Konig KN-HDMISW10, KN-HDMISW20 User Manual

KN-HDMISW10 KN-HDMISW20
2
2 PORT HDMI SWITCH 4 PORT HDMI SWITCH
7
2-PORT-HDMI-SWITCH 4-PORT-HDMI-SWITCH
COMMUTATEUR HDMI 2 PORTS COMMUTATEUR HDMI 4 PORTS
17
2 POORTS HDMI SWITCH 4 POORTS HDMI SWITCH
22
COMMUTATORE HDMI A 2 PORTE COMMUTATORE HDMI A 4 PORTE
27
CONMUTADOR HDMI DE 2 PUERTOS CONMUTADOR HDMI DE 4 PUERTOS
32
2-PORTOS HDMI KAPCSOLÓ 4-PORTOS HDMI KAPCSOLÓ
37
2 PORTIN HDMI-KYTKIN 4 PORTIN HDMI-KYTKIN
42
2 PORTARS HDMI-BRYTARE 4 PORTARS HDMI-BRYTARE
47
2 PORTOVÝ PŘEPÍNAČ SIGNÁLU HDMI 4 PORTOVÝ PŘEPÍNAČ SIGNÁLU HDMI
52
SWITCH CU 2 PORTURI HDMI SWITCH CU 4 PORTURI HDMI
Power button
select button
2
ENGLISH
Introduction:
The HDMI switch routes high defi nition video (in multiple resolutions up to 1080p) and digital audio from any of the several sources to display units. All the inputs accommodate the connections of the high defi nition video sources simultaneously, such as satellite systems and HD DVD players. The output sends the high defi nition audio/video signals to a high defi nition display. Switching is done via the IR remote that is provided with the unit or by the selection button on the switch.
Features:
• Support with HDMI1.3b
• Supports 12-bit deep colour
• 24K gold plated connector
• High performance up to 2.5 GBps
• Switches easily between several HDMI sources
• Maintains high resolution video - sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved
• Discrete IR remote (included)
• HDMI pass-through
• HDCP pass-through
Specifi cations:
Signal Inputs/Output
Input Video Signal 0.5-1.0 V p-p Input DDC Signal 5 V p-p (TTL) Maximum Single Link Range 1920X1200, 1080p Output Video HDMI 1.3b + HDCP 1.0/1.1
Video format supported
VGA 640x480, 800x600, 1024x768, 1920x1200 DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
Digital Signal I/O
HDMI Compliance HDMI 1.3b
Operating Frequency
Video Amplifi er Bandwidth 2.5 GBps/250 MHz Frequency Up to 250 MHz
Resolutions (HDTV)
Interlaced (50&60Hz) 480i, 576i, 1080i Progressive (50&60Hz) 480p, 576p, 720p,1080p
Environmental
Operating Temperature 0 °C to +70 °C Operating Humidity 10% to 85 % RH (no condensation) Storage Temperature -10 °C to +80 °C Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5 V DC@2A
Regulatory Approvals
Converter Unit FCC, CE, UL Power Supply UL, CE, FCC
3
Channel Selection:
You can select the channels you want to access in 2 ways: front panel push button selection and the remote control included with the package content.
Front panel push button selection:
The front panel push button is used to select the desired channel on the HDTV. Pressing the button during normal operation will cause the next channel to be selected.
Remote control selection:
The channel can also be selected by the remote control. Push the IR code button on the remote panel for 2 seconds.
Connections:
Front view:
Rear view:
1) Power switch Remote control:
2) Power indication LED
3) Infra Red eye
4) Selected port LED
5) Output indication LED
6) Selection push button
7) Output HDMI port
8) Input HDMI port
9) Power adapter connection
10) Input port selection buttons
4
Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the HDMI input source into the HDMI switcher. (Input cables are optional)
• Connect the HDMI output device into the switcher.
• Insert the DC side of 5 V power supply into the switcher and then connect the AC side of the power supply into the wall outlet.
• Power on all input and output devices.
HDMI DVD
HDMI DVD
HDMI DVD
HDMI DVD
HDMI Switch
HDMI Monitor
Warning: If a DVI device does not appear to work, make certain that the device is HDCP compliant. A non-HDCP compliant DVI device will not work with a signal that has HDCP encoding present
5
Declaration of conformity
We, Nedis B.V.
De Tweeling 28 5215MC ’s-Hertogenbosch The Netherlands Tel.: 0031 73 599 1055 Email: info@nedis.com
Declare that product: Name: HDMI switch 2 & 4 port Model: KN-HDMISW10 & KN-HDMISW20 Description: HDMI signal switch 2 or 4 input to 1 output
Is in conformity with the following standards EMC: EN 55022: 1998 + A1: 2000 + A2: 2003 EN 55024: 1998 + A2: 2003 LVD: EN 5502 2: 200 6 EN 61000-3-2: 2000 + A2: 2005 EN 61000-3-3: 1995 + A1: 2001 + A2: 2005 EN 55024: 1998 + A1: 2001 + A2: 2003
Following the provisions of the 2004/108/EC directive.
‘s-Hertogenbosch, 2 February 2008
Mrs. J. Gilad Purchase Director
6
Safety precautions:
CAUTION
RISK OF EL ECTRIC SHOCK
DO NOT OPEN
To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifi cations of the product or damage caused due to incorrect use of this product.
General:
Designs and specifi cations are subject to change without notice. All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products.
Copyright ©
7
DEUTSCH
Einführung:
Der HDMI-Switch leitet High Defi nition Videos (in mehreren Aufl ösungen bis zu 1080p) und Digital Audio von einer der angeschlossenen Quellen zum Anzeigegerät. Alle Eingänge ermöglichen die simultane Wiedergabe von HD Video von z.B. Sat-Receiver und HD DVD­Player. Der Ausgang sendet die High Defi nition Audio-/Videosignale zu einem HD Display. Das Umschalten erfolgt über die Infrarot-Fernbedienung, die mit dem Gerät mitgeliefert wird, oder über die Auswahltaste am Switch.
Merkmale:
• Unterstützt HDMI1.3b
• Unterstützt Farbtiefe von 12 Bit
• Mit 24K vergoldeten Anschlüssen
• Hoher Durchsatz bis zu 2,5 GBit/s
• Schaltet leicht zwischen mehreren HDMI-Quellen um
• Bewahrt die hohe Aufl ösung der Videos - wunderbare, scharfe HDTV-Aufl ösungen bis zu 1080p, 2k und Computeraufl ösungen bis zu 1920 x 1200 sind leicht zu erreichen
• Diskrete Infrarot-Fernbedienung (beigefügt)
• HDMI Pass-Through
• HDCP Pass-Through
Technische Daten:
Signaleingänge/-ausgang
Eingangsvideosignal 0,5-1,0 V Spitze-Spitze Eingangs-DCC-Signal 5 V Spitze-Spitze (TTL) Maximaler Single-Link-Bereich 1920X1200, 1080p Ausgangsvideosignal HDMI 1.3b + HDCP 1.0/1.1
Unterstütztes Videoformat
VGA 640x480, 800x600, 1024x768, 1920x1200 DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080p
Digitalsignal-E/A
HDMI-Erfüllung HDMI 1.3b
Betriebsfrequenz
Videoverstärkerbandbreite 2,5 GBit/s und 250 MHz Frequenz Bis zu 250 MHz
Aufl ösungen (HDTV)
Interlaced (50&60 Hz) 480i, 576i, 1080i Progressive (50&60 Hz) 480p, 576p, 720p,1080p
Umgebungsbedingungen
Betriebstemperatur 0 °C bis +70 °C Betriebsluftfeuchtigkeit 10% bis 85 % RH (keine Kondensation) Lagertemperatur -10 °C bis +80 °C Lagerluftfeuchtigkeit 5% bis 90 % RH (keine Kondensation)
Strombedarf
Externe Stromversorgung 5 VDC @ 2 A
Gesetzliche Genehmigungen
Konvertereinheit FCC, CE, UL Stromversorgung UL, CE, FCC
8
Kanalauswahl:
Sie können die Kanäle, die Sie erreichen wollen, auf 2 Arten auswählen: durch die Drucktasten an der Fronttafel und durch die Fernbedienung, die der Packung beigefügt ist.
Auswahl über Drucktaste an der Fronttafel: Die Drucktaste an der Fronttafel wird verwendet, um den gewünschten Kanal auszuwählen. Durch das Drücken der Taste im normalen Betrieb wird der nächste Kanal ausgewählt.
Auswahl mit Fernbedienung:
Der Kanal kann auch mit der Fernbedienung ausgewählt werden. Drücken Sie 2 Sekunden lang die entsprechende Taste auf der Fernbedienung.
Anschlüsse:
Vorderansicht:
Rückansicht:
1) Netzschalter Fernbedienung:
2) Netzanzeige-LED
3) Infrarotauge
4) LED für ausgewählten Port
5) LED-Anzeige für Ausgang
6) Auswahltaste
7) HDMI-Ausgangsport
8) HDMI-Eingangsport
9) Netzteilanschluss
10) Auswahltasten für Eingangsport
9
Anschlüsse und Bedienung:
Achten Sie vor der Installation bitte darauf, dass alle Geräte, die Sie anschließen möchten, ausgeschaltet sind.
• Stecken Sie die HDMI-Eingangsquelle in den HDMI-Switch. (Eingangskabel sind optional)
• Stecken Sie das HDMI-Ausgangsgerät in den Switch.
• Stecken Sie das Kabel des Netzadapters in den Netzteilanschluss des Switch und dann den Netzadapter in eine Netzsteckdose.
• Schalten Sie alle Ein- und Ausgangsgeräte an.
HDMI-DVD
HDMI-DVD
HDMI-DVD
HDMI-DVD
HDMI-Switch
HDMI-Monitor
Warnung: Wenn ein DVI-Gerät nicht zu funktionieren scheint, überzeugen Sie sich davon, dass es HDCP erfüllt. Ein DVI-Gerät, das HDCP nicht erfüllt, funktioniert nicht mit einem Signal, das HDCP-verschlüsselt ist.
10
KONFORMITÄTSERKLÄRUNG
Wir, Nedis B.V.
De Tweeling 28 5215MC ’s-Hertogenbosch Niederlande Tel.: 0031 73 599 1055 Email: info@nedis.com
erklären, dass das Produkt: Name: HDMI-Switch mit 2 & 4 Ports Modell: KN-HDMISW10 & KN-HDMISW20 Beschreibung: HDMI-Signal Schalter für 2 oder 4 Eingänge auf 1 Ausgang
den folgenden Standards entspricht: EMV: EN 55022: 1998 + A1: 2000 + A2: 2003 EN 55024: 1998 + A2: 2003 LVD: EN 5502 2: 200 6 EN 61000-3-2: 2000 + A2: 2005 EN 61000-3-3: 1995 + A1: 2001 + A2: 2005 EN 55024: 1998 + A1: 2001 + A2: 2003
Erfüllt die Vorschriften der Direktive 2004/108/EC.
‘s-Hertogenbosch, 26. Februar 2008
J. Gilad Einkaufsleiterin
11
Sicherheitsvorkehrungen:
VORSICHT
STROMSCHLAGGEFAHR
NICHT ÖFFNEN
Um das Risiko eines elektrischen Schlags zu verringern, sollte dieses Produkt AUSSCHLIESSLICH von einem
autorisierten Techniker geöffnet werden, wenn eine Wartung erforderlich ist. Trennen Sie das Produkt vom Stromnetz und anderen Geräten, wenn ein Problem auftreten sollte. Sorgen Sie dafür, dass das Gerät nicht mit Wasser oder Feuchtigkeit in Berührung kommt.
Wartung:
Nur mit einem trockenen Tuch säubern. Keine Lösungsmittel oder Schleifmittel verwenden.
Garantie:
Es kann keine Garantie oder Haftung für irgendwelche Änderungen oder Modifi kationen des Produkts oder für Schäden übernommen werden, die aufgrund einer nicht ordnungsgemäßen Anwendung des Produkts entstanden sind.
Allgemeines:
Konstruktionen und technische Daten können ohne vorherige Ankündigung geändert werden. Alle Logos, Marken und Produktnamen sind Warenzeichen oder registrierte Warenzeichen ihrer jeweiligen Eigentümer und werden hiermit als solche anerkannt.
Achtung:
Dieses Produkt ist mit diesem Symbol gekennzeichnet. Es bedeutet, dass die verwendeten elektrischen und elektronischen Produkte nicht im allgemeinen Haushaltsmüll entsorgt werden dürfen. Für diese Produkte stehen gesonderte
Sammelsysteme zur Verfügung.
Copyright ©
12
FRANÇAIS
Introduction :
Le commutateur HDMI achemine le signal vidéo haute défi nition (en plusieurs résolutions jusqu'à 1080p) et le signal audio numérique de plusieurs sources vers les unités d'affi chage. Toutes les entrées reçoivent les connexions des sources haute défi nition simultanément, comme les systèmes satellites et les lecteurs DVD HD. La sortie envoi les signaux audio/vidéo haute défi nition à un écran haute défi nition. La commutation s'effectue à l'aide de la télécommande infrarouge fournie avec l'appareil ou avec la touche de sélection sur le commutateur.
Caractéristiques :
• Prise en charge HDMI1.3b
• Prise en charge profondeur de couleur 12 bits
• Connecteur plaqué or 24K
• Haut débit jusqu'à 2,5 GBps
• Facilité de commutation entre les différentes sources HDMI
• Conserve la haute résolution vidéo. Permet d'obtenir de superbes résolutions HDTV nettes jusqu'à 1080p, 2k et résolution d'ordinateur jusqu'à 1920 x 1200
• Télécommande infrarouge discrète (fournie)
• Intercommunication HDMI
• Intercommunication HDCP
Caractéristiques techniques :
Signal entrées/sortie
Signal vidéo d'entrée 0,5-1,0 V p-p Signal DDC d'entrée 5 V p-p (TTL) Plage maximum sur port individuel 1920X1200, 1080p Sortie vidéo HDMI 1.3b + HDCP 1.0/1.1
Formats vidéo pris en charge
VGA 640x480, 800x600, 1024x768, 1920x1200 DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
Signal numérique E/S
Conforme HDMI HDMI 1.3b
Fréquence de fonctionnement
Bande passante de l'amplifi cateur vidéo 2,5 GBps/250 MHz Fréquence Jusqu'à 250 MHz
Résolutions (HDTV)
Entrelacé (50&60 Hz) 480i, 576i, 1080i Progressif (50&60 Hz) 480p, 576p, 720p,1080p
Environnement
Température de fonctionnement de 0 °C à +70 °C Humidité de fonctionnement de 10 % à 85 % HR (sans condensation) Température de stockage de -10 °C à +80 °C Humidité de stockage de 5 % à 90 % HR (sans condensation)
Alimentation
Alimentation externe 5 V DC@2 A
Homologations réglementaires
Unité de conversion FCC, CE, UL Alimentation électrique UL, CE, FCC
13
Sélection du canal :
Vous pouvez sélectionner les canaux auxquels vous voulez accéder de 2 manières : avec le bouton-poussoir de sélection en façade ou avec la télécommande fournie avec l'appareil.
Sélection avec le bouton-poussoir en façade :
Le bouton-poussoir en façade est utilisé pour sélectionner la chaîne désirée sur la TV haute défi nition. Appuyez sur le bouton pendant le fonctionnement normal pour sélectionner la chaîne suivante.
Sélection avec la télécommande :
Les chaînes peuvent aussi être sélectionnées avec la télécommande. Appuyez sur le bouton de code IR sur la télécommande pendant 2 secondes.
Raccordements :
Vue de face :
Vue arrière :
1) Interrupteur Télécommande :
2) LED indiquant l'alimentation
3) Capteur infrarouge
4) LED port sélectionné
5) LED indiquant la sortie
6) Bouton-poussoir de sélection
7) Port HDMI de sortie
8) Port HDMI d'entrée
9) Raccordement pour adaptateur secteur
10) Touches de sélection du port d'entrée
14
Raccordement et fonctionnement :
Avant l'installation, assurez-vous que tous les appareils que vous voulez brancher sont éteints.
• Branchez la source d'entrée HDMI sur le commutateur HDMI. (les câbles d'entrée sont en option)
• Branchez l'appareil de sortie HDMI sur le commutateur.
• Branchez l'alimentation 5 V d'abord sur le commutateur (côté continu), puis dans la prise murale (côté alternatif).
• Mettez en marche tous les appareils d'entrée et de sortie.
DVD HDMI
DVD HDMI
DVD HDMI
DVD HDMI
Commutateur HDMI
Écran HDMI
Attention : Si un appareil DVI semble ne pas fonctionner, assurez-vous que l'appareil est compatible HDCP. Un appareil DVI non compatible HDCP ne fonctionnera pas avec un signal comportant un encodage HDCP
15
DECLARATION DE CONFORMITE
Nous, Nedis B.V.
De Tweeling 28 5215MC ’s-Hertogenbosch Pays Bas Tél : 0031 73 599 1055 Couriel : info@nedis.com
Déclarons que le produit : Nom : Commutateur HDMI 2 et 4 ports Modèle : KN-HDMISW10 & KN-HDMISW20 Description : Commutateur de signal HDMI 2 ou 4 entrées vers 1 sortie
est conforme aux normes suivantes: EMC : EN 55022: 1998 + A1 : 2000 + A2 : 2003 EN 55024: 1998 + A2 : 2003 LVD : EN 55022: 2006 EN 61000-3-2: 2000 + A2 : 2005 EN 61000-3-3: 1995 + A1 : 2001 + A2 : 2005 EN 55024: 1998 + A1 : 2001 + A2 : 2003
suivant la directive 2004/108/CEE.
‘s-Hertogenbosch, 2 février 2008
Mme. J. Gilad Directeur des Achats
16
Consignes de sécurité :
ATTE NTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRI R
Afi n de réduire les risques de chocs électriques, ce produit ne doit être ouvert QUE par un technicien qualifi é agréé en cas de réparation. Débranchez l'appareil du secteur et des
autres équipements en cas de problème. N'exposez jamais l'appareil à l'eau ou à l'humidité.
Entretien :
Nettoyer uniquement avec un chiffon sec. N'utilisez pas de solvants ou de produits abrasifs.
Garantie :
Aucune garantie ou responsabilité ne sera acceptée en cas de modifi cation et/ou de transformation du produit ou en cas de dommages provoqués par une utilisation incorrecte de l'appareil.
Généralités :
Le design et les caractéristiques techniques sont sujets à modifi cation sans notifi cation préalable. Tous les logos de marques et noms de produits sont des marques déposées ou immatriculées dont leurs détenteurs sont les propriétaires et sont donc reconnus comme telles dans ce document.
Attention :
Ce symbole fi gure sur l'appareil. Il signifi e que les produits électriques et électroniques ne doivent pas être jetés avec les déchets domestiques. Le système de collecte est différent pour ce genre de produits.
Copyright ©
17
NEDERLANDS
Introductie:
De HDMI-switch geeft high defi nition video (in diverse resoluties tot 1080p) en digitale audio van diverse bronnen door aan een beeldscherm. Alle ingangen maken het mogelijk om simultaan high defi nition video zoals satellietsystemen en HD DVD-spelers weer te geven. De uitgang stuurt de high defi nition audio/video signalen door naar een high defi nition scherm. Schakelen doet u met de IR-afstandsbediening welke is bijgeleverd met het apparaat, of met de selectietoets op de switch.
Eigenschappen:
• Ondersteunt HDMI1.3b
• Ondersteunt 12-bit deep colour
• 24K vergulde contactbussen
• Hoge prestaties tot 2.5 GBps
• Schakelt eenvoudig tussen de diverse HDMI-bronnen
• Zorgt voor prachtig hoge resolutie video, scherpe HDTV-resoluties tot 1080p, 2k en computerresoluties tot 1920 x 1200 worden gemakkelijk behaald
• Los bijgeleverde IR-afstandsbediening
• HDMI-weergave
• HDCP-weergave
Specifi caties:
Signaal ingang/uitgang
Ingang Videosignaal 0.5-1.0 V p-p Ingang DDC-signaal 5 V p-p (TTL) Maximale Single Link Range 1920X1200, 1080p Video-uitgang: HDMI 1.3b + HDCP 1.0/1.1
Ondersteunde videosignalen
VGA 640x480, 800x600, 1024x768, 1920x1200 DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
Digitaal signaal I/O
HDMI-ondersteunend HDMI 1.3b
Gebruiksfrequentie
Videoversterker bandbreedte 2.5 GBps/250 MHz Frequentie tot 250 MHz
Resoluties (HDTV)
Interlaced (50&60Hz) 480i, 576i, 1080i Progressive (50&60Hz) 480p, 576p, 720p, 1080p
Omgeving
Gebruikstemperatuur 0 °C tot +70 °C Gebruiksluchtvochtigheid 10% tot 85 % RH (geen condens) Opslagtemperatuur -10°C tot +80°C Opslagluchtvochtigheid 5% tot 90 % RH (geen condens)
Vermogen
Externe voeding 5 volt gelijkstroom 2A
Goedgekeurde regelgeving
Switch FCC, CE, UL Voeding UL, CE, FCC
Loading...
+ 39 hidden pages