Kramer C-GM/3RVM-3 Specifications

Kramer’s computer graphics video to component video breakout cables are constructed of 3 mini coax cables with a 15-pin HD (M) connector on one end and 3 RCA (M or F) connectors on the other. These cables can be used when a source or display can be configured to send or receive either computer graphics video or component video signals - for example, Kramer VP-723DS and VP­724DS scalers use this adapter to support their HDTV output modes.
High Quality Construction - Rugged and high resolution 3 mini coax cable with molded connectors. Numerous Applications - Allow Kramer 15-pin HD distribution amplifiers, switchers and scaler switchers to be used to route component video signals. Varied Selection of Lengths - Male 15-pin HD to female RCA’s version available in 1 ft length. Male 15-pin HD to male RCA’s version available in 3 or 6 foot lengths. High Quality Construction - Rugged and high resolution 3 mini coax cable with molded connectors. Numerous Applications - Allow Kramer 15-pin HD distribution amplifiers, switchers and scaler switchers to be used to route component video signals. Varied Selection of Lengths - Male 15-pin HD to female RCA’s version available in 1 ft length (0.3 meters). Male 15-pin HD to male RCA’s version available in 3 or 6 foot lengths (0.9 or 1.8 meter).
CABLE ASSEMBLIES
C-GM/3RVM & C-GM/3RVF SERIES
CONFIGURATIONS
MODEL
DESCRIPTION
FEET
Male - Female
C-
GM/3RVF
Molded VGA
– 3 RCA
0.8'
Male - Male
C-
GM/3RVM
-3
Molded VGA
– 3 RCA
3' C-GM/3RVM
-6
Molded VGA
– 3 RCA
6'
Loading...