Korenix JetBox 5630 User Manual

JetBox 5630

HW User Manual

www.korenix.com

0.0.1

2

Overview | Korenix

Copyright Notice

Reproduction without permission is prohibited.

Information provided in this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for any infringements upon the

rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change without

notice. While reasonable efforts have been made in the preparation of this document to assure

its accuracy, Korenix assumes no liabilities resulting from errors or omissions in this document,

or from the use of the information contained herein.

Korenix reserves the right to make changes in the product design without notice to its users.

Acknowledgments

Korenix is a registered trademark of Korenix Technology Co., Ltd.

All other trademarks or registered marks in the manual belong to their respective

manufacturers.

Table of Content

Copyright Notice .................................................................................................................... 2

Acknowledgments .................................................................................................................. 2

Table of Content .................................................................................................................... 3

Chapter 1 Overview ........................................................................................................................ 4

Chapter 2 Hardware Specification .................................................................................................. 5

Chapter 3 Hardware Feature .......................................................................................................... 7

3-1 Mechanical Outline ........................................................................................................ 7

3-2 Front Panel ..................................................................................................................... 9

3-3 Bottom View ................................................................................................................ 10

3-4 Wiring the Power Inputs .............................................................................................. 10

3-5 Grounding JetBox ......................................................................................................... 10

3-6 I/O Connectors ............................................................................................................. 11

3-6-1 Ethernet (RJ-45) ................................................................................................... 11

3-6-2 SFP ........................................................................................................................ 11

3-6-3 USB 2.0 (HOST) ..................................................................................................... 11

3-6-4 RS232/422/485 (DB9) .......................................................................................... 12

3-6-5 Console ................................................................................................................. 12

3-6-6 Reset Button ........................................................................................................ 12

3-6-7 SD Card Slot .......................................................................................................... 12

3-7 JetBox 5633Gf-w USB Holder ....................................................................................... 13

3-8 System Login ................................................................................................................ 15

Chapter 4 Customer Service ......................................................................................................... 15

4

Overview | Korenix

Chapter 1 Overview

One of the advantages of adopting Korenix JetBox series industrial computers is ready-to-use. All

these years, Korenix is devoted to enhance usability and functions of embedded computers in

industrial domain. Korenix operating system provides device drivers, protocol stacks, system

utilities, supporting services and daemons to make system integration simple. Besides, Korenix also

provides application development toolkits for users to build their own applications easily.

The stylish compact JetBox 5630Gf-w series are industrial layer 3 VPN routers with Linux computing

capability. It is a gateway to connect different network groups such as Ethernet and serial control in

a complex networking architecture and manage peripherals at the front-end site. With Gigabit

Ethernet, fiber connection and ability of network redundancy, JetBox 5630Gf-w series can be

applied in crossroads or highway for flow control and traffic monitoring of remote transportation

control. Besides, JetBox 5630Gf-w series are designed with features of compact, reliable and robust

to adopt in various industrial vertical markets with hazardous environment such as transportation,

surveillance and environmental monitoring.

Korenix | Hardware Specification

5

Chapter 2 Hardware Specification

JetBox 5630Gf-w

JetBox 5633Gf-w

Interface

Ethernet Switch

LAN

10/100/1000 Base-TX RJ-45 x3

Built‐in 15KV ESD protection of all signals

10/100/1000 Base-TX RJ-45 x3

Built‐in 15KV ESD protection of all signals

WAN

100/1000 Mbps SFP fiber/

10/100/1000 Base-TX RJ45 combo x1

100/1000 Mbps SFP fiber/

10/100/1000 Base-TX RJ45 combo x1

RS232/422/485

x1 (DB9), default RS232, RS485 support

4-wire only

x1 (DB9), default RS232, RS485 support

4-wire only

USB 2.0 (Host)

x1, Supporting devices: USB ﬂash,

wireless dongle

x3, Supporting devices: USB ﬂash,

wireless dongle

SD card slot

x1

Wireless

--

USB x2 for 3G/Wifi/GPRS dongle

expansion

System

Processor

TI AM3352 720MHz ARM Cortex-A8

System memory

512MB DDR2 SDRAM

System flash

256MB, up to 100MB free space for

customized program storage

256MB, up to 100MB free space for

customized program storage

Console

3-pin header (RS232 interface)

LED per RJ45 port

(on the port)

 Ethernet Port: Link (Green on) /

Activity (Green blinking)

 Ethernet Speed: 1000Mbps (Amber

on) / 10 or 100Mbps (Amber off)

 Ethernet Port: Link (Green on) /

Activity (Green blinking)

 Ethernet Speed: 1000Mbps (Amber

on) / 10 or 100Mbps (Amber off)

LED per unit

 Power Status, System: On (Green on)  2 x Status for Customization (Green

or Amber)

 Fiber Status: 1000Mbps (Green on) /

100Mbps (Amber on)

 Power Status, System: On (Green on)  2 x Status for Customization (Green

or Amber)

 Fiber Status: 1000Mbps (Green on) /

100Mbps (Amber on)

RTC

Battery backup external RTC

Battery

Ultra-Capacitor (DIP type)

Watchdog timer

Embedded hardware watchdog timer to

auto reset system when system failure

Embedded hardware watchdog timer to

auto reset system when system failure

Power on/off

switch

x1

6

Hardware Specification | Korenix

Reset button

x1, reboot: 3 seconds/reset default: 7

seconds

x1, reboot: 3 seconds/reset default: 7

seconds

DC input

DC 9~36V power input with polarity auto

reverse protection

DC 9~36V power input with polarity auto

reverse protection

Power

consumption

10W

18W

ME

Housing IP rating

IP30 Sheet Metal

Color

Silver

Dimension (mm)

160(H) x 118(D) x 47(W)

160(H) x 118(D) x 80(W)

Net weight

0.9kg

1.2kg

Mounting

DIN-rail

Operating temp.

-40 ~ 75°C, 0 ~ 95% RH 

Storage temp.

-40 ~ 80°C, 0 ~ 95% RH 

OS support

Embedded Linux

JetOS56 (kernel 3.2)

Certificate

EMI

CISPR 16-1-2/ 16-2-1/ 16-2-3 / 22, FCC

Part 15 Subpart B Class A, ANSI C63.4

Heavy Industrial IEC/EN61000-6-4

CISPR 16-1-2/ 16-2-1/ 16-2-3 / 22, FCC

Part 15 Subpart B Class A, ANSI C63.4

Heavy Industrial IEC/EN61000-6-4

EMS

Heavy Industrial IEC/EN 61000-6-2, IEC

61000-4-2, IEC 61000-4-3, IEC 61000-4-4,

IEC 61000-4-5, IEC 61000-4-6, IEC

61000-4-8, IEC 61000-4-9

Heavy Industrial IEC/EN 61000-6-2, IEC

61000-4-2, IEC 61000-4-3, IEC 61000-4-4,

IEC 61000-4-5, IEC 61000-4-6, IEC

61000-4-8, IEC 61000-4-9

Shock

IEC60068-2-27

Bump

IEC60068-2-29

Vibration

IEC60068-2-64

Free Fall

IEC60068-2-32

Railway EMC

EN50121-1/-4 (Compliance)

Warranty

5 years

Korenix | Hardware Feature

7

Chapter 3 Hardware Feature

3-1 Mechanical Outline

JetBox 5630Gf-w appearance

JetBox 5630Gf-w mechanical outline

(160 x 47 x 118 mm)

8

Hardware Feature | Korenix

JetBox 5633Gf-w appearance

JetBox 5633Gf-w mechanical outline

(160 x 118 x 80 mm)

Korenix | Hardware Feature

9

3-2 Front Panel

The front panel includes 3 x 10/100/100 RJ-45 LAN ports, 1 x Gigabit RJ-45/SFP combo WAN port, 1

x RS232/422/485, USB 2.0 sockets and diagnostic LEDs.

JetBox 5630Gf-w

JetBox 5633Gf-w

LED: PWR, S1, S2, SFP

Gigabit RJ45 LAN x3

USB2.0

RS232/422/485

2-pin terminal block

Combo WAN x1:

100/1000 SFP

10/100/1000 RJ45

IP30 Steel Metal Design

Compact Size

Combo WAN x1

Gigabit RJ45 LAN x3

USB2.0

RS232/422/485

2-pin terminal block

Mechanical holder for

USB dongle

USB2.0 x2

10

Hardware Feature | Korenix

3-3 Bottom View

The bottom side of the JetBox 5630Gf-w series is shown below.

3-4 Wiring the Power Inputs

JetBox 5630Gf-w series accepts 9~36V DC power input.

1. Insert the positive and negative wires of your DC supply into the V+ and V- contacts of the

terminal block connector. The recommended working voltage is DC24V (DC9~36V).

2. Tighten the terminal screws to prevent the DC wires from loosening.

Signal Name 1 VCC

2

GND

3-5 Grounding JetBox

There is one grounding screw on the bottom side, and please connect the frame grounding of

system to the grounding surface to ensure safety and prevent noise to interfere communication.

Power On/off Switch

Terminal Block

Reset Button

Console Port

Earth Grounding Screw

Korenix | Hardware Feature

11

3-6 I/O Connectors

3-6-1 Ethernet (RJ-45)

JetBox 5630 series provide three RJ-45 LAN ports and one RJ-45/SFP combo WAN port. The RJ-45 is

standard RJ‐45 jack socket.

1 8

Signal Name

1

MDX0+

2

MDX0-

3

MDX1+

4

MDX2+

5

MDX2-

6

MDX1-

7

MDX3+

8

MDX3-

3-6-2 SFP

JetBox 5630 series provide one RJ-45/SFP combo WAN port. Please don’t connect Ethernet RJ-45

and SFP transceiver at the same time or use wrong SFP spec which does not match with SFP speed

setting, or exception conditions would happen. (Default speed: Gigabit)

To change SFP speed you need to reboot the system to make it effective.

3-6-3 USB 2.0 (HOST)

USB type “A” female connectors for USB peripherals.

Signal Name

1

VCC

2

DATA-

3

DATA+

4

GND

12

Hardware Feature | Korenix

3-6-4 RS232/422/485 (DB9)

JetBox 5630 series provide one serial port (DB9). (Default: RS232, RS485 support 4-wire only)

1 5

6 9

RS-232

RS-422

RS-485

(4-wire)

1

DCD

RXD-

2

RXD

RXD+

3

TXD

TXD+

4

DTR

TXD-

5

GND

6

DSR

7

RTS 8 CTS 9 RI

3-6-5 Console

JetBox provides one 3‐pin connector Console port for debug use.

1 3

Signal Name

1

TXD

2

RXD

3

GND

3-6-6 Reset Button

This button is used to make the system reboot or reset to the factory default.

Press 3 seconds for system reboot.

Press 7 seconds to reset the JetBox to the factory default.

3-6-7 SD Card Slot

This socket is used for a SD Card and users can put their own applications in it.

To access the SD card, you can follow these steps:

1. Unscrew five screws of back cover (Please refer to the picture below).

2. Then remove the back cover and you can insert or take out the SD card.

Korenix | Hardware Feature

13

3-7 JetBox 5633Gf-w USB Holder

JetBox 5633Gf-w has extra two USB slots for 3G/wifi USB dongle expansion.

To tighten the USB dongle, you have two methods and you can follow these steps:

 Use the platen to fix the dongle

1. Slightly loosen the screws and move the platen to appropriate height according to the size of

dongle.

2. Plug the dongle into USB socket.

3. Move the platen to press the dongle and tighten the screws.

Please do NOT loosen the screws too much or the kits would fall off from JetBox.

SD card slot inside

This screw is for fixing SD card,

please do not unscrew it.

14

Hardware Feature | Korenix

 Use cable ties to fix the dongle

1. Take out the cable ties from accessories kit.

2. Use the cable tie to thread through the rear side of guide plate.

3. Surround the USB dongle then tie up the cable tie.

Loosen the screws and move the

platen to appropriate height.

After plug the USB dongle, move

the platen to press the dongle

and tighten the screws.

Use the cable tie to thread

through the rear side of guide

plate.

Surround the USB dongle then tie

up the cable tie.

Korenix | Customer Service

15

If the kits fall off from JetBox, you can refer to below picture to assembly.

3-8 System Login

There’re two methods to login JetBox 5630. One is from web GUI, the other is from Linux console.

Detail information please refers to Linux and Web user manual.

 Web GUI

Login: admin Password: admin

 Console

Login: root Password: (none)

Chapter 4 Customer Service

Korenix Technology Co., Ltd.

Business service: sales@korenixembedded.com, sales@korenix.com

Customer service: koreCARE@korenix.com

Web Site: http://www.korenixembedded.com, http://www.korenix.com