KP Electronic Systems KPMTUWE1ML Users Manual

Installation manual

The MTWE is designed for inside / outside installations for all non pit applications.

MTWE is a long range radio Meter Transmission Unit (MTU). The MTU interrogates the

encoder register at a preprogrammed interval to obtain the most recent read, and

transmits the data to the base station receiver. Single- port and dual-port encoder type

MTUs are available.

Required tools and materials

• Wire stripping tool.

• Screwdriver – small standard head for terminal connections.

• Power drill and bit (¼”).

• 1¼ “sheet metal / wood screws.

• FTU101

• FTU100WMP

Wall mount – Installation Process

• Place the mounting bracket on intended installation location.

• Mark the location to pre drill the holes.

• Remove the bracket from the wall and use a ¼” drill bit to pre drills the holes.

• Place the bracket on the wall and align it with the holes.

• Mount the bracket to the wall using two 1¼” screws.

Figure -Error! No text of specified style in document.1: Wall Mount Installation Process

Pipe Mount – Installation Process

• Place the mounting bracket on the intended installation location.

• Fasten the mounting bracket on the pipe using two screws and the “omega”

bracket (see figure).

• Slide the MTU on the mounting bracket until the four clips lock the unit in place.

Figure -2: Pipe Mount Installation Process