Kontakt Beacon Pro User Manual

Kontakt Micro-Location

website: kontakt.io

email: [e-mail]

Kontakt Beacon User Manual

General Description

Kontakt Beacon is an electronic device based on Bluetooth Low Energy® which
broadcasts radio signals called advertising packets. Those signals can be
received without the need to pair, with any devices which are in range and are
equipped with Bluetooth 4.0. Thanks to receiving those packets, mobile devices
can precisely estimate their distance and relative location without using other
systems like GPS.

Maintenance

Kontakt Beacons are maintenance-free devices. They work constantly and they
are ready to be used in ‘out of the box’ manner. There is no need to turn the
beacon on or active in any way. They are ready to perform since programmed
and assembled. In case of possible malfunctioning users are advised to contact
technical support to get proper replacements (email: [e-mail]).
Replacement policy also applies to performance faults caused by batteries
running low after a long time use. The manufacturer logo is placed on the top
of the device’s casing and more details about it can be found on its box.

Installation

Kontakt Beacons can be fixed on the wall using a proper nail or a screw thanks
to specially created mounting bracket. Make sure that Beacon adheres to the
mounting surface firmly. Alternatively, you can use double-side adhesive tape
and stick it to a flat and smooth surface. Beacons should be placed similarly to
the way they might be hanging if mounted using nails. It’s also important to be
aware of the fact that Beacons are installed in the right direction, meaning the
manufacturer logo must be on the opposite form the sticky tape and the
mounting surface. If beacons are installed this way, user takes responsibility for
choosing the right adhesive that is able to keep beacons in proper places. We
recommend using at least 4cm2 of the sticky tape with viscosity of 10N/cm.

Copyright © 2017 Kontakt Micro-Location LLC. All rights reserved.

Kontakt Beacon Pro User manual

WARNING

Opening beacons or fixing them is strictly forbidden.

Kontakt Beacons contain electronic elements and batteries which should be
properly disposed. If you ever want to utilise beacons, please contact
manufacturer first.

Switching the original batteries with one of a different types might cause a
risk of explosion.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

No changes shall be made to the equipment without the manufacturer’s

permission as this may void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This transceiver must not be co‐located or

operating in conjunction with any other antenna or transmitter. In accordance

with FCC requirements of human exposure to radio frequency fields, the

radiating element shall be installed such that a minimum separation distance of

20cm is maintained from all persons.

ISED Canada Compliance Statement

This device complies with Industry Canada license‐exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and