Kopp einschalten.
Art.-No. VE PG EAN
844400008 1 116
Changeover switch - LED dimmer - for incandescent and 230 V halogen
lamps, dimmable LEDs as well as for low-voltage halogen lamps with
conventional transformers, adjustable basic brightness, shaft 4 mm with
soft locking, phase control, LED 3-100 W/VA, with fixing nut and shaft
adapter
Technical data 844400008
Assembly arrangement Basic element
Method of operation Turn/push button
Mounting method Flush mounted (plaster)
Type of fastening Mounting with claw and screw
Material Plastic
Material quality Thermoplastic
Surface protection Untreated
Suitable for degree of protection (IP) IP20
Serial dimmer No
Substation input No
Applicable with button No
Applicable with movement sensor No
Applicable with presence indicator No
Applicable with time switch/timer No
Applicable with transmission button No
Applicable with infrared button No
Halogen free Yes
Transparent No
Frequency 50Hz
Nominal power 20-250VA
Clever sein.
Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.
Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. +49 6188 40-0 | E-Mail: vertrieb@kopp.eu | www.kopp.eu
Loading...