Kopp 803620085 User Manual
Kopp einschalten.
Art.-No. VE PG EAN
803620085 2 112
Sensor dimmer DIMMAT 40-400W/VA, 230V~,50Hz, for light blubs and 230V
halogen lights, as well as low voltage halogen lights, not for electronic
transformator, note transfomer manufacturer`s recommendations, PARIS,
silver
Technical data 803620085
Assembly arrangement Basic element with central cover plate
Type of load Inductive load
Mounting method Flush mounted (plaster)
Type of fastening Mounting with claw and screw
Material Plastic
Material quality Thermoplastic
Surface protection Lacquered
Surface finishing Glossy
Colour Silver
Colour (user defined) silver
Suitable for degree of protection (IP) IP20
Serial dimmer No
Substation input Yes
Light value memory No
Applicable with button Yes
Applicable with movement sensor No
Applicable with presence indicator No
Applicable with time switch/timer No
Applicable with transmission button No
Applicable with infrared button No
Transparent No
Frequency 50Hz
Nominal power 40-400VA
Clever sein.
Technical details, pictures and performance specifications given herein are only non-binding information and must not be seen as guaranteed product characteristics. Amendments based on technical
progress, modification of standards or production process or improvement of engineering are explicitly subject to change.
Heinrich Kopp GmbH | Alzenauer Straße 68 | 63796 Kahl/Main | Tel. +49 6188 40-0 | E-Mail: vertrieb@kopp.eu | www.kopp.eu
Loading...