Konig SEC-CON22 User Manual

1

SEC-CON22

Speed Dome Controller

2

Contents

1. Summary ------------------------------------------------------------------------------------------------------------------- 3

1.1 Notice ---------------------------------------------------------------------------------------------------------------------- 3

1.2 Function & Characteristic -----------------------------------------------------------------------------------------------3

1.3 Technical Data ------------------------------------------------------------------------------------------------------------3

2. Keyboard connection ------------------------------------------------------------------------------------------------------- 4

2.1. RS485 interfaces-------------------------------------------------------------------------------------------------------------- 4

2.2 Connect matrix -----------------------------------------------------------------------------------------------------------------4

2.3 Direct connect with Dome--------------------------------------------------------------------------------------------------5

2.4 Keyboard connection in the System-----------------------------------------------------------------------------------------5

3. Keyboard operation instruction --------------------------------------------------------------------------------6

3.1 Electrify ------------------------------------------------------------------------------------------------------6

3.2 LED display screen ---------------------------------------------------------------------------------------------6

3.3 Joystick controls dome -------------------------------------------------------------------------------------7

3.4 Rigger the aim dome -----------------------------------------------------------------------------------------7

3.5 Dome lens control -----------------------------------------------------------------------------------------7

3.6 Set dome function--------------------------------------------------------------------------------------------7

3.6.1 Preset-----------------------------------------------------------------------------------------------------------7

3.6.2 Scan---------------------------------- ----------------------------------------------------------------------7

3.6.3 Pattern----------------------------------------------------------------------------------------------------------7

3.6.4 Cruise----------------------------------------------------------------------------------------------------------8

3.7 Call dome main menu------------------------------------------------------------------------------------------8

3.8 Matrix Control-----------------------------------------------------------------------------------------------8

3.8.1 Switch dome in order-----------------------------------------------------------------------------------------8

3.8.2 Call matrix main menu---------------------------------------------------------------------------------------8

3.8.3 Confirm after program---------------------------------------------------------------------------------------8

3.8.4 Change object monitor---------------------------------------------------------------------------------------8

4. Keyboard control---------------------------------------------------------------------------------------------------------------8

4.1 Keyboard parameter setup---------------------------------------------------------------------------------------------------9

4.1.1Keyboard ID setup-----------------------------------------------------------------------------------------------------------9

4.1.2 Keyboard baud rate setup-------------------------------------------------------------------------------------------------10

4.1.3 Navigation key adjust------------------------------------------------------------------------------------------------------10

4.1.4 Display Keyboard information -------------------------------------------------------------------------------------------11

4.2 Dome setup-------------------------------------------------------------------------------------------------------------------11

4.2.1 Pre-set setup----------------------------------------------------------------------------------------------------------------11

4.2.2 Dome Scan setup-----------------------------------------------------------------------------------------------------------12

4.2.3 Pattern setup----------------------------------------------------------------------------------------------------------------12

4.2.4 Tour setup---------------------------------------------------------------------------------------------------------------13

4.3 Protocol setup---------------------------------------------------------------------------------------------------------------14

4.4 Exit Keyboard menu-------------------------------------------------------------------------------------------------------14

5. Appendix ----------------------------------------------------------------------------------------------------------------------14

5.1 RS485 Bus general knowledge--------------------------------------------------------------------------------------------14

5.2 Keyboard shortcut instruction---------------------------------------------------------------------------------------------16

6. Keyboard menu index---------------------------------------------------------------------------------------------------------18

3

1. Summary

The keyboard is a universal keyboard of security monitoring series, which can control the ball-type
integrated camera of all kinds protocols matrix, which has been equipped with Joystick which can
control the revolving of the camera and the zoom magnification of lens; with the LCD screen and the
function of back-light; which can display the current operation order the control protocol name the
current dome ID the current monitor ID and the state of joysticks. The user can control the CCTV
system more easily with the joystick and the LCD screen.

1.1Notice

Please read the manual carefully and reserve it.
Please advert to the notice in manual.
Please don't place the keyboard in the moist place.

1.2 Function and Characteristic

●Rs485 Bus Line, and a keyboard can connect 31 domes at most in the direct control mode.

●can be compatible with all kinds of protocols.

●can control the Iris Focus and Zoom.

●can set and call the preset, run the scanning the pattern and the tour。

●can control the matrix and through which can control the dome indirectly.

●equipped with the 3D Joystick and a LCD screen

●The LCD can display the current operation order, the control protocol name, the current dome ID ,the

current monitor ID and the state of joysticks.

●Infrared ray emission，emission the same data & content as RS485

1.3 Technical Data

★Electrical character

Input voltage：9V-12V DC

Rating Power：0.5W

★Communicate character

Communicate interface：RS485×1,infrared emission
Communicate frequency：2400、4800、9600、19200bps
Communicate distance：RS485 can reach 1.2Km,infrared emission reaches 10m.

★Operational environment

Operating temperature：0℃～50℃
Relative humidity less than 90%

★Physical property
L*W*H=168mm*136mm*105mm

Weight：845g

4

2.Keyboard Connection

There is interface on the back of the keyboard, which equipped with kinds of communication
Interface RS485 and infrared emission, which can connect with and control kinds of peripheral
equipments.

2.1. RS485 interfaces

Rs485 interfaces are on the 2bit ribbon cable connection of the keyboard.RS485 A+ B-) can
connect with the dome when the keyboard controls the dome directly;RS485 A+B-can connect with
DVR or other keyboards when the keyboard controls the dome by matrix

2. 2 Direct connect with Dome

Keyboard connect the Dome wit RS485。The RS485 interface of the Dome is on the commutator of the
Dome.Press the metal button in the hanging frame，open the commutator, will find a 4bit power jack，follow the
surface instruction to find RS485（A+，B-）follow the instruction。Maybe a different connect way when come from
different manufacturer。

DC 12V A+ B-

RS485 A+B-

Figure 2-3.1

Dome

Keyboard

Power/RS485

IR remote control

5

2. 3 Keyboard connection in the system

Indirect control the dome when connect with matrix（as figure 2-4.1）。 contrariwise will control the domes
directly，Parallel connect the keyboard and dome to the bus of RS-485，all the keyboard can control any dome
among them, under this way, the add of the main keyboard should be “1” and baud rate should be 9600bps（as
figure 2-3.1）

Figure 2 -4.1

Caution

1、the max quantity of master equip and be charged equip controlled by a RS485 bus is，so when use the
keyboard to control direct the max dome quantity is 3

2、max quantity keyboard in a system is 4,also the 4 keyboards should be different ID

matrix

Dome1

Dome2

Figure 2-4.2

Keyboard 1

Keyboard 2

Keyboard 3

Dome 1

Dome 2

Dome 3

Dome 4

Keyboard 4

Dome 5

Dome 6

Dome 7

Dome 8

Keyboard

6

3. Keyboard operation instruction

Attention please because different system have some different special operation ways, so should consider the

actual requirement when operation in some special systems

３.1 Electrify

When the power is on, the keyboard will automatically check the baud rate、protocol of the keyboard、aim

dome and the aim monitor, and all the info. will be displayed on LCD screen.

Attention

3.2 LCD display screen

LCD screen display contents：aim dome、aim monitor and baud rate etc. And at the end of the content will

show the current operation order and the states of joystick, as follows figure show .When operation，LCD
back light will on，and will be off 10s after the operation。

Figure 3-1.2

Camera
Monitor
Protocol :
Baud rate ：

Figure 3-1.1

The joystick should be nil when keyboard is initializing

ID：001
ID：001
Pelco-d
2400bps

LCD screen

lens control

3D joystick

Number keys

Function keys