READ ME FIRST!
Reading these brief instructions before attempting
to use your compressor will improve your chances
of success and reduce potential frustrations!
MODEL: C3000V
The C3000-V is a unquie compressor with two modes of use.
AUTO ON/OFF MODE
The compressor has an on demand pressure switch. When the
compressor is switched ON, it will cycle for a few seconds and then
be ready to operate. Depressing the main lever on your airbrush
activates the compressor. Releasing your airbrush lever deactivates
the compressor.
VARIABLE CONTROL MODE
The compressor has an On/Off rocker switch and an adjustable
Control Knob (D). When the compressor is switched ON and the
Control Knob is in the full clockwise position, it will cycle for
a few seconds and then be ready to operate. Depressing the
main lever on your airbrush activates the compressor.
Releasing your airbrush lever deactivates the compressor.
Adjust the air flow by turning the Control Knob. The compressor
does not act as an Auto On/Off and will cycle continuously when
the Control Knob is not in the full clockwise position. Use On/Off
Rocker Switch (A) as required.
GETTING STARTED & OPERATING INSTRUCTIONS
1. Attach your airbrush hose to the 1/4” NPT fitting on the compressor
(C) and attach the other end of your hose to your airbrush.
BE SURE BOTH AIRHOSE CONNECTIONS HAVE A TIGHT SEAL.
2. Connect the power cord to a grounded electrical outlet.
3. Park your airbrush in the built-in airbrush holder located in the
center of the cabinet. This will help prevent any accidental
damage to your airbrush.
4. Switch on and operate airbrush as desired.
5. Switch off when finished.
6. When your work is finished, be sure to remove all traces of
color from your airbrush by flushing with airbrush cleaner or
other suitable cleaning agent. Using a Q-Tip or Cotton Swab
will help you reach inside the airbrush cup.
Airmaster Plus
Compressor
B
A - On/Off Rocker Switch
B - Airbrush Park
C -1/4” NPT Fitting
D - Adjustable Control Knob
Used for:
Scale Model art
Ceramic Painting
Airbrush Make-Up
Airbrush Tattoos
Airbrush Tanning
Airbrush sold separately
C3000V
Variable Control
A
D
0-55psi
C
FOR BEST RESULTS
• Read these instructions above BEFORE using the compressor.
• Ensure your air hose connections have a tight seal to prevent
any air leakage which will reduce the effectiveness of your
compressor.
• The compressor cabinet is made of durable, high impact ABS
and can be cleaned easily with a damp cloth.
Specifications
Size: 9.25" x 7.5" x 5”
Operating Pressure: .5 cfm @ 20 psi
Max Pressure: 55 psi
Compressor: Oil-less piston cylinder type
Electrical: 110/120v 60hz 1.2 Amp (220/240 50hz 0.6 Amp)
MA012 0509
Motor Design: 1/10 Hp Perm. Magnet
DC with solid state rectifier
Weight: 7lbs (3.1kg)
Compressor available in Red, Black or Granite
Warranty & Returns Policy
All Kopykake compressors are tested before shipment and this compressor is guaranteed
against any defect in material or workmanship for a period of 1 year. Any part of the
compressor found to be defective under normal use during the warranty period will be
repaired or replaced by Kopykake at its option. Kopykake assumes no responsibility for
damaged equipment due to negligence by the user. Warranty does not apply to airbrushes.
Returning your compressor:
Any equipment being returned must have a Return Authorization Number (RA#) obtained
from Kopykake. A product returned without an RA# will be subject to a delay in processing.
1.Contact Kopykake for a Return Authorization Number
2.Package your compressor well to avoid damage in transit. Any damage will be assumed
to have occurred prior to shipping so please be sure to protect the unit well
3.Include Proof of Purchase and a note explaining the reason for return
4.Mark the RA# on the note AND the exterior of the package so it can be easily identified
5.Return the compressor via UPS or any other Carrier company
Equipment replaced or repaired under warranty will be returned freight or postage paid by
Kopykake. The warranty period for repaired or replaced parts shall be for the duration
of the original warranty.
We regret that any Returns to Stock will be subject to a 20% re-stocking fee.
3699 West 240th St. Torrance California 90505 USA
Tel: 310-373-8906 Fax: 310-375-5275
sales@kopykake.com www.kopykake.com