InstructionDisclaimer
Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer’s instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at customerservice@denniskirk.com
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.
or
INsT R U C T I O N
Thank you for purchasing our Koso EX-02 Speedometer. Before operating the unit, please read the instruction thoroughly and keep it for future
reference.
Notice
The meter requires DC 12V power only.
1. .
2. For installation, please follow the steps described below. Any damage caused by a wrong installation shall be imputed to the users.
3. To avoid short circuits, do not pull the wires off the connector wh
4. Do not disassemble or change any parts.
5. Repair and maintenance should be executed by our professionals only.
MARK MEANING:
Some procedures m ust be followed to avoid damage caused by a wrong installation.
WARNING!
CAUTION!
Accessories
1-1
Meter X1
1
1" 25.4mm Rubber X1( ) 1 1/8" 28.6mm Rubber X1( )
M4 x 12 Screw X1
9
Some procedures must be followed to avoid injuries.
Some procedures m ust be followed to avoid any damage to the vehicle.
Meter plate X1
2
M5 x 18 內 六角螺絲 支X1
65
M5 x 18 Screw X1
10
en installing the unit
3
7
11
. Do not break or modify the wire terminal.
Handlebar bracket X1
1 1/4" 32 mm Rubber X1( )
M5 Washer X2
4
118
12
PRESS THE
BUTTON ONCE
7/8" 22.2mm Rubber X1( )
M4 x 10 S crew X2
3 mm Allen key X1
PRESS THE
BUTTON 3
SECONDS
Wiring installation instruction
2-1
Meter Accessory 1( )
Remove the waterproof plug before
connecting the optional external button.
Installation instruction
2-2
4
7
Mid-way connector Accessory 20( )
Red / Postive pole (Connect to the
battery )DC 12V
Black / Ground wire to connect to
the vehicle body or the engine
(must be a good ground)
External button (Optional accessory 1)
Follow this procedure for proper installation
5
5
6
6
2
3
1
1.Rubber Accessory 4 5 6 7
2.Handlebar bracket Accessor y 3
3 M5 x 18 Screw Accessor y 10
. ( )
4.Meter plate Accessory 2
5.M4 x 10 Screw Accessory 8
6.M5 Washer X2 Accessory 11
7.Meter Accessor y 1
8.M4 x 12 Screw Accessory 9
( 、 、 、 )
( )
Adjust the meter to the proper viewing angle before
tightening the Allen screw.
( )
( )
( )
X2
( )
( )
4 mm Allen key X1
13
Please contact your local distributor if the items received are not the same as the above-listed ones.
Optional accessory
1-2
Extern al b ut to n
2
Some optional accessories may not be sold in your area. For more details, please contact your local distributor.
Mid- way connector X2
14
8
wh 485b a0 4a -P1
Basic function instruction
2-2
Speedometer
Display range: 0~360km/h 0~225 MPH .
●
Display unit: km/h MPH).
●
Odometer
Display range: 0~99,999 km mile ,
●
automatically resets after 99,999 km mile .
Display unit: 1 km mile .
●
Trip meter
Display range: 0~9999.9 km mile ,
●
automatically resets after 9999.9 km mile .
Display unit: 0.1 km mile .
●
Select button
Press the Select button on the main screen to switch between
●
12 24 hour mode, speedometer record, stopwatch , and
、
MAX record.
Function specications
2-3
2
●Speedometer
○Display internal
○Odometer
○Trip meter A.B
● Hour meter
○Hour meter A.B
Design and sp ecifications are subject to change without notice!
Battery replacement
2-4
CR20 32
(
( )
( )
( )
( )
( )
( )
( )
Display range : 0~360 km/h (0~225 MPH)
Display unit 1 km/h & MPH for alternative：
<0.5 second
Display range : 0~99,999 km (mile)
automatically resets after 99,999km (mile)
Display unit : 1
Display range : 0~9999.9 km (mile)
automatically resets after 0~9999.9 km (mile)
Display unit : 0.1 km (mile)
Display range 0~99,999 hour：
Display unit 0.1 hour：
Display range 0~9999.9 hour： ,
automatically resets after 9999.9 hours
Display unit 0.1 hour：
Setting range 12 24 hours： 、
Setting unit 1 ： minute
Display range DC 8~18 V ：
Display unit 0.1V：
km (
mile)
2
Figure A
PU
ck: 12 24 MODE
●
Clo
Volt
●
Stopwatch function:
●
can be either programmed for manual
activation or by wheel activation
MAX Record function
● ：
Average speed 0~360 km/h 0~225 MPH
MAX Speed 0~360 km/h 0~225 MPH
MAX voltage
●Inner battery display range: 4 levels.
Adjust Button
Press the Adjust button on the main screen to switch between ODO, TripA B,
● 、
Total Hour meter, Hour meter A B.
●Inner Battery Level Display range 4 levels：
●Effective temperature range
●Meter standard
●Meter size
●Meter weight
Follow this procedure for proper installation.
1
●●The meter includes an internal battery (CR2032). This batte ry shall be
replaced only when power ru ns out.
SH
In order to install the battery properly, push the battery as show on figure (A)
to make sure the battery is placed underneath the metal tab (1).
WARNING!
、
Display range 0'00''00~9'59''99：
Display unit 0.01 sec.：
Setting range 300~5,000 km
automatically resets after 5,000 km
Setting unit 1 km ：
Average speed 0~360 km/h 0~225MPH： ( )
MAX Speed 0~360 km/h 0~225 MPH： ( )
MAX voltage ：DC 8~18 V
JIS D 0203 S2
120 X 40 X 23 mm
+/- 127g
Not following this procedure could result in permanent
damage to the meter.
、
meter:
DC 8~18 V
：
-10~+60 C
： ( )
： ( )
：
DC 8~18 V
o
Switch function instructions
3
● Instructions for select button
●Press the while on main
screen to switch from Clock to
Stopwatch.
●
Press and hold the for Select button
3 seconds to alternate 12/24hour
modes.
then the AM/PM symbol will not be
displayed.
●Press the to switch from
Stopwatch to Volt meter.
resetting the stopwatch is chosen,
press Select button and hold for 6sec.
to switch to Voltmeter.
Press and hold the for 3
●
seconds to reset the Stopwatch.
then press the to start
counting and press
again to stop.
press the external button (optional) to
start counting and press again
to stop.
●Press the to switch
from Voltage to Speed Record.
CAUTION
Stopwatch to Speed Record, you
must have a record for the Stopwatch
(please do not reset the Stopwatch).
When Stopwatch is resetted, pressing
the Select/External button will start the
Stopwatch function again.
●Press the to switch
from o c meter.
Select button
If 24hour mode is chosen,
Select button
When the option for manually
Select button
If the button setting is "ON",
Select button
Select button
If button setting is "OFF", then
Select button
To switch from
Select button
Speed record t lock
● Instructions for adjust button
●While on main screen, press the
adjust button
function from odometer to trip A .
●While on odometer screen, press and
hold the for 3
seconds to change the speed unit.
●Press the to switch
from trip A to trip B.
●Press and hold the for
3 seconds to reset the trip A.
●Press the to switch from
trip B to total hour meter.
●Press and hold the for 3
seconds to reset the trip B.
●Press the to switch from
total hour meter to hour meter A.
●Press the to switch from
hour meter A to hour meter
Press the to exit from
●
Hour Meter B and to go back to
odometer screen.
●Back to the odometer screen.
once to switch the
Adjust button
Adjust button
Adjust button
Adjust button
Adjust button
Adjust button
Adjust button
B.
Adjust Button
Press and hold the for 3
●
seconds to reset the
Symb ol i s ON , pl ea se r es et u nd er
this funct io n sc reen.
●Back to clock screen.
Select button
Speed Record
Wh en M ai nt en an ce
Wh 48 5b a0 4a -P2
Setting Mode
4
●While on main screen, press the
Adjust+Select
3 sec. to enter the tire
circumference and sensing point
settings (for setting a different tire
size.)
●Use the to set the
proper tire circumference.
●4-1 The tire circumference and sensing point setting
●●EX. The tire circumfere nce is 1300
mm.
the digit you want to set.
The tire circumference setting range
is from 300 to 2500 mm.
Use the valve stem
as the star ting point and the
terminal point to measure
the wheel circumference
with a measuring tape.
●●EX. The tire circumference setting is
changed from 1000 mm to 1300
mm.
the setting.
Adjust button
Press the to move to
Press the to change
Adjust button
Default setting : 1000mm
Select button
●From switch to screen.
●4-4 The clock ( ) setting minute
●●EX. To change the setting to 14:05.
Press the to choose
the minute to be set.
●●EX. The time is now changed
to 14:05.
Press to go back to
Clock setting screen.
●From switch to screen.
●Press the again to enter
the Stopwatch Setup
●4-5 Sto pwatch Setup
cm
130
●
Press to choose between
Auto mode (Stopwatch starts/stops
according to the wheel rotation) and
Manual mode (Stopwatch starts/stops
by pressing the meter button of the
optional thumb switch).
●
If AUTO option is chosen, press
to exit the Stopwatch
Adjust button
setup
Select Button
Setting range: 0~59 minutes.
Adjust button
Select button
Adjust button
Default value: AUTO
●4-7 Backlight brightness
●Press the to enter the
Backlight Brightness setting
●●EX. To change the Backlight
brightness setting to 1.
Press the to adjust
the brightness of the backlight
●●EX. The Backlight brightness setting is
changed from 5 to 1
Press the to confirm and
exit the backlight Brightness setting
●From switch to screen.
● Press the to enter the
ODO setting.
Adjust button
Select button
Ad justab le Range: 1 ~ 5
De fa ult value: 5
Adjust button
Adjust button
●4-9 ODO setting.
● Press the again to view
the actual meter mileage under TOTAL.
●●Ex. To set the customized mileage
adjustment under USER.
Press the to switch
from Total ODO to User ODO setting.
●●EX. To change the ODO setting
of 5000 km.
Press the to enter the
desired ODO value to be set.
●●EX. The User ODO to be set is
3000 km.
Press the to move the
cursor to the digit to be set.
●Press the to choose
the digit to be set.
●Press the to go back to
the ODO viewing display
●Then press and hold both the
Adjust and Select buttons
and go back to the main screen.
Adjust button
Select Button
Adjust button
Adjust button
Setting range 00000~
99999 km.
Setting unit 1 mm.
Default value: 0
Select button
Adjust button
：
：
3 sec. to exit
●4-2 Sensing point setting
●4-3 The clock (Hour) setting
●Press the three
times to enter the sensing point setting.
●●EX. To change the sensing point
to 6.
Press the to move to
the digit you want to set.
range from 1 to 60 points.
●EX. the sensing point setting has been
changed from 1 to 6.
●Press the to choose
the hour you want to set.
●Press to go back to tire
circumferences value & sensing point
setting screen.
●From switch to screen.
●Press the to enter the
clock (Hour) setting
●●EX: The hours have to be set to 14.
Press the to choose
the hour you want to set.
Adjust button
Select button
The sensing point settings
Default value: 1
Select button
Adjust button
Select button
Select button
●4-6 Maintenance Oil Light Setting
● If Manual mode "SW" (switch) option
is chosen, press
to enter the menu then
to switch between "ON" (external
button - optional) or “OFF" (meter
button).
Default value: OFF
●Press the to enter the
ODO setting.
●From switch to screen.
●Press the to enter the
Maintenance Oil Light Setting.
●●Ex. Select ON/OFF to enable/disable
the maintenance oil light function.
If OFF is selected, the n press the
once to exit the
Adjust button
maintenance mileage setting.
Default value: OFF
●●If ON is chosen, press
to enter the maintenance oil light setting
Press the to move the
cursor to the digit to be set.
Adjust button
Select button
Adjust button
Adjust button
Adjust button
Adjust button
●Back to the main screen.
Troubleshooting
5
The following situations do not necessarily indicate a malfunction to the meter. Please check the following before taking it in for repair.
Problem
The meter doesn't work
when the power is on.
The meter shows wrong
information
Speed does not ap pear
or appear incorrectly.
If the problem can still not be solved according to the steps above, please conta ct your local distributor to get assitance. ※
Diagnosis
●
The power is not supplied properly to the
meter.
→
Make sure the wiring is connected
correctly. The wiring and fuse may
be broken.
→
The battery is too old to supply enough
power to
●Check the battery voltage and make sure
that it supplies enough power.
●
Make sure that the speed sensor is
connected properly.
●
Check the tire-size setting.
refer to man ual 4-1.→
make the meter work.
Problem
Clock is incorrect
Battery power lower
than level 1.
Diagnosis
●→Check if the wire is connected properly
Check if the positive wire (Red) is
connected to the battery and the main
switch positive wire (Brown) is connected
to the main switch.
●→The problem may be caused by
insufficient power.
Replacement of the internal battery
may be necessary.
Setting range: 0~24 H.
●●EX. The hours have now been
changed from 0:00 to 14:00.
Press the to enter the
minute setting.
Adjust button
● If OFF is chosen, then press the
button
oil light setting.
to exit the maintenance
Adjust
Wh 48 5b a0 4a -P4wh 485b a0 4a -P3
Loading...