Kopp 844500001 User Manual
Kopp einschalten.
Art.-No. VE PG EAN
844500001 1 116
Changeover switch - LED dimmer - for incandescent and 230 V halogen
lamps, dimmable LEDs as well as for low-voltage halogen lamps with
electronical transformers, adjustable basic brightness, shaft 4 mm with soft
locking, phase alignment RC 15-150 W/VA, LED 3-50 W/VA, with fixing nut
and shaft adapter
Technical data 844500001
Assembly arrangement Basic element
Method of operation Turn/push button
Mounting method Flush mounted (plaster)
Type of fastening Mounting with claw and screw
Material Plastic
Material quality Thermoplastic
Surface protection Untreated
Suitable for degree of protection (IP) IP20
Serial dimmer No
Substation input No
Applicable with button No
Applicable with movement sensor No
Applicable with presence indicator No
Applicable with time switch/timer No
Applicable with transmission button No
Applicable with infrared button No
Halogen free Yes
Transparent Yes
Frequency 50Hz
Nominal power 15-150VA
Clever sein.
Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.
Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. +49 6188 40-0 | E-Mail: vertrieb@kopp.eu | www.kopp.eu
Loading...