Kontron CP6-BP8-P47-STD-SL User Manual
CPCI
Backplane
Manual
PRODUCT DOCUMENTATION
PD12
CP6-BP8-P47-STD-SL
Reference ID: 24229 PD12
Revision: 01
Issued: March 01, 2002
The product described in this manual
is in compliance with all applied CE
standards.
PD12: CP6-BP8-P47-STD-SL CPCI Backplane
Revision History
CPCI Backplane Manual:
Manual/Product Title:
Reference ID: 24229 PD12
Product Documentation:
CP6-BP8-P47-STD-SL
Rev.
Index
01 Initial Issue Mar. 01, 2002
Brief Description of Changes Date of Issue
Imprint
Copyright © 2002 PEP Modular Computers GmbH. All rights
reserved. This manual may not be copied, photocopied,
reproduced, translated or converted to any electronic or machinereadable form in whole or in part without prior written approval of
PEP Modular Computers GmbH.
DISCLAIMER:
PEP Modular Computers GmbH rejects any liability for the correctness
and completeness of this manual as well as its suitability for any particular purpose.
This manual was realized by: TPD/Engineering, PEP Modular Computers GmbH.
Page 2 © 2002 PEP Modular Computers GmbH RID 24229 PD12, Rev. 01
CPCI Backplane PD12: CP6-BP8-P47-STD-SL
1. Introduction
The specific product description provided with this product documentation is part of the PEP’s
CPCI Backplane manual. For further information, in particular regarding general details as well
as safety and warranty statements, refer to the CPCI Backplane Manual, ID 24229.
2. CP6-BP8-P47-STD-SL Positronic Type Backplane
The main features of the 6U, 8-slot, Positronic type system slot left backplane CP6-BP8-P47STD-SL are described in the following table:
Table 1: Distinctive Features of Backplane CP6-BP8-P47-STD-SL
Feature Specification
Form Factor
Size
Number of Slots
Bus Resolution
Bus Frequency
Rear I/O Connectivity
Hot-Swap Capability
Power Supply Connectors
Redundant Power Supply
System Management
Flexible Grounding Option
Fan Connector
6U
202.2*262.05 mm
8
(System slot is on the left side of this backplane)
64 bits
33MHz
P3 to P5 on all slots
Yes
Positronic PCIH47, 47-contact
(Power supply connectors are on the right side of this
backplane.)
Yes
Yes
Yes
Yes
MSD Connector
Power LED
PS-ON Connector
Reset Function Connector
RID 24229 PD12, Rev. 01 © 2002 PEP Modular Computers GmbH Page 3
Yes
Yes
Yes
Yes
PD12: CP6-BP8-P47-STD-SL CPCI Backplane
3. Board Layout
Figure 1: CP6-BP8-P47-STD-SL Board Layout (Front)
1
Page 4 © 2002 PEP Modular Computers GmbH RID 24229 PD12, Rev. 01
2
3
54
6
7
8
Loading...