Konig & Meyer 23860 Specification

23860

Microphone desk arm

Product variant

23860-311-55 - black

Data

Clamping range up to 48 mm
Connection 3-pin XLR-cable 6 m
Length from 460 to 960 mm
Max. load capacity 1.5 kg
Threaded connector 3/8" and 5/8"
Type black
Weight 1.3 kg

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick
and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone
cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 0 to 48 mm
allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts
guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and
round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.