE and DISPLAY (with Dimensions)
To install the CLS-AOCH / CP-AOCH:
1. Unpack the cable from the package with care and remove the cable tie.
We recommend that you save the original box and packaging materials for possible
future shipment.
2. Install the cable (for example, an in-wall or conduit installation or under-floor
installations).
3. Once the cable installation is complete, remove the dust cap and plug the SOURCE
connector head of the cable into the source devices.
Do not plug the SOURCE connector to the display device.
4. Remove the dust cap and plug the DISPLAY connector head of the cable into the
display devices.
Do not plug the DISPLAY connector to the source device.
5. Switch on the power of source and display devices.
Troubleshooting
Note that it is important to connect the cable correctly as marked on the
end of each connector: SOURCE to the source side and DISPLAY to the
acceptor side.
Audio and Power
VIDEO RESOLUTION:
1080p Full HD Deep Color 48bit, 3D. 4K@30Hz
EMBEDDED AUDIO SUPPORT:
PCM 8ch, Dolby Digital True HD, DTS-HD Master
Audio
HDMI COMPLIANCE:
HDCP, EDID, CEC
PIXEL CLOCK RATE:
300MHz
DDC SIGNAL INPUT:
5.0V
Cable Assembly
HDMI CONNECTOR:
Male HDMI Type A Connector
HDMI CONNECTOR DIMENSIONS:
7.07cm x 1.96cm x 1.12cm (2.78" x 0.8" x 0.44")
W, D, H
CABLE STRUCTURE:
Hybrid Optical Fiber Cable
CABLE JACKET MATERIAL:
UL Plenum (CMP-OF) and LSZH (Low Smoke
Zero Halogen)
CABLE DIAMETER:
3.4mm
CABLE BENDING RADIUS:
6mm
MAX. PULLING STRENGTH:
500N (50kg, 110lbs)
MAX. COMPRESSION LOAD
RESISTANCE:
500N (50kg, 110lbs)
Power
POWER SUPPLY HDMI:
PIN # 18 (draws current from the source)
POWER CONSUMPTION:
0.25W
General
OPERATING TEMPERATURE:
0° to +50°C (32° to 122°F)
STORAGE TEMPERATURE:
-30° to +70°C (-22° to 158°F)
OPERATING HUMIDITY:
5% to 85%, RHL non-condensing
AVAILABLE SIZE:
33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft
(40m),164ft (50m), 197ft (60m), 230ft (70m), 262ft
(80m), 295ft (90m) and 328ft (100m)
WEIGHT:
1.46kg (3.22lbs) approx.
KR A ME R EL E CT RON I CS LTD .
Installation
Instructions
MODELS:
CLS-AOCH (Low Smoke Version)
CP-AOCH (Plenum Version)
Fiber Optic HDMI Cables
For the latest information on our products and a list of Kramer
distributors, visit our Web site where updates to these installation
instructions may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
P/N: 29 00 -30044 2 Rev 3
P/N:
2900-300442
Rev:
3
i
!
If you have encountered a problem, check that:
The source and display devices are both switched on
Both HDMI connector heads are fully plugged into the devices
The cable or its jacket are not physically damaged
The cable is not bent or kinked
Specifications
Loading...