Page 1
Version
Date
1.8
June/18/2021
V4 Universal Print Driver
System Administrator’s Guide
MFP System Control Development Division
R&D Headquarters Business Technologies
KONICA MINOLTA, INC.
Page 2
Revision History
Version
Date
Modified Contents
Description
1.0
Jan/17/2017
Initial version
Released
edition
1.1
Mar/23/2018
Corrected target version to Ver1.1
release version
2.2. V4 UPD Components
2.3. Supported Models
3.2.4. Installation in Point and Print
environment
4.1. Printing Preferences UI
4.2. Device Settings UI
5.3. Editing My Tab
5.4. Adding Favorite Setting
5.5. Editing Favorite Setting
7.1. List of support functions of
each model
Released
edition
1.2
May/18/2018
3.2.4. Installation in Point and Print
environment
Released
edition
1.3
Jun/6/2018
7.1. List of support functions of
each model
Released
edition
1.4
Dec/12/2018
7.1. List of support functions of
each model
6. Frequently Asked Questions
2.3. Supported Models
2.1. System requirements
Target Driver Version
Released
edition
1.5
Jan/30/2019
Trademark Credits
7.1. List of support functions of
each model
5.6 Customize by Administrators
Released
edition
1.6
Sep/9/2019
7.1. List of support functions of
each model
2.3. Supported Models
Target Driver Version
Released
edition
KONICA MINOLTA, INC.
2 / 87
Page 3
1.7
Jan/31/2020
7.1. List of support functions of
each model
2.3. Supported Models
Target Driver Version
Released
edition
1.8
Jun/18/2021
Target Driver Version
1. Introduction
3.1 Summary
Released
edition
Copyright
Copyright(c) 2016 KONICA MINOLTA, INC.
Trademark Credits
KONICA MINOLTA, INC.
PCL is a trademark of Hewlett-Packard Company.
Microsoft, Windows, Windows Server 2012, Windows Server2016, Windows Server2019,
Windows 8.1, and Windows 10 are U.S. registered trademarks of Microsoft Corporation.
Target Driver Version
The information in this document applies to the following versions of KONICA MINOLTA
V4 Universal Print Drivers.
KONICA MINOLTA Universal V4 PCL Version 2.0
3 / 87
Page 4
KONICA MINOLTA, INC.
Index
1. Introduction .......................................................................................................................... 6
2. Software Description ............................................................................................................ 7
2.1. System requirements .................................................................................................... 7
2.2. V4 UPD Components .................................................................................................... 7
2.3. Supported Models ......................................................................................................... 8
3. Installing, Uninstalling ...................................................................................................... 12
3.1. Summary ..................................................................................................................... 12
3.2. Install .......................................................................................................................... 12
3.2.1. Installing in “Network Search” by using the Included Installer ..................... 12
3.2.2. Installing in “Network Search” by using the Included Installer ..................... 16
3.2.3. Manual Installation ............................................................................................ 19
3.2.4. Installation in Point and Print environment .................................................... 27
3.2.5. Installation of Windows Store Device App ........................................................ 39
3.3. Uninstallation ............................................................................................................. 40
3.3.1. If You Installed the Software Using the Included Installer ............................. 40
3.3.2. Manual Uninstallation ....................................................................................... 43
3.3.3. Uninstallation in Point and Print environment ............................................... 43
3.3.4. Uninstallation of Windows Store Device App.................................................... 44
4. V4 Universal Print Driver’s UI .......................................................................................... 45
4.1. Printing Preferences UI ............................................................................................. 45
4.2. Device Settings UI ...................................................................................................... 49
4.3. Start Experience UI .................................................................................................... 51
5. Using V4 Universal Print Driver ....................................................................................... 52
5.1. Changing the model .................................................................................................... 52
5.2. Changing the display language ................................................................................. 55
5.3. Editing My Tab ........................................................................................................... 57
5.3.1. Adding My Tab .................................................................................................... 58
5.3.2. Deleting My Tab .................................................................................................. 62
5.3.3. Moving My Tab .................................................................................................... 62
5.4. Adding Favorite Setting ............................................................................................. 63
5.5. Editing Favorite Setting............................................................................................. 64
5.5.1. Deleting Favorite Setting ................................................................................... 66
5.5.2. Moving Favorite Setting ..................................................................................... 67
5.5.3. Editing Favorite Print Setting ........................................................................... 67
4 / 87
Page 5
KONICA MINOLTA, INC.
5.5.4. Edit Favorite Setting .......................................................................................... 69
5.6. Administrator Customization .................................................................................... 71
5.6.1. Print setting of customization target ................................................................. 71
5.6.2. Setting method .................................................................................................... 72
5.6.3. Export and import the setting of Administrator Customization ..................... 76
6. Frequently Asked Questions .............................................................................................. 78
7. Appendix ............................................................................................................................. 79
7.1. List of support functions of each model ..................................................................... 79
5 / 87
Page 6
KONICA MINOLTA, INC.
1. Introduction
KONICA MINOLTA V4 Universal Print Driver supports the new printing system V4
architecture that is available from Windows 8.
User Benefits
UI suitable for touch operation
KONICA MINOLTA V4 Universal Print Driver has a new UI that supports touch
operation. It solves the problem that it is hard to operate when using a conventional
driver with a tablet PC.
Windows Store Apps support
If you use a conventional driver with an OS of Windows 8 or later, the Microsoft
Standard UI will be displayed on the Printing Preference when printing from the
Windows Store Apps, and only the limited print setting can be used. The KONICA
MINOLTA V4 Universal Print Driver supports Windows Store Apps, so you can use
almost the same functions as desktop application printing.
6 / 87
Page 7
KONICA MINOLTA, INC.
OS
Printer Extension Windows Store Device App
UPD Core
V4 Universal Print Driver
2. Software Description
2.1. System requirements
KONICA MINOLTA V4 Universal Print Driver supports the following OS versions.
Windows
Windows 8.1
Windows 10
Windows Server 2012 R2
Windows Server 2016
Windows Server 2019
2.2. V4 UPD Components
KONICA MINOLTA V4 Universal Print Driver consists of three main types of component:
UPD Core, Printer Extension (PE), and Windows Store Device App (WSDA). UPD Core is
the core module of V4 UPD, and provides main functionality such as printing. Printer
Extension is an application that generates the Printing Preferences screen when printing
from desktop applications. It is provided in combination with UPD Core. Windows Store
Device App is an application that mostly generates the Printing Preferences screen when
printing from Windows Store Apps. It will be distributed via the Windows Store.
Figure 2.2-1 V4 UPD Components
7 / 87
Page 8
A3 Color
bizhub C658
bizhub C558
bizhub C458
bizhub C368
bizhub C258
bizhub C308
bizhub C287
bizhub C227
bizhub C266
bizhub C226
bizhub C754(e)
bizhub C654(e)
bizhub C554(e)
bizhub C454(e)
bizhub C364(e)
bizhub C284(e)
bizhub C224(e)
bizhub C759
bizhub C659
Workplace Hub
bizhub C281
bizhub C221
bizhub C221s
bizhub C360i
bizhub C300i
bizhub C250i
bizhub C650i
bizhub C550i
bizhub C450i
bizhub C287i
KONICA MINOLTA, INC.
2.3. Supported Models
The table below lists the KONICA MINOLTA products supported by V4 Universal Print Driver.
Supporting functions of V4 Universal Print Driver are limited compared to normal drivers. See
Error! Reference source not found. Error! Reference source not found. for details about
supporting functions.
8 / 87
Page 9
bizhub C257i
bizhub C227i
bizhub C286i
bizhub C266i
bizhub C226i
bizhub C750i
A3 BW
bizhub 958
bizhub 808
bizhub 758
bizhub 558
bizhub 458
bizhub 367
bizhub 287
bizhub 227
bizhub 754(e)
bizhub 654(e)
bizhub 554e
bizhub 454e
bizhub 364e
bizhub 284e
bizhub 224e
bizhub 368
bizhub 308
bizhub 658e
bizhub 558e
bizhub 458e
bizhub 368e
bizhub 308e
bizhub 306i
bizhub 266i
bizhub 246i
bizhub 226i
bizhub 750i
bizhub 650i
KONICA MINOLTA, INC.
9 / 87
Page 10
KONICA MINOLTA, INC.
bizhub 550i
bizhub 450i
bizhub 360i
bizhub 300i
A4 Color
bizhub C3851
bizhub C3351
bizhub C3851FS
bizhub C3350
bizhub C3850
bizhub C3850FS
bizhub C3100P
bizhub C3110
bizhub C4050i
bizhub C3350i
bizhub C4000i
bizhub C3300i
bizhub C3320i
A4 BW
bizhub 4750
bizhub 4050
bizhub 4752
bizhub 4052
bizhub 4700P
bizhub 4000P
bizhub 3300P
bizhub 3301P
bizhub 4020
bizhub 3320
bizhub 4702P
bizhub 4402P
bizhub 3602P
bizhub 4422
bizhub 3622
bizhub 5020i
bizhub 5000i
10 / 87
Page 11
KONICA MINOLTA, INC.
bizhub 4020i
bizhub 4000i
bizhub 4750i
bizhub 4050i
bizhub 4700i
Baseline *1
Table 2-1 KONICA MINOLTA products supported by V4 Universal Print Driver
*1: This is a common model. If a driver does not support by V4 Universal Printer Driver or a
third-party device is selected, it is also possible to send print data. However, Konica Minolta
cannot guarantee the printing results.
11 / 87
Page 12
KONICA MINOLTA, INC.
3. Installing, Uninstalling
3.1. Summary
By using the included installer/uninstaller (*1), you can easily install or uninstall the
KONICA MINOLTA V4 Universal Print Driver.
*1: Execute "Setup.exe" in the case of x86 environment, "Setup64.exe" in the case of x64
environment, and "SetupARM64.exe" in the case of ARM64 environment.
3.2. Install
3.2.1. Installing in “Network Search” by using the Included Installer
1. Execute “Setup.exe”.
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.
Figure 3.2-1 Software End User License Agreement dialog box
12 / 87
Page 13
3. Click “Install (Network Search)”.
KONICA MINOLTA, INC.
Figure 3.2-2 Function Selection dialog box
4. Starting search devices on the network. Click “Cancel” if you want to stop searching.
Figure 3.2-3 Searching dialog box
13 / 87
Page 14
5. Devices found in the search will be displayed in a list.
KONICA MINOLTA, INC.
Figure 3.2-4 Device List dialog box
6. Settings such as Print Queue Name and Printer Driver Name will be displayed by
clicking “Detail”. Check the device you want to install and click “Next”.
Figure 3.2-5 Device List dialog box (Detail)
14 / 87
Page 15
KONICA MINOLTA, INC.
7. Installation Confirmation dialog box is displayed. Click “Install” to start installing.
Figure 3.2-6 Installation Confirmation dialog box
8. Progress of the installation is displayed.
Figure 3.2-7 Installation Process dialog box
15 / 87
Page 16
9. The installation is complete.
KONICA MINOLTA, INC.
Figure 3.2-8 Installation Complete dialog box
3.2.2. Installing in “Network Search” by using the Included Installer
1. Execute “Setup.exe”.
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.
Figure 3.2-9 Software End User License Agreement dialog box
16 / 87
Page 17
3. Click “Install (Manual Setting)”.
KONICA MINOLTA, INC.
Figure 3.2-10 Function Selection dialog box
4. Install (Manual Setting) dialog box is displayed. Click “Add to list” at the bottom left to
add a row to the list.
Figure 3.2-11 Install (Manual Setting) dialog box
17 / 87
Page 18
KONICA MINOLTA, INC.
5. Select the added row, and enter information such as Print Queue Name and Port on the
right side of the setting dialog box. Make sure that you have checked on the beginning
of the row you want to add the print queue and click “Next”.
Figure 3.2-12 Install (Manual Setting) dialog box (continue)
6. The following procedure is same as procedure 7 and later of 3.2.1 Installing in “Network
Search” by using the Included Installer.
18 / 87
Page 19
KONICA MINOLTA, INC.
3.2.3. Manual Installation
Install the driver using the Windows “Add Printer” wizard.
1. Open the “Devices and Printers” folder and click the “Add a printer” button.
2. The Add Printer wizard starts. Click “The printer that I want isn’t listed”.
Figure 3.2-13 Searching for devices
3. If a port already exists, select “Add a local printer of network printer with manual
settings” and then select an existing port. If not, select “Add a printer using a TCP/IP
address or hostname” and click “Next”.
Figure 3.2-14 Find a printer by other options
19 / 87
Page 20
KONICA MINOLTA, INC.
4. Enter IP in the “Host name or IP address” field and press “Next”.
Figure 3.2-15 Type a printer hostname of IP address
5. Click “Have Disk”.
Figure 3.2-16 Printer Driver Selection
20 / 87
Page 21
KONICA MINOLTA, INC.
6. Click “Browse”.
Figure 3.2-17 Install From Disk
7. Access the driver storage location, select “KOBxxK_01”, and click “Open”.
8. Click “OK”.
Figure 3.2-18 Locate File
Figure 3.2-19 Install From Disk
21 / 87
Page 22
KONICA MINOLTA, INC.
9. Confirm that “KONICA MINOLTA Universal V4 PCL” is selected and click “Next”.
Figure 3.2-20 Printer Driver Selection
10. You can rename the printer name. If not, just click “Next”.
Figure 3.2-21 Type a printer name
22 / 87
Page 23
11. Installing printer.
KONICA MINOLTA, INC.
Figure 3.2-22 Installing printer
12. The printer sharing setting screen will be displayed. If you want to share it, enter
sharing information, if not, select "Do not share this printer" and click “Next”.
Figure 3.2-23 Printer Sharing
23 / 87
Page 24
KONICA MINOLTA, INC.
13. The installation is complete. Click “Finish” to close the dialog box.
Figure 3.2-24 Installation complete
If you install KONICA MINOLTA V4 Universal Print Driver using this method, the model
will not be selected automatically. So you also need to do the following procedure to select a
model.
14. Right click the added printer icon from the “Devices and Printers” folder to open the
Printing Preferences.
15. Click the following message that displayed on the Printing Preferences.
“Please select model in [Devices and Printers]”.
Figure 3.2-25 Printing Preferences
24 / 87
Page 25
KONICA MINOLTA, INC.
16. The Confirmation dialog box will be displayed. If you want to save the printing settings,
click “Yes”. If not, click “No”.
Figure 3.2-26 Confirmation
17. Select a model in Model Selection dialog box and Click “OK”. If you want to acquire the
model automatically, Click “Auto”.
Figure 3.2-27 Model Selection
25 / 87
Page 26
KONICA MINOLTA, INC.
18. The Device Settings dialog box will be displayed. You can make settings for the device.
Otherwise, click “OK” to close it.
Figure 3.2-28 Device Settings
26 / 87
Page 27
KONICA MINOLTA, INC.
3.2.4. Installation in Point and Print environment
In V4UPD, when installing a shared printer in the Point and Print environment, it is
necessary to install the driver on the client PC after installing the shared printer.
First, install the shared printer.
1. Open the “Devices and Printers” and click the “Add a printer” button.
2. The Add Printer wizard starts. Click “The printer that I want isn’t listed”.
Figure 3.2-29 Searching for devices
3. In the “Find a printer by other options” window, select “Select a shared printer by
name" radio button and enter the shared printer path. Alternatively, you can also click
on [Browse…] button to search the shared printer from the network.
Figure 3.2-30-1 Find a printer by other options
27 / 87
Page 28
KONICA MINOLTA, INC.
4. Clicking on [Browse...] button displays a list of selectable computers. Select the network
printer or enter the printer name and click [select].
Figure 3.2-31-2 Select network Printer
5. If network authentication is required, [Enter network credentials] window is displayed.
On this window, enter the administrator account and password. Also make sure to
check the "Remember my credentials" checkbox.
If the checkbox is not checked, your credentials will not be stored and correct driver
installation and operation will not be possible.
After entering and checking, click [OK].
Figure 3.2-32-3 Enter network credentials
28 / 87
Page 29
KONICA MINOLTA, INC.
If you click [OK] and continue the installation without checking the "Remember my
credentials" checkbox, please remove and reinstall the print queue. Alternatively, use
the Credential Manager utility to register the credential information of the server.
6. Return to the “Find a printer by other options" window and click [Next].
Figure 3.2-33-4 Find a printer by other options
7. Connecting to the shared printer.
Figure 3.2-34 Connecting
29 / 87
Page 30
KONICA MINOLTA, INC.
8. If added successfully, the following screen is displayed. Click [Next].
Figure 3.2-35 Added successfully
9. Click “Finish” to close the dialog box.
Figure 3.2-36 Finish to install
Next we will install the driver on the client PC. There are two ways.
30 / 87
Page 31
KONICA MINOLTA, INC.
Method1: Installing by using the Included Installer
1. Execute "Setup.exe".
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.
Figure 3.2-37 Software End User License Agreement dialog box
3. Click “Standard Update”
Figure 3.2-38 Function Selection dialog box
31 / 87
Page 32
KONICA MINOLTA, INC.
4. The print queue name of the shared printer that you installed is displayed in the Print
Queue Name. Click “Next”.
Figure 3.2-39 Update Target Confirmation dialog box
5. Confirm the print queue name and click “Update” to install the printer driver.
Figure 3.2-40 Update Target Confirmation dialog box (continue)
32 / 87
Page 33
6. Staring update.
KONICA MINOLTA, INC.
Figure 3.2-41 Updating Process dialog box
7. The update is complete. Click “OK” to close the dialog.
Figure 3.2-42 Update Complete dialog box
33 / 87
Page 34
KONICA MINOLTA, INC.
Method2: Manual Installation
1. Open the “Devices and Printers” folder and click the “Print Server Properties” button.
Click the “Add” button in “Drivers” tab of Print Server Properties dialog box.
2. Click “Next”.
Figure 3.2-43 Print Server Properties
Figure 3.2-44 Add Printer Driver Wizard
34 / 87
Page 35
3. Select the Processor and click “Next”.
KONICA MINOLTA, INC.
4. Click “Have Disk”.
Figure 3.2-45 Processor Selection
Figure 3.2-46 Printer Driver Selection
35 / 87
Page 36
KONICA MINOLTA, INC.
5. Click “Browse”.
Figure 3.2-47 Install From Disk
6. Access the driver storage location, select “KOBxxK_01”, and click “Open”.
Figure 3.2-48 Locate File
36 / 87
Page 37
KONICA MINOLTA, INC.
7. Click “OK”.
Figure 3.2-49 Install From Disk
8. Confirm that “KONICA MINOLTA Universal V4 PCL” is selected and click “Next”.
Figure 3.2-50 Printer Driver Selection
37 / 87
Page 38
KONICA MINOLTA, INC.
9. The installation is complete. Click “Finish” to close the dialog box.
Figure 3.2-51 Add Complete
10. Click “OK” to close the Print Server Properties dialog box.
Figure 3.2-52 Print Server Properties
38 / 87
Page 39
KONICA MINOLTA, INC.
3.2.5. Installation of Windows Store Device App
Windows Store Device App, which is the Printing Preferences screen for the Windows Store
Apps, will be downloaded from the Windows Store automatically and installed after
installing the KONICA MINOLTA V4 Universal Print Driver. After installation is completed,
you can check KONICA MINOLTA Print Experience from the Start Menu of Windows.
Figure 3.2-53 Start Menu of Windows 10
If the Print Experience do not download automatically, check the followings.
You are connecting to the Internet.
You have access to the Windows store.
39 / 87
Page 40
KONICA MINOLTA, INC.
3.3. Uninstallation
3.3.1. If You Installed the Software Using the Included Installer
If you have installed UPD using the included installer, then the uninstaller is also installed
on your operating system. Use that to uninstall the software.
1. Use the following method to start uninstaller.
Select “Control Panel” -> “Programs and Features” and double click “KONICA
MINOLTA Universal V4 PCL”.
2. Print Queue and Printer Driver, which can be deleted will be displayed. Check on what
you want to delete and click “Next”.
Figure 3.3-1 Uninstall target selection dialog box
40 / 87
Page 41
KONICA MINOLTA, INC.
3. If you selected to delete Printer Driver, all Print Queues that use the Printer Driver will
be deleted.
Figure 3.3-2 Uninstall impact notification dialog box
4. The confirmation dialog of uninstallation will be displayed.
Figure 3.3-3 Uninstallation Details Confirmation dialog box
41 / 87
Page 42
5. Progress of the Uninstallation will be displayed.
KONICA MINOLTA, INC.
Figure 3.3-4 Uninstalling dialog box
6. The uninstallation is complete.
Figure 3.3-5 Uninstallation Complete dialog box
42 / 87
Page 43
KONICA MINOLTA, INC.
3.3.2. Manual Uninstallation
If you installed UPD manually, you must uninstall it manually by following the procedure
below.
1. Delete all print queues using the driver of “KONICA MINOLTA Universal V4 PCL”
from the “Devices and Printers” folder.
2. Delete “KONICA MINOLTA Universal V4 PCL” from the “Drivers” tab of the “Print
Server Properties” dialog box.
3.3.3. Uninstallation in Point and Print environment
When using Point and Print, the driver needs to be removed also from the client side. Follow
the steps below to remove the driver.
1. Open the “Devices and Printers” folder on client PC.
2. Delete the print queue of the shared V4 UPD.
3. Delete “KONICA MINOLTA Universal V4 PCL” from the “Drivers” tab of the “Print
Server Properties” dialog box.
43 / 87
Page 44
KONICA MINOLTA, INC.
3.3.4. Uninstallation of Windows Store Device App
The method of uninstalling the Windows Store Device App is the same as other Windows
Store Apps. On the Start Menu of Windows, find “KONICA MINOLTA Print Experience” and
right click. Select “Uninstall” from the displayed menu.
Figure 3.3-6 Start Menu of Windows 10
44 / 87
Page 45
KONICA MINOLTA, INC.
4. V4 Universal Print Driver’s UI
4.1. Printing Preferences UI
KONICA MINOLTA V4 Universal Print Driver has a new UI that supports touch operation.
There are two screens: the Printing Preferences for the desktop applications and the
Printing Preferences for the Windows Store Apps.
Printing Preferences for the desktop applications
The Printing Preferences for the desktop applications consists of the following areas.
Figure 4.1-1 Printing Preferences for the desktop applications – My Tab
45 / 87
Page 46
The descriptions of each area are described below.
Area
Description
Paper View / Text
View
You can switch to two screens: “Paper View” and “Text View”.
Favorite Setting
It is the same function as the conventional favorite setting.
My Tab / All Tab
・You can switch to two screens: “My Tab” and “All Tab”.
・”My Tab” is the same function as the conventional My Tab.
・On the "All Tab" screen, you can set all print settings.
Splitter
You can adjust the height of “Paper View / Text View” and
“Favorite Setting”.
Restore Default
Setting
Change all settings except the following items to default values.
・Settings of child dialog.
・Items and layout of Favorite Settings.
・Items and layout of My Tab.
Model Selection
Message
・A warning message will be displayed if the model is not selected
or if the selected model is incorrect.
・The Model Selection Dialog Box will be displayed if click the
message.
KONICA MINOLTA, INC.
Table 4-1 Descriptions of the Printing Preferences for the desktop applications
The following screen will be displayed by clicking “All Tab”.
In “All Tab”, it is grouped into "Basic", "Layout", "Finish", "Cover Mode ",
"Stamp/Composition", and “Quality" and folded.
By clicking each group name, the setting value will be displayed.
Figure 4.1-2 Printing Preferences for the desktop applications – All Tab
46 / 87
Page 47
KONICA MINOLTA, INC.
Printing Preferences for the Windows Store Apps
The Printing Preferences for the Windows Store Apps consists of the following areas.
Figure 4.1-3 Printing Preferences for the Windows Store Apps – My Tab
Basically it is same as the Printing Preferences for the desktop applications. But the
following functions are not supported.
Text View
Splitter
Mode Selection Message
47 / 87
Page 48
The following screen will be displayed by clicking “All Tab”.
KONICA MINOLTA, INC.
Figure 4.1-4 Printing Preferences for the Windows Store Apps – All Tab
48 / 87
Page 49
KONICA MINOLTA, INC.
4.2. Device Settings UI
You can select model and make settings for device in KONICA MINOLTA V4 Universal Print
Driver.
Open the Device Settings dialog box from the Printing Preferences for the desktop
applications by the following procedures.
1. Open the Printing Preferences for the desktop applications.
2. Click “All Tab”.
Figure 4.2-1 Printing Preferences for the desktop applications – My Tab
3. Click “Device Settings” button in the “Other” group.
Figure 4.2-2 Printing Preferences for the desktop applications – All Tab
49 / 87
Page 50
KONICA MINOLTA, INC.
4. Confirmation dialog box will be displayed. Select “Yes” to save the current print settings,
or “No” if you do not want to save them.
Figure 4.2-3 Confirmation
5. Device Settings dialog box is displayed.
Figure 4.2-4 Device Settings
50 / 87
Page 51
KONICA MINOLTA, INC.
Parameter
Description
Model
Display the model name selected.
Select Model
Pop up the Model Selection dialog box.
Device Option
Displayed the information of device options.
Option
Display the options that can be set.
Value
Display the set value of each option.
Obtain Device Information
Obtain information from the device and apply it to “Device
Option” and “Encryption Passphrase”.
Encryption Passphrase
Specify whether to set a user-defined encryption
Passphrase.
Obtain Settings
Pop up the Obtain Settings dialog box.
Administrator Customize
Pop up the Admin Configuration dialog box.
The descriptions of the settings in Device Settings are described below.
Table 4-2 Descriptions of the Device Settings dialog box
4.3. Start Experience UI
The following screen will be displayed when open the KONICA MINOLTA Print Experience.
Figure 4.3-1 KONICA MINOLTA Print Experience screen
A list of printers using the KONICA MINOLTA V4 Universal Print Driver is displayed. If the
URL is displayed, printer information will be displayed from browser by clicking it.
51 / 87
Page 52
KONICA MINOLTA, INC.
5. Using V4 Universal Print Driver
5.1. Changing the model
In KONICA MINOLTA V4 Universal Print Driver, you can change the model to be used from
the driver UI.
1. Open the Printing Preferences for the desktop applications.
Figure 5.1-1 Printing Preferences for the desktop applications – My Tab
2. Click “Device Settings” button in the “Other” group of the “All Tab”.
Figure 5.1-2 Printing Preferences for the desktop applications – All Tab
52 / 87
Page 53
KONICA MINOLTA, INC.
3. Click the “Select Model” button in Device Settings dialog box.
Figure 5.1-3 Device Settings dialog box
4. Select a model in Model Selection dialog box and Click “OK”. If you want to acquire the
model automatically, Click “Auto”.
Figure 5.1-4 Model Selection dialog box
53 / 87
Page 54
KONICA MINOLTA, INC.
5. Click “OK” to close the Device Settings dialog box. The settings of the selected model
will be reflected when you open the Printing Preferences next time.
Figure 5.1-5 Device Settings dialog box
54 / 87
Page 55
KONICA MINOLTA, INC.
5.2. Changing the display language
In KONICA MINOLTA V4 Universal Print Driver, you can change the display language from
Printing Preferences.
Change the display language from Printing Preferences for the desktop applications
1. Open the Printing Preferences for the desktop applications.
Figure 5.2-1 Printing Preferences for the desktop applications – My Tab
2. Click “Language Setting” button in the “Other” group of the “All Tab”.
Figure 5.2-2 Printing Preferences for the desktop applications – All Tab
55 / 87
Page 56
KONICA MINOLTA, INC.
3. Set the display language on the Language Setting dialog box and click “OK” to close it.
Figure 5.2-3 Language Setting dialog box
4. Click “OK” to close the Printing Preferences. The display language will be changed
when you open the Printing Preferences next time.
Figure 5.2-4 Printing Preferences for the desktop applications – All Tab
Change the display language from Printing Preferences for the Windows Store Apps
The method of changing the displayed language in the Printing Preferences for the Windows
Store Apps is same as the Printing Preferences for the desktop applications
56 / 87
Page 57
KONICA MINOLTA, INC.
5.3. Editing My Tab
In KONICA MINOLTA V4 Universal Print Driver, you can edit My Tab screen and
customize it.
1. Open the Printing Preferences for the desktop applications and click the gear icon in
the upper right corner of the screen.
Figure 5.3-1 Printing Preferences for the desktop applications – My Tab
2. Entering the My Tab edit mode, you can add, delete, and change the items for your
favorite.
Figure 5.3-2 Edit My Tab
57 / 87
Page 58
KONICA MINOLTA, INC.
3. Click the gear icon again to save the edited content and end the edit mode of My Tab.
Figure 5.3-3 Edit My Tab
5.3.1. Adding My Tab
1. Entering the My Tab edit mode, click on the "+" icon in the upper right or click on "All
Tab" tab.
Figure 5.3-4 Printing Preferences for the desktop applications – My Tab
58 / 87
Page 59
KONICA MINOLTA, INC.
2. Move to the "All Tab" tab. The print settings, which have been added on My Tab are
shown to be gray.
Figure 5.3-5 Edit My Tab
The following two methods can add print settings to My Tab.
Method 1 Use the Add button to add
① Click the [☆] icon on the top right of the selected item in All Tab.
Figure 5.3-6 Edit My Tab
59 / 87
Page 60
KONICA MINOLTA, INC.
② The print settings that have been clicked will be added to the My Tab and then it will be
gray.
Figure 5.3-7 Edit My Tab
③ Click "My Tab" tab to confirm that the item have been added on the My Tab.
Figure 5.3-8 Edit My Tab
60 / 87
Page 61
Method 2 Drag and drop to add
① Drag the print setting you want to add.
KONICA MINOLTA, INC.
Figure 5.3-9 Edit My Tab
② Entering My Tab mode. Move the dragged item to the place as your like.
Figure 5.3-10 Edit My Tab
61 / 87
Page 62
KONICA MINOLTA, INC.
5.3.2. Deleting My Tab
1. Entering edit My Tab mode. Click the [×] icon of the selected item. Delete the selected
item from My Tab.
Figure 5.3-11 Edit My Tab
5.3.3. Moving My Tab
1. Entering edit My Tab mode. Drag the selected item in My Tab. Move the place of the
item left/right/up/down.
Figure 5.3-12 Edit My Tab
62 / 87
Page 63
KONICA MINOLTA, INC.
5.4. Adding Favorite Setting
According to the following steps, you can add the print settings into the Favorite.
1. Open the Printing Preferences for the desktop applications and make print settings.
2. Click the “+” icon in the Favorite Setting area.
Figure 5.4-1 Printing Preferences for the desktop applications –Favorite
3. The current printing settings have been added into the Favorite. The name and
comment are default and can be modified by clicking 2 times.
Figure 5.4-2 Add Favorite Setting
63 / 87
Page 64
KONICA MINOLTA, INC.
4. Click "OK" button on the print setting. After the screen is closed, the added Favorite
will be saved.
Figure 5.4-3 Printing Preferences for the desktop applications –Favorite
5.5. Editing Favorite Setting
1. Open the Printing Preferences for the desktop applications and click the gear icon in
the Favorite Setting area.
Figure 5.5-1 Printing Preferences for the desktop applications – My Tab
64 / 87
Page 65
KONICA MINOLTA, INC.
2. Entering the Favorite Setting edit mode, you can delete, edit print setting and change
configures.
Figure 5.5-2 Favorite Setting
3. Click the gear icon again to save the edited content and end the edit mode of the
Favorite Setting.
Figure 5.5-3 Favorite Setting
65 / 87
Page 66
KONICA MINOLTA, INC.
4. Click "OK" button on the print setting. After the screen is closed, the added Favorite
will be saved.
Figure 5.5-4 Favorite Setting
5.5.1. Deleting Favorite Setting
1. Entering edit Favorite Setting mode. Click the [×] icon of the selected Favorite. Delete
the selected Favorite from Favorite Setting.
Figure 5.5-5 Favorite Setting
66 / 87
Page 67
KONICA MINOLTA, INC.
5.5.2. Moving Favorite Setting
1. Entering edit Favorite Setting mode. Drag the Favorite to move, moving the Favorite
display position to the top / bottom.
Figure 5.5-6 Favorite Setting
5.5.3. Editing Favorite Print Setting
1. Entering the Favorite Setting edit mode, after selecting one of the Favorite, the printed
setting in the Favorite on the right side is reflected.
Figure 5.5-7 Printing Preferences for the desktop applications –Favorite
67 / 87
Page 68
KONICA MINOLTA, INC.
2. Select the favorite you want to edit, and if you have a print setting editing, the favorite
icon shows the frame in the edit.
※The preset favorite cannot be edited.
Figure 5.5-8 Favorite Setting
3. The edit information will be update by ending the Edit mode.
68 / 87
Page 69
KONICA MINOLTA, INC.
5.5.4. Edit Favorite Setting
1. Entering the Favorite Setting edit mode. Click the pencil icon in the Favorite Setting
screen.
Figure 5.5-9 Favorite Setting
2. Edit Favorite Setting dialog box is displayed.
Figure 5.5-10 Edit Favorite Setting
69 / 87
Page 70
KONICA MINOLTA, INC.
Parameter
Description
Favorite List
Display the saved favorite settings in list.
Import
Read the favorite settings information in a saved file and
add it to the Favorite Setting List.
Export
Save the favorite setting selected in the Favorite List as a
file.
Restore Preset Favorites
Restore all hidden preset favorites and display the favorite
settings in list.
Name
Enter the name of the selected item in the Favorite List
Comment
Enter the comment of the selected item in the Favorite
List
Sharing
Specify the sharing setting of the selected item in the
Favorite List
Restore Items
Set whether the information saved by the following
[Favorite] is reflected on the UI when Restore Items for
[Favorite]
Original Document Size,
Orientation
Set the items of [Document Size] [Orientation] in [Basic]
Copies
Set Copies of [Basic]
Watermark [Text List
Information]
Set [Watermark] list of Stamp/Composition.
Restore Common Settings
Set already sharing watermark.
※The state which display when watermark List
Information is on
Select All
Select the Restore items of Select All
The descriptions of the settings in Edit Favorite Setting dialog box are described below.
Figure 5.5-11 Descriptions of the Edit Favorite Setting dialog box
70 / 87
Page 71
KONICA MINOLTA, INC.
Item name
Setting value
Select Color
Auto Color
Gray Scale
Black + Red
Black + Green
Black + Blue
Black + Cyan
Black + Magenta
Black + Yellow
Black + Chinese Red
Print Type
1-Sided
2-Sided
Booklet
Output Method
Print
Store Job
Print and Hold
Secure Print
Save in User Box
Save in User Box/Print
Proof Print
ID & Print
Secure Print
Secure Print ID
Arbitrary value in the input range
Password
Arbitrary value in the input range
Save in User Box
File Name
Arbitrary value in the input range
User Box Number
Arbitrary value in the input range
User
Authentication
User
Public User
Recipient User
User Name
Use Windows Login ID
Edit User Name
5.6. Administrator Customization
KONICA MINOLTA Universal Print Driver supports the function that customize the print
settings by administrator. Default value of print setting can be changed or fixed by using
this function.
5.6.1. Print setting of customization target
71 / 87
Page 72
KONICA MINOLTA, INC.
Password
Arbitrary value in the input range
Server Setting
Server1~ Server20
MFP
Authentication
Enhanced Server
External Server
Device
Account Track
Department Name
Arbitrary value in the input range
Password
Arbitrary value in the input range
Import...
Export...
5.6.2. Setting method
Open the Admin Configuration dialog from the Printing Preferences for the desktop
applications by the following procedures.
1. Open the Printing Preferences for the desktop applications.
2. Click “All Tab” .
図 5.6-1 Printing Preferences for the desktop applications – All Tab
72 / 87
Page 73
KONICA MINOLTA, INC.
3. Click “Device Settings…” button in the “Other” group.
4. Confirmation dialog box will be displayed. Select “Yes” or “No”.
図 5.6-2 Confirmation
5. Device Settings dialog box is displayed. Click “Administrator Customize...”.
図 5.6-3 Device Settings dialog box
73 / 87
Page 74
KONICA MINOLTA, INC.
6. Admin Configuration dialog will be displayed. Select the method of customize print
settings in the left column. Select “Select default setting” if you want to specify the
default value, or select “Lock setting” if you want to fix the value.
図 5.6-2 Admin Configuration dialog box 1
7. Next, select the value of the feature in the right column.
図 5.6-5 Admin Configuration dialog box 2
74 / 87
Page 75
KONICA MINOLTA, INC.
8. In the above example, Gray Scale has been selected to the default value of Select Color,
and Print Type has been locked to 1-Sided. Printing Preferences are as follows.
図 5.6-6 Printing Preferences for the desktop applications
図 5.6-7 Printing Preferences for the Windows Store Apps
75 / 87
Page 76
KONICA MINOLTA, INC.
5.6.3. Export and import the setting of Administrator Customization
It is possible to export the settings of Administrator Customization to file (.KAC file) and
import to another Print Queue.
Method of export
1. Click “Export...”.
図 5.6-8 Export Selection
2. Specify location and file name, and then click “Save”.
図 5.6-9 Export Destination Selection
76 / 87
Page 77
Method of import
1. Click “Import...”.
KONICA MINOLTA, INC.
図 5.6-10 Import selection
3. Select the .KAC to import and then click “Open”.
図 5.6-11 Import Destination Selection
77 / 87
Page 78
6. Frequently Asked Questions
Question
Answer
Is the Citrix environment
Supported?
No. KONICA MINOLTA V4 Universal Print Driver do not
support Citrix environment
Can I Use My Tab function?
Yes. My Tab function is available in KONICA MINOLTA
V4 Universal Print Driver.
Can I update from UPD
Ver.3.x
No. KONICA MINOLTA V4 Universal Print Driver is a
driver with a new architecture, which is different from
UPD Ver.3.x. So KONICA MINOLTA V4 Universal Print
Driver cannot be updated from UPD Ver.3.x.
Is the Windows 10 S Mode
Supported?
Yes, KONICA MINOLTA V4 Universal Print Driver Ver.1.2
supports the Windows 10 S Mode. However, you cannot
install (steps 3.2.1, 3.2.2) and uninstall (steps 3.3.1, 3.3.2)
with the installer. Please install and uninstall the driver
manually.
KONICA MINOLTA, INC.
Table 6-1 FAQ
78 / 87
Page 79
7. Appendix
Function (1/9)
Baseline
A3 Color
C658/
C558/
C458
C368/
C258/
C308
C287/
C227
C266/
C226
C754(e)/
C654(e)
C554(e)/
C454(e)/
C364(e)/
C284(e)/
C224(e)
C281/
C221/
C221s
C759/
C659
C360i/
C300i/
C250i
C650i/
C550i/
C450i
C287i/
C257i/
C227i
C286i/
C266i/
C226i
C750i
Workplace
Hub
Basic
Original Orientation
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Original Size
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Paper Size
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Zoom ○ ○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Paper Tray
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Paper Type
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Copies
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Collate
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Offset ○ ○ ○ ○ ○ ○
○
○ × ○ ○ ○ ○ ○
○
Output Method
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Print ○ ○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Store Job
×
× × × × ×
×
× × × × × × ×
×
Print and Hold
×
× × × × ×
×
× × × × × × ×
×
Secure Print
×
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○ *1
Save in User Box
×
○ ○ ○ ○ ×
○
○ × ○ ○ ○ ○ ○
×
Save in User Box/Print
×
○ ○ ○ ○ ×
○
○ × ○ ○ ○ ○ ○
×
Proof Print
○
○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
×
ID& Print
×
○ ○ ○ ○ ×
○
○ × ○
○ ○ ○
○
○ *1
*1: WSD Protocol、×
7.1. List of support functions of each model
KONICA MINOLTA, INC.
Table 7-1 List of support functions of each model (1/9)
79 / 87
Page 80
KONICA MINOLTA, INC.
Function (2/9)
Baseline
A3 Color
C658/
C558/
C458
C368/
C258/
C308
C287/
C227
C266/
C226
C754(e)/
C654(e)
C554(e)/
C454(e)/
C364(e)/
C284(e)/
C224(e)
C281/
C221/
C221s
C759/
C659
C360i/
C300i/
C250i
C650i/
C550i/
C450i
C287i/
C257i/
C227i
C286i/
C266i/
C226i
C750i
Workplace
Hub
Authentication/Account Track
× ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
User Authentication
× ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Enhanced Server
× ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
External Server
× ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
×
Device
× ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
×
Account Track
× ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
×
Layout
Combination (N in 1)
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Poster
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Rotate 180
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Skip Blank Pages
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Print Type
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
1-Sided
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
2-Sided
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Booklet (Device)
○ ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
Booklet (Driver)
× × × × × × ×
○ × × × × × ×
×
Binding Position
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Binding Margin
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Finish
Staple ○ ○ ○ ○ × ○
○
× ○ ○ ○ ○ × ○
○
Center Staple and Fold
○ ○ ○ ○ × ○ ○
× ○ ○ ○ ○ × ○
×
Punch ○ ○ ○ ○ × ○
○
× ○ ○ ○ ○ × ○
○
Fold ○ ○ ○ ○ × ○
○
× ○ ○ ○ ○ × ○
×
Output Tray
○ ○ ○ ○ × ○ ○
× ○ ○ ○ ○ × ○
○
Paper Arrangement
○ ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
Prioritize Arranging Papers
○ ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
Prioritize Productivity
○ ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
Table 7-2 List of support functions of each model (2/9)
80 / 87
Page 81
KONICA MINOLTA, INC.
Function (3/9)
Baseline
A3 Color
C658/
C558/
C458
C368/
C258/
C308
C287/
C227
C266/
C226
C754(e)/
C654(e)
C554(e)/
C454(e)/
C364(e)/
C284(e)/
C224(e)
C281/
C221/
C221s
C759/
C659
C360i/
C300i/
C250i
C650i/
C550i/
C450i
C287i/
C257i/
C227i
C286i/
C266i/
C226i
C750i
Workplace
Hub
Cover Mode
Front Cover
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Back Cover
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Front Cover from Post Inserter
○ ○ × × × ○ ○
× ○ × ○ × × ○
×
Back Cover from Post Inserter
○ ○ × × × ○ ○
× ○ × ○ × × ○
×
Transparency Interleave
○ ○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○ ○
○
Stamp/Composition
Watermark
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Quality
Select Color
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Auto Color
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Gray Scale
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
2 Color
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Resolution
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Toner Save
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Other
Quiet Mode
× × × × × × ×
× × × × × × ×
×
Improve Print Output
× × × × × × ×
× × × × × × ×
×
Device Settings
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
Language Setting
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○
About ○ ○ ○ ○ ○ ○
○
○ ○ ○ ○ ○ ○ ○
○
Table 7-1 List of support functions of each model (3/9)
81 / 87
Page 82
KONICA MINOLTA, INC.
Function (4/9)
A3 BW
958/
808/
758
558/
458
367/
287/
227
754(e)/
654(e)
554e/
454e/
364e/
284e/
224e
368/
308
658e/
558e/
458e/
368e/
308e
306i
266i
246i
226i
750i
650i/
550i/
450i/
360i/
300i
Basic
Original Orientation
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Original Size
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Paper Size
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Zoom ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Tray
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Paper Type
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Copies ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Collate ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Offset ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Output Method
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Store Job
× × × × × × × × ×
×
Print and Hold
× × × × × × × × ×
×
Secure Print
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Save in User Box
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Save in User Box/Print
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Proof Print
○ ○ ○ ○ ○ ○ ○ ○ ○
○
ID& Print
○ ○ ○
○ ○ ○ ○ ○ ○ ○
*1: WSD Protocol、×
Table 7-4 List of support functions of each model (4/9)
82 / 87
Page 83
KONICA MINOLTA, INC.
Function (5/9)
A3 BW
958/
808/
758
558/
458
367/
287/
227
754(e)/
654(e)
554e/
454e/
364e/
284e/
224e
368/
308
658e/
558e/
458e/
368e/
308e
306i
266i
246i
226i
750i
650i/
550i/
450i/
360i/
300i
Authentication/Account Track
○ ○ ○ ○ ○ ○ ○ ○ ○
○
User Authentication
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Enhanced Server
○ ○ ○ ○ ○ ○ ○ ○ ○
○
External Server
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Device ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Account Track
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Layout
Combination (N in 1)
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Poster ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rotate 180
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Skip Blank Pages
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Print Type
○ ○ ○ ○ ○ ○ ○ ○ ○
○
1-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Booklet (Device)
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Booklet (Driver)
× × × × × × × × ×
×
Binding Position
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Binding Margin
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Finish
Staple ○ ○ ○ ○ ○ ○ ○ × ○ ○
Center Staple and Fold
○ ○ ○ ○ ○ ○ ○ × ○
○
Punch ○ ○ ○ ○ ○ ○ ○ × ○ ○
Fold ○ ○ ○ ○ ○ ○ ○ × ○ ○
Output Tray
○ ○ ○ ○ ○ ○ ○ × ○
○
Paper Arrangement
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Prioritize Arranging Papers
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Prioritize Productivity
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Table 7-5 List of support functions of each model (5/9)
83 / 87
Page 84
KONICA MINOLTA, INC.
Function (6/9)
A3 BW
958/
808/
758
558/
458
367/
287/
227
754(e)/
654(e)
554e/
454e/
364e/
284e/
224e
368/
308
658e/
558e/
458e/
368e/
308e
306i
266i
246i
226i
750i
650i/
550i/
450i/
360i/
300i
Cover Mode
Front Cover
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Back Cover
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Front Cover from Post Inserter
○ ○ × ○ ○ × ○ × ○
○
Back Cover from Post Inserter
○ ○ × ○ ○ × ○ × ○
○
Transparency Interleave
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Stamp/Composition
Watermark
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Quality
Select Color
× × × × × × × × ×
×
Auto Color
× × × × × × × × ×
×
Gray Scale
× × × × × × × × ×
×
2 Color × × × × × × × × × ×
Resolution
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Toner Save
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Other
Quiet Mode
× × × × × × × × ×
×
Improve Print Output
× × × × × × × × ×
×
Device Settings
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Language Setting
○ ○ ○ ○ ○ ○ ○ ○ ○
○
About ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-6 List of support functions of each model (6/9)
84 / 87
Page 85
KONICA MINOLTA, INC.
Function (7/9)
A4 Color
A4 BW
C3851/
C3351/
C3851FS
C3350/
C3850/
C3850FS
C3100P
C3110
C4050i/
C3350i
C4000i/
C3300i/
C3320i
4750/
4050
4700P/
4000P/
3300P/
3301P
4020/
3320
4752/
4052
4702P/
4402P/
3602P
4422/
3622
5020i/
5000i/
4020i/
4000i
4750i/
4050i
4700i
Basic
Original Orientation
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Original Size
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Paper Size
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Zoom ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
Paper Tray
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Paper Type
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Copies ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
Collate ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
Offset ○ ○ × × × × × × × × × × × ×
×
Output Method
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
Store Job
× ○ ○ ○ ×
○
○
○ *2
○ × ○ *3
○ × ×
×
Print and Hold
× ○ ○ ○ ×
○
○
○ *2
○ × ○ *3
○ × ×
×
Secure Print
○ ○ ○ ○ ○
×
○
○ *2
○ ○ ○ *3
○ ○ ○
×
Save in User Box
○ × × × ○
× × × × ○ × × × ○
×
Save in User Box/Print
○ × × × ○
× × × × ○ × × × ○
×
Proof Print
○ ○ ○ ○ ○
○
○
○ *2
○ ○ ○ *3
○ × ○
○
ID& Print
○ ○ ○ ○ ○
× ○ × × ○ × × × ○
×
*2: Model =3300P,3301P、× *3: Model =3602P、×
Table 7-7 List of support functions of each model (7/9)
85 / 87
Page 86
KONICA MINOLTA, INC.
Function (8/9)
A4 Color
A4 BW
C3851/
C3351/
C3851FS
C3350/
C3850/
C3850FS
C3100P
C3110
C4050i/
C3350i
C4000i/
C3300i/
C3320i
4750/
4050
4700P/
4000P/
3300P/
3301P
4020/
3320
4752/
4052
4702P/
4402P/
3602P
4422/
3622
5020i/
5000i/
4020i/
4000i
4750i/
4050i
4700i
Authentication/Account Track
○ ○ ○ ○ ○
○ ○ × × ○ × × × ○
○
User Authentication
○ ○ ○ ○ ○
○ ○ × × ○ × × × ○
○
Enhanced Server
○ ○ ○ ○ ○
○ ○ × × ○ × × × ○
○
External Server
○ ○ × × ○
○ ○ × × ○ × × × ○
○
Device ○ ○ ○ ○ ○ ○ ○ × × ○ × × × ○
○
Account Track
○ ○ ○ ○ ○
○ ○ × × ○ × × × ○
○
Layout
Combination (N in 1)
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Poster ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○
Rotate 180
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Skip Blank Pages
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Print Type
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
1-Sided
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
2-Sided
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Booklet (Device)
○ × × × ○
○ × × × ○ × × × ○
○
Booklet (Driver)
× ○ ○ ○ ×
× ○ ○ ○ × ○ ○ ○ ×
×
Binding Position
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Binding Margin
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○
Finish
Staple ○ ○ × × × × ○ × × ○ × × × ×
×
Center Staple and Fold
× × × × ×
× × × × × × × × ×
×
Punch × × × × × × × × × × × × × ×
×
Fold × × × × × × × × × × × × × ×
×
Output Tray
× × × × ×
× × × × × × × × ×
×
Paper Arrangement
○ × × × ○
○ × × × ○ × × × ○
○
Prioritize Arranging Papers
○ × × × ○
○ × × × ○ × × × ○
○
Prioritize Productivity
○ × × × ○
○ × × × ○ × × × ○
○
Table 7-8 List of support functions of each model (8/9)
86 / 87
Page 87
KONICA MINOLTA, INC.
Function (9/9)
A4 Color
A4 BW
C3851/
C3351/
C3851FS
C3350/
C3850/
C3850FS
C3100P
C3110
C4050i/
C3350i
C4000i/
C3300i/
C3320i
4750/
4050
4700P/
4000P/
3300P/
3301P
4020/
3320
4752/
4052
4702P/
4402P/
3602P
4422/
3622
5020i/
5000i/
4020i/
4000i
4750i/
4050i
4700i
Cover Mode
Front Cover
○ × × × ○ ○ × × × ○ × × × ○ ○
Back Cover
○ × × × ○ ○ × × × ○ × × × ○ ○
Front Cover from Post Inserter
× × × × × × × × × × × × × × ×
Back Cover from Post Inserter
× × × × × × × × × × × × × × ×
Transparency Interleave
× × × × × × × × × × × × × × ×
Stamp/Composition
Watermark
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Quality
Select Color
○ ○ ○ ○ ○ ○ × × × × × × × × ×
Auto Color
○ ○ ○ ○ ○ ○ × × × × × × × × ×
Gray Scale
○ ○ ○ ○ ○ ○ × × × × × × × × ×
2 Color ○ ×
× × ○ ○ × × × × × × × × ×
Resolution
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Toner Save
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other
Quiet Mode
× × × × × × × × × × × × ○ × ×
Improve Print Output
× × × × × × × × × × × × ○ × ×
Device Settings
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Language Setting
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
About ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-9 List of support functions of each model (9/9)
87 / 87
Loading...