Kopp 840629041 User Manual
Kopp einschalten.
Art.-No. VE PG EAN
840629041 1 116
INFRAcontrol R 180 UP IP40. Infrared-motion detector. Pure-white. For HK 07
/ Athenis, without Adapter frame. Dimension 55x55mm, 3-wire. 230VAC,
50/60 Hz; Detection angle: 180 degree; Incandescent lamp: 2.000 W;
Fluoescent lamp: 900 VA; LED lamp: 500 W; Halogen lamp: 1.000 W; Delay
time 5-steps: 20 Sec. - 30 min. detection range: until 9 m; Twilight threshold
stepples from 5 Lux.; Settings: ON/OFF/AUTO.; Switch-off warning;
Master/Slave; Impuls output. Degree of protection: IP40
Technical data 840629041
Model Movement sensor
Mounting method Flush mounted (plaster)
Material Plastic
Material quality Duroplast
Surface protection Untreated
Surface finishing Glossy
Colour White
Degree of protection (IP) IP40
Voltage type AC
Sensor type Passive infrared
With DALI interface No
Constant light control No
HVAC-control No
Forced switch on No
Forced switch off No
Animal zone No
Creep-under protection No
Networkable No
Optimum mounting height 1.2m
Staircase monitoring No
Bridging switch No
Max. transmission range frontally 9m
Suitable for wireless transmission No
Remote operation No
With remote control No
Response value sensitivity adjustable Yes
Response value luminosity adjustable Yes
With signal unit No
Teach-function for response value luminosity Yes
Suitable for ceiling mounting No
Suitable for wall mounting Yes
Clever sein.
Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.
Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. +49 6188 40-0 | E-Mail: vertrieb@kopp.eu | www.kopp.eu
Kopp einschalten.
Technical data 840629041
Dim function with dimmer basic element No
Halogen free No
Antibacterial treatment No
RAL-number (akin) 9010
Transparent No
Frequency 50Hz
Nominal voltage 230V
Min. switch-on time 20s
Max. duty cycle 30min
Detection angle horizontal 180°
Response value luminosity 100lx
Max. switching power 2000W
Suitable for C-load Yes
Temperature 0-45°C
Number of switching zones 3
Max. starting current 2A
Substation input Yes
With alarm function No
Width 80mm
Height 80mm
Depth 65mm
Built-in depth 31.5mm
Clever sein.
Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.
Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. +49 6188 40-0 | E-Mail: vertrieb@kopp.eu | www.kopp.eu
Loading...