Kopp 808802008 User Manual

Kopp einschalten.

Art.-No. VE PG EAN

808802008 2 112

Electronic push/change over dimmer for light bulbs and 230V halogen lights,
as well as low voltage halogen lights, for dimmable electronic transformer,
20-325W/VA, 230V~, 50Hz, note transformer manufacturer`s
recommendations, DONAU, arctic-white

Technical data 808802008

Assembly arrangement Basic element with central cover plate
Method of operation Turn/push button
Type of load Capacitive load
Mounting method Flush mounted (plaster)
Type of fastening Mounting with claw and screw
Material Plastic
Material quality Duroplast
Surface protection Untreated
Surface finishing Glossy
Colour White
Colour (user defined) arcticwhite
Suitable for degree of protection (IP) IP20
Serial dimmer No
Substation input No
Light value memory No
Applicable with button No
Applicable with movement sensor No
Applicable with presence indicator No
Applicable with time switch/timer No
Applicable with transmission button No
Applicable with infrared button No
Halogen free Yes
Transparent No
Frequency 50Hz
Nominal power 20-325VA

Clever sein.

Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.

Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. [phone] | E-Mail: [e-mail] | www.kopp.eu