Kramer Electronics, Ltd.
USER MANUAL
Model:
C-FODPM/FODPM
Optical DisplayPort Extension Cable
Contents
i
Contents
1 Introduction 1
2 Getting Starte d 1
2.1 Quick Start 2
3 Overview 2
3.1 About DisplayPort 3
3.2 About HDCP 4
4 Your C-FODPM/FODPM Optical DisplayPort Extension Cable 4
5 Using the C-FODPM/FODPM Optical DP Extension Cable 5
5.1 Connecting the C-FODPM/FODPM Optical DP Extension Cable 5
5.2 Avoiding Pitfalls using the C-FODPM/FODPM Cable 6
6 Technical Specifications 7
Figures
Figure 1: C-FODPM/FODPM Optical DP Extension Cable 4
Figure 2: Connecting the C-FODPM/FODPM Optical DP Extension Cable 6
Tables
Table 1: Technical Specifications of the C-FODPM/FODPM 7
Introduction
1 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of uni que, creat iv e, an d aff ordabl e solutions to the vast range
of problems that confr ont th e video, audio, presentation , and broadca s ting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making th e best ev en be tter! Our 1, 000-plus diffe rent models
now appear in 11 grou ps
1
Congratulations on purchasing your Kramer C-FODPM/FODPM Optical
DisplayPort (DP) Extension Cable, which is ideal for:
that are clearly defined by function.
• Digital flat panel and plas ma displays, for medical, commercial and travel
applications
• Conference rooms and auditoriums
• Kiosks with digital flat panel displays for presenting information
• LED signboards in streets and stadiums
The C-FODPM/FODPM package includes the following items:
• An Optical DisplayPort Extension Cable
2
• One Power adapter (5V DC Input) and this user manual
and two DisplayPort copper
cables
3
2 Getting Started
We recommend that you:
• Unpack t he equip ment carefully and s ave the original box and packaging
materials for possible fut ure shipment
• Review the contents of this user manual
• Use Kramer high performance high resolution cables
4
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Syste ms; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Roo m Connectivity; GROUP 10: Accessories
and Rack Adapters; GROUP 11: Sierra Products
2 Available in lengths of 10m, 30m, 50m
and
100m (32.8 to 328ft).
3 Download up-to-date Kramer user manuals from the Internet at
http://www.kramerelectronics.com
4 The complete list of Kramer cables is on our Web site at
http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
3 Overview
The Kramer C-FODPM/FODPM Optical DisplayPort Extension Cable is a
hybrid cable with four multi-mode fiber cables for the DP interface including
embedded copper wires to support the auxiliary channel, Hot Plug Detect and
a power mana ge me nt advanced solution that is designed to extend DisplayPort
over hybrid (fiber + copper) cable up to 100 meters.
The C-FODPM/FODPM extension cable:
• Supports resolutions of up to WQXGA (2560x1600) at 60Hz vertical
refresh rate or 2.7Gbps bandwidth per lane (total data rate is 10.8Gbps)
• Is fire retardant PVC, e mploying 4-fiber strands and 5 shielded copper
wires
• Lets you extend DisplayPort up to 328 feet (100 meters) for WQXGA
(2560x1600) at a 60Hz refresh rate
Overview
3 3
• Complies with VESA’s EDID (extended-display-identification) and
MCCS (monitor-control-command-set) standards
• Easily allows dire c t c onnection to the HDTV source and display
peripheral devices
• Supports DP 1.1 with 36 bit color depth, and DVI 1.0 (DDC2B), fully
implemented by fiber-optic c ommunication
• Complies with the limits for a Class A digital device, pursuant to part 15
and 2 of FCC and CE
• Does not require any special memory size, CPU speed and chipsets, when
using a computer
• Provides data security with negligible RFI/EMI emissio ns
• Is HDCP compliant and HDTV compatible
• Passes EDID / HDCP signal s from source to display (EDID Pa ssThru)
3.1 About DisplayPort
DisplayPort (DP) is a digital disp lay interface standard for the PC industry. It
delivers the high est resolu tions and sound quality.
In addition, DisplayPort:
• Provides a simple interface between a PC and a display, projector or TV
• Supports 1 to 4 data pairs ("lanes") at a transfer rate of 1.62Gb or 2.7Gb
per second
• Has a maximum length of 15 meters for video transmissio n, at a
resolution of 1080p/60Hz and 3 meters for full bandwidth transmission
• Video specs include a video path that supports 6 to 16 bits per color
channel, a maximum resolution of 2560x1600 pixels and a total maximum
bandwidth of 10.8Gbps over four lanes
• Is backward-compatible with HDMI, DVI (Digital Visual Interface) and
VGA, via an appropriate adapter
• Version 1.1 supports HDCP (see section
3.2 )
• Supports two-way communication over it s auxiliary channel between the
video source (for example, a PC) and the digital displa y, enabling new
functio nality such as automatic c onfiguration and o ne-button play
• Replaces the interface needed between the PC and an external display, as
well as the low voltage dif fere ntial signaling (LVDS) interface in
notebook computers, monitors, to connect to LCD panels
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your C-FODPM/FODPM Optical DisplayPort Extension Cable
4
3.2 About HDCP
The High -B a ndwidth Digital Conte nt Protection (HDCP) standard
1
To achieve the best performance:
protects
digital video and audio signals transmitted over DVI or H D M I connections
between two H DCP-enabled devices to eliminate the reproduction of
copyrighted material. To protect copyright holders (such as movie studios)
from having their programs copied and shared, the HDCP standard provides
for the secure and encrypted transmission of digital signals.
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal q uality due to poor matching, and elevated noiselevels (often associated with low quality cables)
• Position your Kramer C-FODPM/FODPM away from moisture, excessive
sunlight and dust
4 Your C-FODPM/FODPM Optical DisplayPort Extension Cable
Figure 1 illustrates the C-FODPM/FODPM Optical Disp layPort Extension
Cable extension sys te m:
Figure 1: C-FODPM/FODPM Optical DP Extension Cable
1 Developed by Intel
Using the C-FODPM/FODPM Optical DP Extension Cable
5 5
5 Using the C-FODPM/FODPM Optical DP Extension Cable
This section describes how to:
• Connect the C-FODPM/FODPM Optical DP Extension Cable (see
Section
5.1)
• Avoid pitfalls when using the C-FODPM/FODPM (see Section
5.2)
5.1 Connecting the C-FODPM/FODPM Optical DP Extension Cable
To connect the C-FODPM/FODPM Optical DisplayPort Extension Cable, as
the examp le in
Figure 2 illustrates, do the following:
1. Connect the Display port Copper cables to each side of the
C-FODPM/FODPM cable.
2. Plug the transmitter DisplayPort connector
5F
1
directly6F2 to the DisplayPort
connector of the source (for example, a computer graphics source).
3. Connect t he C-FODPM/FODPM transmitter side
7F
3
to the 5V DC power
adapter and connect the adapter to the mains electricity.
4. Plug the receiver DisplayPort connector
8F
4
directly2 to the DisplayPort
connector of the acceptor (for example, a display).
5. Turn ON the Power on the computer and on the display device.
1 Of the copper DisplayPort cable connected to the transmitter
2 Using an intermediate cable or adapter may deteriorate the signal transmission performance
3 On the Computer graphics source side
4 Of the copper DisplayPort connector connected to the receiver
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the C-FODPM/FODPM Optical DP Extension Cable
6
Figure 2: Connec ting the C-FODPM/FODPM Optical DP Extension Cable
5.2 Avoiding Pitfalls using the C-FODPM/FODPM Cable
If the display device shows only a black screen:
• Make sure that all the AC and DC plugs and jacks used by the external
power supplies are firmly connected
• Be sure that the DP ports are firmly plugged into the computer and the
display device, and be sure that the Transmitter and Receiver modules are
correctly plugged into the computer and display device, respectively
• Check if the computer and display are powered ON and properly booted
• Reset the system by unplugging and then replugging the Transmitter DP
port or Receiver DP port and then reboot the system
If the screen is distorted or displays noise, disconnect and reconnect the optical
cables.
Be sure that at all times the cables are stored and used away from liquid or dirt
Technical Specifications
7 7
6 Technical Specifications
Table 1 includes the technical specifications:
Table 1: Technical Specifications
1
INPUT:
of the C-FODPM/FODPM
DisplayPort In
OUTPUT: DisplayPort Out
BANDWIDTH: 2.7Gbps per lane (10.8Gbps total); up to WQXGA @60Hz
COMPLIANCE WITH DP
STANDARD
Supports DP 1.1 with 36-bit color depth and DVI 1.0 (DDC2B), fully
implemented by fiber optic communication
EXTE NSIO N LIMIT: 100m (330feet) for WQXGA (2560x1600) @60Hz refresh rate
HYBRID FIBER-OPTIC CABLE: Flam e ret ar da nt PVC em pl o ying four fiber strands and five shielded
copper wires
TENSILE LOAD: 180N
MINIMUM BEND RADIUS: 15.4cm
OUTER DIAMETER OF CABLE: 7.2cm
OPERATING TEMPERATURE: 0°C to 50°C
STORAGE TEMPERATURE: -10°C to 85°C
HUMIDITY: 5% to 85%
POWER SOURCE: AC 100-240V, 50/60Hz 0.1A, +5 V, 1.0A SMPS DC-power Adapter
Core is 5V and outer is GND
DIMENSIONS: 3.5cm x 9.9cm x 1.6cm (1.38" x 3.9" x 0.63") W, D, H
WEIGHT: 0.14kg (0.31lbs) approx.
ACCESSORIES: Pow er supply
1 Specifications are subject to change without notice
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
LIMITE D WARRAN TY
WHO IS PROTECTED?
WHA T IS COVERED AND WHA T I S NOT COVERED
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
HOW YOU CAN GET WARRANTY SERVICE
LIMITA TION OF IMPLIED W ARRANTIES
EXCLUSION OF DAMAGES
CAUTION!
Kramer Electronics (hereafter ) warrants this product free from defects in material and wor kma nship unde r the
following terms.
Kramer
HOW LONG IS THE W ARRANTY
Labor and parts are warranted for one year from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
W e will p ay labor and ma teria l expen ses for cover ed item s. W e wi ll not pa y for th e fol lowing:
The li abil ity of Krame r for any effe ct ive pr oduc ts is l imi ted t o the repair or re pla ceme nt of the pro duc t at ou r op tion. Kram er sha ll
not be liabl e for:
This wa rran ty give s you spec ific l egal rights , and yo u may al so have other r ights, w hich va ry fr om place to place.
All produ cts ret urned t o Krame r for service must hav e pri or approv al. This ma y be obt ained f rom you r deal er.
This e quipm ent has b een tes ted to determi ne co mpliance with t he requ ireme nts of:
EN-50 081: "Elec troma gnetic c ompat ibility (EMC) ;
generic emission standard.
Reside ntia l, comm ercial a nd lig ht indus try"
EN-50 082: "Elec troma gnetic c ompat ibility (EMC) generi c immuni ty st andar d.
Part 1 : Reside ntia l, comm ercial and lig ht indus try e nviro nment".
CFR-47: FCC* Rules and Regulations:
Part 15 : “Ra d io f r equency devices
Subpart B Unintentional radiators”
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
TAMPER E D sti c ke r ha s be e n to r n,
3. Damag e, det eriorat ion o r malfun ction resulti ng fr om:
i) Accident, misuse, abuse, neglect, fire, water, lightn ing or other a cts of na ture
ii) Produc t modi ficati on, or fa ilur e to foll ow instr ucti ons sup plied w ith the produ ct
iii) Repair o r att empted repair by anyo ne not au thori zed by Kr amer
iv) Any shipment of the product (clai ms must b e pres ented to the carrier )
v) Remova l or i nstalla tion of the pro duct
vi) Any other cause, which does not relate to a product defect
vii)Cartons, e quipme nt encl osure s, cabl es or accesso ries use d in c onjunc tion wi th the p roduct
1. Rem oval or inst allatio ns char ges .
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
respon sibi lity of the Kra mer deal er fr om whom t he produ ct wa s purcha sed.
3. Shipping c harge s.
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
1. Damage to o ther pr operty c aused b y defect s in th is prod uct, dam ages ba sed upo n inconve nien ce, loss of use o f the pro duct, l oss
of time, commercial lo ss; o r:
2. Any other da mage s, w het her i nci den tal, co nseque nti al o r o the rwi se. Some c oun tri es ma y n ot a llow li mita tion s o n ho w lon g a n
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limit ation s and exc lusio ns may no t apply to yo u.
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use th e suppl ied DC p ower sup ply t o feed p ower to t he mach ine.
Please use recommended interconnection cables to connect the machine to other components.
IF reattached, removed or otherwise interfered with.
* FCC and CE app roved usi ng STP cable ( for twi sted pa ir produ cts)
NOTE:
Part 1 :
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel. com
P/N: 2900-000651 REV 2
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, commen ts and feedba ck .
Caution
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Loading...