KP Electronic Systems FTS100 User Manual

e

FTS100

Field Test Unit

TM

FTS100 (Field Test Set) - This Unique and sophisticated

portable device is designed to test and calibrate equipment

such as:

Radio Receivers

Decoder boards of RCI / DTRCI, SMR

Signal Strength Measurement boards of Repeaters and EXR5000.

Light, inexpensive and simple to operate, the FTS100 offers a great

alternative to the functions otherwise offered by the heavy

and expansive Spectrum analyzer which was previously required in ord

to calibrate the radio equipment. Using the FTS100 allows the technici

system and service personal to get the best performance out

of the KP radio network.

FTS100 has 4 operational modes:

RF signal (modulation frequency 900 Hz)

Checks and Tunes the signal level indicator of the receiver

Duty Cycle

Adjusts the decoder

Address Increment

Sends Different Addresses and event codes in order to check

general system functionality

Minimum Detectable Signal (MDS). Checks sensitivity of receiver

reception level

Specifications

7.5 cm
(3)

17 cm , (6.7)

3 cm

(1.2)

www.kpsystems.com

Input Voltage

Current Consumption 120 mA at 9V

Internal Battery

Frequency

RF Output

Source Impedance

Frequency Modulation

Deviation

Operating Temp

Storage Temp

Housing

Weight

Size

8-15 VDC

Standard 9V

VHF

136-174 MHz

UHF

403-512 MHz

RF 4 button fix -100dbm, -106 dbm,

-112dbm, -116dbm

50 Ohms

Internal Modulation Source

12.5 kHz

o

F to +122oF (0oC to 50oC)

32

o

4

F to +158oF (-20oC to 70oC)

Metal Box

300 gr

17 cm x 7.5 cm x 3 cm (6.7 x 3 x 1.2)

Low: 136-155 High: 155-174

BROCH.033 Rev. New

Head Office: Tefen Industrial zone, 24959, Israel. Tel: [phone], Fax: [phone], [e-mail]

US Office: 109 Tudor Drive, North Wales, PA 19454 USA. Tel: [phone], Fax: [phone], [e-mail]