KP Electronic Systems BSRU100 User Manual

TM

TM

BSR100

/ BSRU100

The General Purpose Radio Transceiver

for Telemetry Applications

The BSR100 and BSRU100 are long-range radio transceivers used
for either general purpose or specialized telemetry applications.
Designed for VHF and UHF narrow band frequencies, these
10-watt synthesized units act as an interface between the radio
frequency and data signal.
Equipped with modern circuitry, the BSR100 and BSRU100
can be a perfect point-to-point and multi-point RF
module, capable of handling data rates of up to 20 Kbytes
per second, in narrow band applications.

Important Features

VHF and UHF models

Wide operating temperature
range

Fully programmable by PC

12 VDC operation

Low standby current

Front panel diagnostics and
control

Up to 10 Kbytes per second ­on narrow bandwidth frequencies

Convenient 15 Pin D type
interface connector

Compact

Robust construction

Very reliable

TM

BSR100

installed inside EXR5000TM Transciever unit

BSR100TM installed inside SMR5000TM Repeater unit

169mm (6.6)

44mm
(1.7)

www.kpsystems.com

Specifications

Models BSR100

TM

VHF BSRU100

General

Power Supply

Channel Spacing

Size

Weight

Frequency

Operating Temperature

Storage Temperature

Control Connector Rear panel: 15 Pin D type with: PTT, CM Audio In, Audio Out,

DC input 10-15 VDC, 140mA standby, 3A max during
transmission

12.5KHz; 25KHz

169x150x44mm (6.6x5.9x1.7)

0.65 Kg (1.44 Lbs)

VHF

136-155 MHz [P.N BSR100L]
155-174 MHz [P.N BSR100H]

synthesized in sub bands UHF

410-430 MHz [P.N BSRU100L1]
430-450 MHz [P.N BSRU100L]
450-470 MHz [P.N BSRU100M]
470-490 MHz [P.N BSRU100H]
490-510 MHz [P.N BSRU100H1]

-30oC to 60oC (-54oF to 108oF)

-40oC to 80oC (-72oF to 144oF)

Data In data Out and Programming.
Front panel: 10 Pin Header for Control and Programming

RF Transmitter

Modulation

Frequency Stability
Spurious Emission

Modulation Acceptance
Bandwidth

RF Output Impedance

Max Deviation 5.5 KHZ
Power Out

10 kbytes per sec on 12.5KHz channel and 20 kbytes per second

50W BNC connector, single or seperate connector for receive

+

2.5ppm @ -30oC to 60oC (23oF to 140oF)

-

FM, FSK and DFM

-70dBc

on 25KHz channel

and transmit

+

10 Watt Nominal@ 12.5 VDC

-

RF Receiver

Sensitivity

Selectivity

Image Rejection

Data/Audio In Impedance

Data/Audio Out Impedance

Programming

Channel Switching

Using PC utility program GUP10TM via 10 pin front panel connector

ON THE FLY via 15-pin rear panel connector with 20msec settling time

0.25 mV, -117dBm [12db sinad]

60dB for 12.5KHz, 70dB for 25KHz

65dB min

>100KW

1KW

TM

UHF

150mm (5.9)

Head Office: P.O. Box 42, Tefen Industrial Zone, Tefen, 24959, Israel. Tel: [phone], Fax: [phone], [e-mail]

US Office: 109 Tudor Drive, North Wales, PA 19454.USA, Tel: [phone], Fax: [phone], [e-mail]