Kontour K3023E User Manual

Kontour Angle
Towel Warmer
Installation Guide
Code: K3023E
24” x 39” Electric Plug-In
Rough-in Requirements (see figure 2) 1
2. Wall studs or plywood backing is recommended in the wall at all bracket locations. See Fig 2 for bracket locations.
Installation Instructions (see figure 1) 2
1. Check all items have been received. Read all instructions before continuing.
2. Fix wall supports "A" to the wall using the screws provided and in locations as shown
on figure 2.
3. Hang and adjust the Towel Warmer using set screws "B" to lock stud "C" in the wall
bracket "A". Ensure the Towel Warmer is firmly and safely fixed.
Electric Plug-In Connection 3
TURN OFF POWER SUPPLY BEFORE PROCEEDING Do not connect the Towel Warmer to the power supply until all instructions have been read and installation carried out in accord with them. Your towel warmer is 165W (110V) and conforms to CSA standards (File ref: 2422531). Please ensure the CSA label is visible.
1. Turn off power supply.
2. Plug connector in.
3. Switch on power supply.
1-877-757-8930 www.kontour.ca
Warning: In case of damage or failure of the Towel Warmer the unit should be returned to the manufacturer or their distributor. The warranty of 2 years on the Towel Warmer is NOT VALID in case of improper use or installation. Product is designed for use within Canada and the United States only.
fig. 1
A
C
B
Specifications & Drawings
Model # Description Finish Weight (lb) Watts WxH (mm) WxH (Inches) Metal Type Volts
K3023E Angle Electric Plug-In Chrome 10.5
165W
600 x 983 23.5 x 38.75 Stainless Steel
110V
Warranty: 2 Years Fixings: Screws, and Allen Key (if needed) are included Care & Maintenance: A periodic wash using warm water and a soft cloth will retain the high quality finish of your towel warmer for
many years to come. ON NO ACCOUNT should any household bleaches, detergents, abrasive polishes, steel wool or other cleaning agents be used on this item.
fig. 2
Loading...