SEC-CAMIP30
SEC-CAMIP40
SEC-CAMIP40EC
MANUAL (p. 2)
IP Cam System User’s Manual
Manual IPCAM V4.0.3 EN
2
Contents
1 IPCAM system ........................................................................................................................................... 3
1.1 How to install .................................................................................................................................. 3
1.2 How to Add a device into IP Cam System...................................................................................... 5
1.3 Video via Internet............................................................................................................................ 6
1.4 How to use IP Cam System............................................................................................................ 8
2 Search Tool .............................................................................................................................................. 17
2.1 How to use Search Tool................................................................................................................ 17
2.2 Connect IP Cam and computer .................................................................................................... 19
3 IP Cam Mobile.......................................................................................................................................... 21
3.1 Video monitoring on iPhone ......................................................................................................... 21
3
1. IPCAM system
1.1 How to install
Insert the software CD in your CD-R device, start the installation. Choose Shelexec.exe to start installing
the software or check the disc contents and click the startup.html file to open the start up page. The
following starting screen appears.
Click "install software".
4
1.1.1 Click Next to start the installation.
1.1.2 Click Next.
1.1.3 Click Install.
1.1.4 Click Finish to complete IP Cam System installation.
Check the Finished box if you wish to run
User’s Manual
automatically.
Note: Adobe Reader is needed
Run DB Upgrade Tool to check if your application is ready for an upgrade. Click Upgrade if it prompts
Incompatible database version
as figure. Then close DB Upgrade Tool and restart IP Cam System.
Tips:
Start Menu → All Programs → IP Cam System → DBUpgrade Tool
5
1.2
How to Add a device into IP Cam System
1. Select an empty channel
2. Click
Add a device
3. Press
Search
or type in ID and Password of your device
(Note:
Search
function can be used under local network only)
4. Press
Save
5. Click
Start all cameras
in IP Cam setting
Notice:
1. Device can be searched automatically. Please check the Home plug LED signal if no device found
(only SEC-CAMIP40, SEC-CAMIP40EC)
2. If the device is automatically searched, the User ID and User Password fields must be set before
saving. And, the specified ID & Password will update the original ID & Password.
6
1.3 Video via Internet
1. Select an empty channel
2. Select
Add one device
3. Type in your Device ID / Password (Printed on the product body)
Type in your User ID / Password (Set up by user, can be edited, please refer to Search Tool )
4. Press Save
5. Click Start all cameras in IPCam setting
Notice:
Make sure the camera is connected to the internet if failed to load video.
If the problem still can’t be solved, follow the steps below and provide the information to your supplier.
1. Right click mouse on the display channel
2. Select TST
3. Provide the information to your supplier
7
8
1.4 How to use IP Cam System
A. IP Cam Setting
Edit Device Setting
Edit device Basic Info / Alarm Setting / Schedule recording
Add one device
Add a new device on display channel.
Delete selected device
Delete the selected device from display channel.
Start all cameras
Start all connection with camera device.
Stop all cameras
Stop all connection with camera device.
Edit Device Setting
Edit device Basic Info / Alarm Setting / Schedule recording
9
Basic Info
Device ID
Each individual ID shown on back of IP Cam
Device Password
Each individual password shown on back of IP Cam
Channel Name
Edit camera name.
User ID / User Password
Each user’s personal ID and password
Alarm Setting:
After selecting Enable Alarm, click Motion detection setting to
adjust the sensitivity and Email setting.
Enable Alarm
Set to
Full time alerted
or
Schedule alert
Motion detection
Click
Setting
to adjust motion detection sensitivity
Alarm Methods
Alarm sound/Snap shot/Recording/Send Email
Email setting
Refer to your outlook account information of
SMTP/Account/Password.
Note:
Email alert can work properly only when Internet is connected.
Channel Name
10
Schedule Alert
Add one duration
Edit selected duration
Delete selected duration
Select
Add one duration
to schedule alarm
Set days and time or full time alarming
The icons below shows the status on this device
Alarm has been enabled
Alarm detected on channel
Schedule recording
11
Schedule Recording:
Select enable schedule recording
Add one duration
Edit selected duration
Delete selected duration
Select Add one duration to schedule recording
Set days and time or full time recording
B. Display Setting
a. 4 Channel
b. 6 Channel
c. 9 Channel
d. 16 Channel
Full Screen Mode:
Double left click mouse of selected channel to switch to full screen mode, double left click again to switch
back.
C. Main function
a. Search Tool
b. History
c. System Setting
d. About IP Cam System
a
b
c
d
a
c
b
d
12
Search Tool
Use to set up IP Cam (Local network only)
System Setting
Reconnect IP Cam
Auto reconnects IP Cam when disconnected.
Alarm Setting
Sound effects file
Select your preferable sound when alarming.
Snap shot and video recording path
Setup save folder for the recorded files and snapshots.
Overwrite video
Set up the occupy disk space.
Set up the system start status
video stretch/status bar/confirm when system close
Stretch Video
a. Normal Mode
b. Stretch video
c. Right click mouse on selected image
Status Bar
1. When new version is available, this field will show it. Click to enter download page.
2. This field shows the link mode of specified video channel. It is a texture description of the icon on the
up-right corner of video display:
Status Bar
a
b
c
13
[LAN Mode] Your PC and IPCam are on local area network. (icon
)
[P2P Mode] Images directly come from IPCam on Internet. (icon
)
[Relay Mode] Images go through relay server. Slow frame rate. (icon
)
3. This field shows PC's IP.
4. This field shows the date and time when IPCam executed.
Confirm when system close
History of video/ snapshot
Playback video
1. Select device
2. Choose history data
3. Playback back
Select device
Record file
History data
Data location in PC Duration of data
Stop
Pause
Play
Playback
Snapshot history
14
History of snapshot
About IP Cam System
Version of your IP Cam System and User’s Manual.
Image location Open folder
Image history
15
D. Display Channels
a Relay Mode
b Video source via local network
c Video source via Internet
d Frames per second
e Video recording
f Snapshot manually
Shortcut function
Right click on the display channel
Disconnect
Disconnect the device.
Stretch video
Stretch video display.
Edit device
Edit device Basic Info/Alarm Setting and Schedule recording.
Delete this device
Delete the selected device.
a
f
e
d
b c
16
Snapshot
Take picture of the selected device.
Manual recording
Start recording instantly.
E. Device Control
Selected device
Shows the IP address/ Device ID of the selected camera
Pan/Tilt Control
For control the camera angle. (For selected model only)
Video adjust
Adjust light condition/resolution/video quality.
Light condition: Indoor/Outdoor/Night vision
Resolution: 640*480/320*240/160*120
Video quality: From highest to lowest
17
2 Search Tool
2.1 How to use Search Tool
Click
IP CAM Setup
Search Tool helps setting up your IP cam directly.
Note:
This software can be operated under the local network only
A Device List
B Basic Settings
C Authentication of Device
1. Search for cameras under local network
2. Info of camera found
Note:
In this preview window, all the changes are directly saved to your device.
A. Device List
18
Brightness
Select brightness by clicking on
Low, Standard
, or
High
.
Quality
+
: for clear picture and bigger file size
-
: for less picture quality and smaller file size
Environment
Please select the
Indoor, Outdoor
or
Night
mode, depending on
the environment condition.
Position
Normal / Flip / Mirror
B. Basic Settings
Environment
Night / Indoor / Outdoor
Frequency
50 Hz or 60Hz based on your AC power’s frequency.
USA and countries in South America 60Hz
Taiwan 60Hz
Japan 50Hz / 60Hz both
Most of countries in European / Middle East / Africa 50Hz
C. Authentication
Set up your personal account and password. Once been set,
It can only be changed or deleted under local network
Notice:
User Authority is for the security use, we strongly suggest you to set up your own ID and password once you
begin to use the product.
19
2.2 Connect IP Cam and computer
Use Search Tool to start the connection
1. Please click search, then select an IP cam on the list.
Set IP address for PC and Camera
2. Make sure the IPs of LAN and IPCAM are the same, except the last block
Disable Auto
DHCP Setting
20
Changing IP Address in Windows
Click
Start
button → Right click
My Network Places
icon → click
Properties
→ Right click
Local Area
Connection
icon → Click
Properties
→ click
Internet Protocol [TCP/IP]
icon → click
Properties
IP address in PC
21
3. IP Cam Mobile, see also starting screen
Please download thededicated video monitoring software for Apple OS4 and Android operation
system. For further detail please visit web page as below:
http://www.p2pipcam.com/3g
All other Smart Phones users please use web browser to visit Allmycloud server as below:
http://www.allmycloud.com
Please refer to the example for iPhone as below and refer to the user’s manual of your phone for
more operation details.
Video monitoring on iPhone
To use the App Store, iPhone must be connected to the Internet.
P2P IPCam Lite is free; you can download it without charge.
Once you download it, it’s immediately installed on your iPhone. Then follow the steps below:
Your device ID/Password
(Ex. AAAA0001/12345678)
User ID/Password (Set on
Search Tool)
Search for "p2p
ipcam lite"
Launch "p2p
ipcam lite"
Launch
App Store
Launch Select setting
to set up IPCam info
for first time
P2PIPCam
Select a Camera
Loading...